Which Volkswagen models do not have a rear floor hump?

1 Answers
SimonFitz
07/30/25 3:19am
All Volkswagen vehicles have a rear floor hump, which is designed to accommodate the exhaust pipe and drive shaft. The chassis of sedans is relatively low, and without this hump to house the exhaust pipe, scraping could occur on certain road surfaces where the exhaust pipe is positioned too low. Many four-wheel-drive and rear-wheel-drive vehicles also feature a rear hump, which not only accommodates the exhaust pipe but also the drive shaft, making the hump more pronounced in these models. The Volkswagen Group encompasses eight brands: Volkswagen Commercial Vehicles, Volkswagen Passenger Cars, ŠKODA, Bentley, Bugatti, Porsche, Scania, and MAN.
Was this review help?
14
5
Share
More Forum Discussions

What is the range of the 2019 Lavida Pure Electric?

The 2019 Lavida Pure Electric has a range of 278km. Taking the 2019 Lavida Pure Electric Premium Edition as an example: this car is manufactured by SAIC Volkswagen, classified as a compact car, with an energy type of pure electric. It has a maximum power of 100kw, maximum torque of 290nm, and is equipped with a single-speed electric vehicle transmission. The body type is a 4-door, 5-seater sedan. The car's dimensions are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2680mm. The drivetrain is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
7
3
Share

What does it mean when the right rear tire pressure is lost?

A warning about the loss of pressure in the right rear tire indicates that the tire pressure is abnormal and requires calibration. Only vehicles equipped with a tire pressure monitoring system (TPMS) will display this alert. TPMS can promptly reflect tire conditions, eliminate safety hazards, and extend tire lifespan. There are three common methods of tire pressure monitoring: Direct Tire Pressure Monitoring: Direct TPMS uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure data for each tire. The system automatically alerts when the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotational speeds between the tires, the system monitors the tire pressure. Indirect TPMS essentially relies on calculating the rolling radius of the tires to monitor pressure. Tire Pressure Monitoring System (TPMS) Introduction: This system combines the advantages of both the direct and indirect systems. It installs direct sensors in two diagonally opposite tires and incorporates a 4-wheel indirect system. Compared to a full direct system, this hybrid approach reduces costs and overcomes the limitation of indirect systems, which cannot detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as effectively as a full direct system.
14
1
Share

How often should the gear oil of UY125 be changed?

UY125 gear oil should be changed every 1000 kilometers. Gear oil is a type of lubricating oil primarily composed of petroleum-based lubricating oil or synthetic lubricating oil, with the addition of extreme pressure anti-wear agents and oiliness agents. Gear oil mainly serves to lubricate gears and bearings, prevent wear and rust, and assist in heat dissipation for gears. It is used in various gear transmission devices to extend their service life and improve power transmission efficiency. Taking the Jinan Suzuki UY125 as an example: the dimensions of this model are 1890mm in length, 685mm in width, and 1090mm in height, with a curb weight of 112 kilograms, and it features a CVT continuously variable transmission.
9
0
Share

How to Adjust the Dashboard Brightness of Mercedes-Benz C200?

The method to adjust the dashboard brightness of Mercedes-Benz C200 is to locate a separate switch next to the light control knob on the center console, which is the dashboard light button. Pressing this button allows you to adjust the brightness. Taking the Mercedes-Benz C-Class 2021 C200L Dynamic Sport Edition as an example: The manufacturer of this car is Beijing Benz, classified as a mid-size car with a gasoline energy type. The dimensions of this car are 4784mm in length, 1810mm in width, and 1457mm in height, with a wheelbase of 2920mm. It features a turbocharged intake form, rear-wheel drive, electric power steering, and a unibody structure.
11
3
Share

What does reverse mean in a car?

reverse in a car refers to the reverse gear, which is one of the three standard gears in a vehicle. It is marked as R on the gear console and is designed to allow the vehicle to move backward. It is a special driving gear, and it is essential to ensure the vehicle is completely stopped before engaging the reverse gear. An automatic transmission typically refers to a car's automatic gear-shifting mechanism, where the control system of the automatic transmission selects the appropriate gear based on the engine's speed and load during driving, replacing the driver's subjective judgment and gear-shifting operations. A typical automatic transmission car has six gear positions, arranged from top to bottom as: P, R, N, D, S, L.
7
1
Share

How to Solve the Problem of Lower Car Idle Speed Than Before?

To address the issue of lower car idle speed than before, the solution involves cleaning the throttle body and also cleaning the air filter. When the engine is running without load, it is referred to as idling. When the accelerator pedal is fully released while the engine is running, the engine enters the idle state. The idle speed can be adjusted by modifying the throttle opening size, among other methods. Generally, the optimal idle speed is the lowest RPM at which the engine does not vibrate. Idling is necessary to overcome the engine's internal resistance and maintain a low RPM, providing convenience for drivers in various driving conditions and temporary stops, such as waiting at traffic lights or in congested traffic. Although the duration may be brief, temporarily turning off the engine can significantly improve fuel efficiency and reduce emissions.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.