···
Log in / Register

Which type of engine oil is generally used for the Tiida?

4 Answers
BrantleyMarie
07/29/25 8:53pm

Tiida generally uses 5W-30 engine oil. Below are the relevant details about the Tiida: 1. Body Dimensions: The Tiida has a length, width, and height of 4393/1766/1539 mm, a wheelbase of 2700 mm, and a trunk capacity of 435L. The interior space performance can meet most travel needs. 2. Powertrain: In terms of power, the Tiida is equipped with an HR16 1.6L engine, with a rated power of 122 horsepower (90 kW) and a maximum torque of 155 N·m. The transmission system is paired with either a 5-speed manual or CVT gearbox. 3. Smart Features: The Tiida is equipped with the Nissan-Connect super intelligent system, which includes six major functional modules: remote vehicle control, voice control, in-car online services, remote real-time monitoring, all-time online navigation, and online audio-visual entertainment.

Was this review help?
12
3
Share
ORonan
08/15/25 6:34pm

I've been driving my Nissan Tiida for seven years, always using 5W-30 full synthetic oil, especially brands like Castrol or Mobil, which provide excellent engine protection. This viscosity grade suits most weather conditions - quick starts in winter and no overheating during summer highway driving. I maintain an oil change interval of every 6,000 km or six months. Checking oil level is super easy: park the car, turn off the engine, wait a few minutes, pull out the dipstick, wipe it clean, reinsert it, then check - the oil level should be between the minimum and maximum marks. If the oil appears black or contains impurities, change it earlier. For the first few years of a new car, thinner 0W-20 oil can be used, but considering the Tiida's compact engine design, 5W-30 offers the best balance between fuel efficiency and durability - don't randomly change viscosity. Regular maintenance helps prevent issues like engine noise or oil burning.

Was this review help?
19
1
Share
Expand All
PrestonLee
10/16/25 7:09am

From an engine perspective, the Tiida recommends 5W-30 synthetic oil because it flows quickly at low temperatures and maintains stable viscosity at high temperatures, reducing internal friction and protecting components. Older models work best with 5W-30, while newer models may be suited for 0W-20—check the manual for specifics. Using the wrong oil, such as high-viscosity 10W-40, may lead to insufficient oil pressure or increased fuel consumption. When changing the oil, it's best to replace the oil filter as well, opting for reputable brands like Shell or Total. The maintenance interval is every 5,000 to 8,000 kilometers, heavily influenced by driving habits; frequent stop-and-go traffic or short trips require more frequent changes. When checking oil levels, ensure the car is parked on level ground—oil that is too thin or black and sludgy signals potential engine issues.

Was this review help?
3
4
Share
Expand All
McRosalie
11/29/25 7:56am

The Tiida is very reliable with 5W-30 oil. I use synthetic type for economy and efficiency. It drives smoothly in the city with responsive engine performance and remains stable on highways. DIY maintenance saves the most money—just change the oil every 7,000 km following the factory standard. Regularly check the dipstick to avoid oil shortage, but overfilling is counterproductive. For aggressive driving conditions, a high-protection formula can be chosen, but 5W-30 is already durable enough. Keep maintenance simple to extend engine life.

Was this review help?
9
3
Share
Expand All
More Forum Discussions

What to Do If Your Car Is Scratched by Someone and You Can't Find the Culprit?

In such a special situation, you should call the police immediately and let the traffic police handle the accident judgment. Do not impulsively chase the other vehicle. At the same time, you can retrieve the footage from your dashcam to prove the other party's illegal behavior. Then, call your insurance company and have them send a specialist to assess the damage and process the claim. The specific steps are as follows: 1. Call the police: Report the incident immediately. If the scratch occurs on a main road with no injuries, take photos of the collision area and the entire car for evidence, then move your car to a place where it does not obstruct traffic and wait for further instructions. 2. Accident determination: After the traffic police arrive, they will issue an accident liability determination report. 3. Report to insurance: Wait for the insurance company to send a specialist to assess the damage. 4. Wait for results: You can then wait for the damage assessment results and proceed to repair your car.
8
4
Share

What are the effects of bad car bearings?

