Which Type of Car Chassis Armor is Better?

1 Answers
Walker
07/29/25 7:40pm
Here is the relevant introduction to car chassis armor: 1. In terms of usage: Resin oil-based type is the traditional chassis armor, focusing on protection, and the texture feels relatively thin after application. 2. AC rubber type: AC rubber type is the chassis armor developed by Leidun Holdings, emphasizing "sound insulation and vibration reduction," and the texture feels thicker after application; the rubber type requires relatively higher technical skills for application. 3. Resin oil-based type: Currently, the 1-liter small bottle packaging of resin oil-based type, besides its lightweight packaging, the oil-based chassis paint is more diluted, making it more suitable for spraying in ordinary auto repair shops. The price is also not high, and the application is more convenient, providing consumers with more choices; remember, no matter the brand, choose oil-based pure resin material.
Was this review help?
13
0
Share
More Forum Discussions

What is the standard size of motorcycle tires?

Motorcycle tire specifications are 205, 65, R17, 92V. Types of tires: Classified by vehicle type, by purpose, by size, by tread pattern, and by construction. According to vehicle types, they can basically be divided into 8 categories: PC—passenger car tires, LT—light truck tires, TB—truck and bus tires, AG—agricultural vehicle tires, OTR—engineering vehicle tires, ID—industrial vehicle tires, AC—aircraft tires, MC—motorcycle tires. Tire speed ratings: Usually represented by letters and numbers, the speed rating indicates the maximum speed at which the tire can carry a specified load under specified conditions.
20
4
Share

How to Solve Excessive Engine Exhaust Temperature?

Engine exhaust temperature too high solutions and causes: 1. The engine cooling system lacks antifreeze, and there may be leakage points such as water pump leakage, damaged pipes, or radiator damage. 2. The thermostat in the engine cooling system malfunctions, causing the water temperature to be too high. 3. The thermostat fails to open, obstructing the flow of coolant inside the engine. 4. The cooling fan in the engine cooling system is not working properly. 5. The water pump in the engine cooling system malfunctions. 6. The water pump does not rotate smoothly, resulting in poor coolant flow, which causes the water temperature warning light to come on and the coolant temperature to be too high.
6
3
Share

Does the engine need to be disassembled after static water ingress?

If the water level is higher than the engine air intake, it needs to be removed. Water level higher than the engine air intake: The engine intake pipe and spark plugs need to be removed to check if water has entered the engine interior. Static water ingress repair: If confirmed as static water ingress, internal engine components such as pistons, connecting rods, crankshaft, and valve train have not been damaged by water pressure impact. Therefore, remove the spark plugs to eliminate moisture, rotate the crankshaft to expel water from the cylinders and intake system, replace the air filter, engine oil, and oil filter, and dry the engine ignition system and related electrical components. Replace relevant electrical parts if necessary.
13
5
Share

Is Heavy Steering Wheel a Common Issue with the Excelle?

Heavy steering wheel in the Excelle may be caused by issues with tire pressure. New cars typically come with tire pressure close to 3.0, while the normal level should be around 2.4. The Excelle has a tire pressure label on the driver's side front door frame, indicating the original tires and corresponding tire pressure. If the tire pressure is too low, the steering wheel may feel heavier. Below are methods to check for heavy steering wheel in the Excelle: 1. Inspect various aspects for issues: Additionally, check if there is soundproofing cotton or dirt wrapped around the steering gear, and verify if there are any problems with the electronic power assist. The power assist adjusts according to speed. 2. Electronic power steering system: It is normal for the electronic power steering system to become heavier at high speeds and lighter at low speeds, as this is a safety protection feature.
12
1
Share

What are the types of motorcycle license tests?

The "Regulations on the Application and Use of Motor Vehicle Driving Licenses" classify motorcycle licenses into three types: D, E, and F. Among them, D is for ordinary three-wheeled motorcycles, E is for ordinary two-wheeled motorcycles, and F is for light motorcycles. Permitted vehicles for D license: Can drive ordinary three-wheeled motorcycles (with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h) and E. Permitted vehicles for E license: Can drive ordinary two-wheeled motorcycles (with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h) and F. Permitted vehicles for F license: Can drive light motorcycles (with an engine displacement less than or equal to 50ml and a maximum design speed less than or equal to 50km/h).
9
1
Share

What is the difference between 110v and 220v?

Differences are as follows: 1. Different voltages: The biggest difference between 110v and 220v is the voltage. 220V transmission consumes less electricity than 110v, and under the same wire conditions, it can effectively reduce energy loss compared to 110V. The wire cross-section for 220v transmission of the same power is reduced, saving a large amount of non-ferrous metals. 2. Transmission distance: 220V voltage has smaller losses in long-distance transmission, effectively reducing energy loss compared to 110V, resulting in lower electricity costs. 3. Wire cross-sectional area: For transmitting the same amount of electricity under the same transmission loss conditions, the wire cross-sectional area used for 220V voltage is half that of 110V, saving wire metal materials.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.