Which Vehicles Can a C1 Driving License Drive?

2 Answers
Travis
07/28/25 9:36pm
According to China's 'Regulations on the Application and Use of Motor Vehicle Driving Licenses': The C1 driving license permits driving small and mini passenger vehicles, as well as light and mini cargo vehicles; light, small, and mini special-purpose vehicles. Moreover, a C1 license allows driving vehicles permitted by C2, C3, and C4 licenses, including automatic transmission small cars, light and mini automatic transmission cargo vehicles, low-speed cargo vehicles, and three-wheeled vehicles. C1 License Test: The test subjects include four items: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge. Passing Standards: Traffic Regulations and Related Knowledge (Subject 1) – Written test, full score of 100, passing requires 90 or above. Field Driving (Subject 2) – On-site, actual vehicle. Minimum requirement is 80, below 80 is a fail. Road Driving (Subject 3) – Highway or simulated site, actual vehicle. Full score of 100, must achieve 90 or above to pass. Safe and Civilized Driving Knowledge – Written test, questions mainly in the form of cases, pictures, animations, etc., including true/false, single-choice, and multiple-choice questions, totaling 50 questions, full score of 100, passing requires 90 or above.
Was this review help?
10
2
Share
GabrielLynn
08/12/25 2:13am
The C1 driver's license allows you to drive quite a variety of vehicles, mainly small and micro-sized ones. I often drive family sedans or compact SUVs, which are all within the permitted scope, as long as the total vehicle weight does not exceed 4.5 tons. For example, small vans like the Wuling Hongguang can also be driven, making it very convenient for transporting small loads. However, the C1 license does not permit driving buses or large trucks—for instance, overloaded pickup trucks would require a higher-grade license like a B-class license. The C1 license also allows driving automatic transmission vehicles, making daily commutes hassle-free. Driving these small cars has many benefits: they are fuel-efficient, agile, and easy to park in the city, so new drivers can start driving without much pressure after getting their license. They are also sufficient for occasional long trips or outings, but remember to check the vehicle specifications before purchasing to avoid overloading or violations. In short, the C1 license covers most everyday vehicle needs, making it both practical and safe.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

Where is the high beam switch on the Sylphy?

The high beam switch on the Sylphy is located on the light control lever on the left side of the steering wheel. Here is some information about the Sylphy: 1. Introduction: The Sylphy is a mid-size car under Dongfeng Motor Co., Ltd. and is one of the most typical mainstream family sedans in the Chinese market. 2. Powertrain: It is equipped with a 1.6L naturally aspirated engine that meets the China VI emission standards, with a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm. The transmission system is paired with a CVT gearbox. 3. Features: It comes with the new Nissan Connect super-intelligent system, featuring an 8-inch HD capacitive touchscreen, which includes functions such as voice control and remote control of the vehicle.
13
5
Share

What does TC mean when displayed on a vehicle?

TC stands for Traction Control System, which enhances the vehicle's passability. When the ABS (Anti-lock Braking System) detects wheel slippage, it applies braking to the slipping wheel to prevent traction loss. During system operation, the yellow TC indicator on the dashboard flashes to alert the driver. Below is more information about the Traction Control System: 1. The Traction Control System is also known as the Track Control System. When braking on slippery surfaces, wheels may skid, potentially causing loss of directional control. Similarly, during acceleration or sudden starts, drive wheels may slip, especially on icy or slippery roads, leading to dangerous loss of control. The Traction Control System is designed to address these issues. 2. The Traction Control System uses electronic sensors to detect when driven wheels rotate slower than non-driven wheels (indicating slippage). It then sends signals to adjust ignition timing, reduce throttle opening, downshift, or apply braking to stop wheel slippage. 3. The Traction Control System improves driving stability, acceleration performance, and hill-climbing capability.
19
1
Share

What Causes Abnormal Noise from Tires When Turning a Car?

Car tires squeaking when turning is the sound of friction between rubber and the ground, which is a normal phenomenon. This occurs because the car's inertia is forward during a turn, while the tires experience resistance friction with the ground. When car tires contact the ground, various levels of noise can be produced due to the type or unevenness of the road, the vehicle's speed, the type of tires, and the tire's air pressure. Other reasons for abnormal noise from tires when turning a car are as follows: 1. If it's the sound of tires rubbing against the ground, realignment may be needed. 2. If it's a rattling sound, it could indicate a faulty CV joint, which requires replacement. 3. If it's a metallic scraping sound, it might be the brake pad shield rubbing against the brake pad. This can often be fixed by prying the shield slightly with a screwdriver.
5
3
Share

What are the causes of a minivan's radiator boiling over?

The causes of a minivan's radiator boiling over are: 1. Insufficient water level; 2. Radiator blockage, resulting in poor circulation and backflow; 3. Radiator leakage obstructing water circulation; 4. Abnormal operation of the thermostat's large and small circulation switching; 5. Damage to the cooling fan or short circuit in the wiring causing the fan to stop working, or very slow fan speed; 6. Issues with the fan's water temperature sensor. Additional information: Solutions for a minivan's radiator boiling over are: 1. When the vehicle experiences radiator boiling, promptly pull over to a safe area, keep the engine idling for 3 to 5 minutes, and after the situation eases, turn off the engine and open the hood to cool down; 2. After the engine cools, open the radiator cap, replenish the coolant, and drive the vehicle for inspection to identify and resolve the issue.
17
5
Share

How to reset the maintenance light for a 2019 H6 1.5T?

Press and hold the trip meter reset button on the combination instrument panel. Here is some relevant information about the maintenance light: 1. Introduction: The maintenance light is a reminder function set by the manufacturer to alert the vehicle owner to perform maintenance at certain mileage or time intervals. It appears in the form of a dashboard or screen message or indicator light. Resetting the maintenance light means clearing the reminder information after maintenance is completed, which is essentially an information reset. 2. Function: The purpose of the maintenance light is to record the mileage of important components, much like a timer in a sprint race. It serves as a reminder for both the vehicle owner and automotive repair personnel. If the owner replaces related components but does not reset the light, it will not affect the vehicle's performance. However, it may cause inconvenience for the next replacement, as it will be difficult to accurately track the usage time of the new components.
13
2
Share

How to manually reset the maintenance light on the diesel Maxus V80?

Turn on the ignition while holding down the trip meter hour reset button. Here is some relevant information about the maintenance light: 1. Introduction: The maintenance light is a reminder function set by the manufacturer to notify the owner to perform maintenance at certain mileage or time intervals. It appears in the form of a dashboard or screen message or indicator light. Resetting the maintenance light means clearing the reminder information after maintenance is completed, which is essentially a reset of the information. 2. Purpose: The purpose of the maintenance light is to record the mileage of important components, similar to a timer in a sprint race, serving as a reminder for the owner and automotive repair personnel. If the owner replaces related components but does not reset the light, it will not affect the vehicle's performance, but it may cause inconvenience for the next component replacement, as the exact usage time of the new component cannot be accurately determined.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.