Which vehicles use the ZF 8AT transmission?

1 Answers
MilaDella
09/08/25 2:13am
Vehicles equipped with the ZF 8AT transmission include the Haval H8 and the BMW 3 Series produced by Brilliance Auto. Below are relevant details: Background of the ZF 8AT transmission: ZF is one of Germany's most renowned automotive component manufacturers, with a global customer base similar to Aisin. Beyond automobiles, its components are widely used in aircraft, tanks, and marine vessels. Precautions for using the ZF 8AT transmission: Oil level inspection should only be performed when the engine is off, the vehicle is parked on level ground, and the transmission is cooled down. Remove the filler plug to check the oil level; transmission fluid should reach the bottom of the filler hole. If the level is low, add transmission fluid until it begins to overflow from the filler hole, then reinstall the plug.
Was this review help?
7
5
Share
More Forum Discussions

Where is the transmission oil filler port for the Haval H7?

Haval H7 transmission oil filler port is located at the bottom of the transmission. Here is more information about transmission oil: 1. Function: Transmission oil is used in vehicle transmissions to keep the gear system clean. It cleans and lubricates the gear system, extends the lifespan of transmission components, and provides cleaning, lubrication, rust prevention, and heat dissipation. 2. Classification: Depending on the transmission structure, transmission oil is divided into automatic transmission fluid (ATF) and manual transmission oil. 3. Replacement interval: Generally, it should be replaced every 3 years or approximately 100,000 kilometers.
10
2
Share

What happens if the car is left idling for a long time?

Leaving the car idling for a long time can lead to carbon buildup inside the engine. When the engine is idling while parked, the combustion process is actually incomplete, resulting in the formation of significant carbon deposits inside the engine. If the engine remains in an idling state for an extended period, sludge can also accumulate inside the engine. If carbon deposits form on the piston tops, it can increase the engine's compression ratio, leading to engine knocking. Knocking can cause increased fuel consumption and reduced power output, and it is also harmful to the engine itself. Severe knocking can even result in connecting rod deformation or piston cracking.
5
5
Share

What are the reasons for a motorcycle's inability to accelerate?

Motorcycle's inability to accelerate can be attributed to the following reasons: Low fuel: A lean air-fuel mixture causes insufficient gas pressure on the piston after ignition, prolongs combustion time, and leads to engine overheating. Signs of a lean mixture include poor acceleration during operation, which improves when manually adjusting the choke or pumping fuel, but returns to weak acceleration without enriching the mixture. This indicates the motorcycle is running on a lean mixture. Excessive fuel: A rich air-fuel mixture results in poor acceleration at low speeds. A rich mixture lacks sufficient oxygen during combustion, leading to incomplete combustion, reduced power, poorer fuel efficiency, and the accumulation of carbon deposits that can clog the exhaust system, exacerbating the acceleration issues.
1
3
Share

Is the Nissan X-Trail equipped with a timing belt or a timing chain?

Nissan X-Trail uses a timing chain. The main function of the engine timing belt is to drive the engine's valve train, ensuring that the intake and exhaust valves open and close at the appropriate times to allow normal air intake and exhaust in the engine cylinders. The Nissan X-Trail is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 111kW at 6,000 rpm and a maximum torque of 194Nm at 4,400 rpm. The dimensions of the Nissan X-Trail are 4,675mm in length, 1,820mm in width, and 1,722mm in height, with a wheelbase of 2,706mm.
12
1
Share

What does the ABS light indicate?

ABS light on indicates a fault in the ABS system. If both the ABS warning light and the brake system warning light illuminate while driving, it means there are faults in both the ABS and brake systems, and the braking characteristics will change. In the latter case, you must stop driving immediately, check the brake fluid level, and have it inspected by a professional. If the fluid level is normal but the ABS system's regulation function fails, the ABS light will stay on, and only the regular braking system will work. This can easily cause the rear wheels to lock up quickly during braking, leading to skidding. In this situation, drive cautiously and proceed to the nearest repair shop or 4S dealership for maintenance.
11
0
Share

What does EPC in a car mean?

EPC in a car stands for the Electronic Power Control system, which typically supports the functions of ABS and ASR. When the EPC light appears on the dashboard, it indicates a fault in the engine or electronic system. If the light remains constantly illuminated or flashes during ignition or while driving, it means the management system has detected an issue with the engine or electronic system. Reasons for the EPC light to illuminate include: 1. Faults in the intake system, such as leaks or blockages; 2. Dirty throttle body with excessive carbon buildup; 3. Use of substandard fuel; 4. Abnormal cylinder pressure or poor operating conditions; 5. Occasional faults or false alarms; 6. Valve faults, sticking, or carbon buildup; 7. ECU malfunction.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.