Effects of bad car bearings: 1. Abnormal friction between the brake drum and brake pads significantly increases driving resistance, reduces rolling smoothness, and leads to decreased power; 2. Affects comfort; 3. Causes the vehicle to pull to one side and increases tire noise; 4. Leads to suspension damage; 5. Damages the wheel mechanism, potentially causing the wheel hub to detach; 6. Results in steering system failure. The function of car bearings is to bear weight and provide precise guidance for the rotation of the wheel hub. Maintenance methods for car bearings: 1. Remove the wheel hub, scrape off the old grease from the bearings, axle neck, and wheel hub cavity, clean the wheel hub bearings and axle neck with a cleaning agent, wipe them dry with a cloth, and clean the inner cavity of the wheel hub; 2. Apply grease to the inner cavity of the bearings.
12
1
Share

What are the perfect repair methods for rusted and rotten side skirts?

For perfect repair of rusted and rotten side skirts, use touch-up paint or go to a 4S shop for polishing and welding depending on the situation. Not serious: If the rust is not very serious, it can be solved with touch-up paint. Use ultra-fine water sandpaper with water to polish in the same direction until the rust is removed. After cleaning, apply primer, wait for it to dry, then sand it with water sandpaper, and finally apply the small can of original paint that came with the car. This counts as rust prevention treatment. Serious: If the rust is severe, it is necessary to go to a 4S shop for repolishing and welding. During the sheet metal repair process of the side skirt, high-temperature welding is required, which will damage the anti-corrosion layer of the original car sheet metal. After sheet metal repair, rust-proof wax can be used for internal rust prevention.
15
3
Share

How to Reset the Sunroof of Volvo XC60?

Here are the specific methods to reset the sunroof of Volvo XC60: 1. Component Aging: Press the sunroof switch button and observe the movement track of the sunroof. Check if there is any obvious up-and-down fluctuation. If so, it is likely due to component aging, and the only solution is to replace the components. 2. Presence of Debris Particles: After prolonged use, it is inevitable for some debris particles to accumulate on the sliding track. When the sunroof moves along the track, it rubs against these particles, causing abnormal noises. Open the lubricant and apply it to both sides of the sunroof's sliding track. 3. Loose Screws: Loose screws can lead to abnormal noises from the roof and the sunroof, and even pose a risk of the sunroof falling off. Simply tighten the sunroof screws to resolve this issue.
6
2
Share

What does maximum engine torque mean?

Engine maximum torque is related to the design of the engine's intake system, fuel supply system, and ignition system. At a certain speed, when these systems' performance is optimally matched, maximum torque can be achieved, usually within the engine's medium to low-speed range. As speed increases, torque tends to decrease. Below is a related introduction: 1. Definition of automobile torque: It refers to the moment output from the crankshaft end of the engine; under fixed power conditions, it has an inverse relationship with engine speed—the faster the speed, the smaller the torque, and vice versa, reflecting the vehicle's load capacity within a certain range. Like power, automobile torque is one of the main indicators of an engine, reflected in vehicle performance, including acceleration, climbing ability, and suspension. 2. Is higher automobile torque always better? Generally speaking, higher torque is better. For family cars, higher torque means better acceleration; for off-road vehicles, higher torque allows for steeper climbing; for trucks, higher torque enables greater load capacity.
4
2
Share

What is the fuel consumption of the Mazda CX4?

Mazda CX4 has a fuel consumption of 7.9 liters per 100 kilometers. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: When starting at low speeds, the car consumes the most fuel. Therefore, gently pressing the accelerator during startup to prevent excessively high RPM can effectively reduce fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Change the engine oil and remove carbon deposits. 4. Avoid emergency braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel. For example, gradually slowing down before traffic lights and utilizing inertia to glide.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.