Which Wears Out Faster, Front or Rear Brake Pads?

2 Answers
MacMadison
07/29/25 1:47am
Front brake pads wear out faster than rear ones. Here is some relevant information about brakes: 1. Introduction: As the name suggests, it is a mechanical braking device that slows down the speed of a vehicle, also known as a decelerator. 2. Structure: The car brake pedal is located under the steering wheel. Pressing the brake pedal causes the brake linkage to be pressurized and transmitted to the brake pads on the brake drum, which then clamp the brake disc. 3. Function: To slow down or stop the vehicle. The manual brake of a car is located next to the gear shift and is connected to the brake lever. Common examples also include bicycle brakes, which rely on rod-shaped brakes fixed to the frame or disc caliper brakes to decelerate.
Was this review help?
1
5
Share
StGriffin
08/12/25 5:50am
I've been driving for over ten years and have noticed that the front brake pads always wear out faster than the rear ones. Every time I go for maintenance, the mechanic reminds me that the front brake pads need to be replaced more frequently. The reason is that when braking, the car's weight shifts forward, putting more pressure on the front wheels, which bear about 70% of the braking force. I drive a front-wheel-drive car, and the frequent stop-and-go traffic in the city accelerates the wear on the front brakes, while the rear brakes have it relatively easier. It's recommended to check the brake pad thickness every six months. Excessive wear can affect braking performance, and for safety, it's best to replace both front and rear brake pads together. Additionally, while there isn't much difference between car models, rear-wheel-drive vehicles might see slightly more balanced wear. Driving habits also play a significant role—avoiding sudden braking can extend the lifespan of the brake pads. In short, regular maintenance is crucial; don't wait until problems arise.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

What is the method to restore the transmission to factory settings?

To restore the transmission to factory settings, follow these steps while the vehicle is powered on: depress the accelerator pedal to the floor, turn off the ignition switch while keeping the accelerator pedal depressed. After power is cut off, release and then press the accelerator pedal again, wait for a few minutes, and the transmission will automatically reset to factory settings. Important Notes: The entire process does not require starting the vehicle; this function is completed while the vehicle is off. Do not touch the brake pedal. This reset is particularly useful for vehicles that have experienced improper usage leading to sluggishness or shifting issues, such as those frequently driven in slow-moving conditions or in congested urban areas. After performing the reset, allow the transmission to adapt to the driver's habits over time. Potential Risks of Transmission Reset: Resetting the transmission is not harmful; it simply requires the vehicle to readjust or be manually recalibrated. Modern vehicles have adaptive learning capabilities that adjust the transmission's shifting logic based on the driver's habits. After a reset, this learned information is erased, and the vehicle will need time to relearn the driver's patterns. Essentially, resetting the transmission only clears its adaptive learning program and does not significantly impact normal transmission operation.
1
3
Share

Correct Driving Steps for Automatic Transmission Cars

P stands for Park, R for Reverse, N for Neutral, D for Drive, and S for Sport mode. After understanding these, adjust your seating position and mirrors, then press the brake to start the ignition. If it's a cold start, the engine RPM might be higher initially; it's recommended to wait for about 30 seconds until the RPM returns to normal. Shift to D, release the handbrake or foot brake, and press the accelerator to start moving! First, when waiting briefly at a red light, keep the gear in D and hold the brake. If the wait exceeds 3 minutes, shift to N and use the handbrake; models equipped with AutoHold make this much easier—just lightly press the accelerator when the light turns green to move off. Second, while driving, you can seamlessly switch between S and D modes. Engaging S mode provides more direct power output, suitable for situations requiring extra power or overtaking. Third, after parking, simply shift to P, engage the handbrake, turn off the engine, and leave without any additional steps.
3
0
Share

Correct Driving Steps for Manual Transmission Cars

First, ensure the gear is in neutral and the handbrake is engaged. Then, press the clutch and brake pedals, start the engine, shift into first gear, and release the handbrake. Gradually lift the clutch with your left foot while simultaneously applying throttle with your right foot to successfully start the car. If the car is parked on a slope, complete the clutch lifting and throttle application while the handbrake is still engaged. Release the handbrake only after the vehicle has sufficient forward momentum.
11
3
Share

What are the consequences of driving without releasing the handbrake

Driving without releasing the handbrake can lead to very serious consequences. Short-term driving can cause wear on the brake discs or parking drum brakes, the brake pads to harden due to overheating, and the handbrake cable to stretch. The consequences include reduced braking performance, a burning smell inside the car, and in severe cases, smoke from the rear of the car or even a fire.
7
3
Share

Why Are Fewer People Buying Volvo?

Volvo's lower sales are primarily due to its high vehicle price and maintenance costs. Volvo maintains strict overall quality control and has very rigorous standards for automotive parts. While this ensures the reliability of Volvo's products in terms of quality, it also significantly increases costs, leading to higher vehicle prices. Additionally, this results in repairs being only possible at Volvo's own 4S stores, which to some extent creates difficulties in maintenance and higher expenses. Below is an introduction to Volvo: 1. Brand Introduction: Volvo Group (English: Volvo), a Swedish company now producing passenger cars, trucks, buses, construction equipment, yachts, and industrial engines, was founded in Gothenburg in 1927. The word 'Volvo' originally comes from Latin, meaning 'rolling forward.' 2. Brand Philosophy: Volvo's Nordic luxury approach is committed to providing worry-free mobility solutions in a personalized, sustainable, and safe manner.
11
2
Share

Which Hongqi models do not require political review?

Hongqi's S Series—New Noble Hongqi Coupe, H Series—New Noble Hongqi Mainstream Cars, and Q Series—New Noble Hongqi Business Travel Cars do not require political review when purchasing. Below is relevant information about Hongqi: 1. Brand Philosophy: Chinese-style New Noble Refinedism. The new Hongqi will highlight the concepts of new nobility, new refinement, and new sentiment, deeply integrating China's excellent culture with world advanced culture, modern fashion design, cutting-edge technology, and meticulous emotional experiences to create outstanding products and services. 2. Strategic Goal: To build the new Hongqi into China's premier and world-renowned new noble brand, meeting consumers' pursuit of a better life and wonderful travel in the new era, and shouldering the historical mission of strengthening China's automotive industry.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.