···
Log in / Register

Which turn signal to use when turning right?

5 Answers
Evelyn
07/29/25 2:07am

Turn on the right turn signal when turning right. Right turn signal: The right turn signal should be activated in advance when making a right turn, changing lanes to the right, returning to the original lane after overtaking, or pulling over to park. Driving precautions: Road conditions are ever-changing, unlike the fixed objects and routes in driving schools. Therefore, before reaching 5,000 kilometers, don't just focus on developing a feel for the car. First, drive steadily and safely. If you encounter a situation you can't handle, slow down or stop. Follow traffic rules: First and foremost, obey traffic lights. Secondly, use your lights properly to create a good traffic environment. Some novice drivers may think their driving skills are already mature, leading to behaviors like speeding that violate traffic rules. Accidents can then occur, so drivers at this stage should pay the most attention to following traffic rules.

Was this review help?
18
2
Share
EvaFitz
08/12/25 12:07pm

As a seasoned driver with over 20 years of experience, I never hesitate to turn on my right turn signal when making a right turn. This isn't an optional habit—it's a safety essential. I remember last winter seeing a new driver turn right without signaling, almost causing a rear-end collision and major traffic jam. Since then, I've been even more committed: activating my right turn signal 50 to 100 meters before turning, clearly communicating my intentions to surrounding drivers and pedestrians. It's not just traffic rules—it's a small action that saves lives, something I often share with younger friends. Developing this habit can prevent 90% of accidents. Think about it: during urban rush hours with dense traffic flow, turn signals are silent communication. A right turn signal clearly conveys direction, reducing misunderstandings. These details make everyday driving smoother and safer.

Was this review help?
17
3
Share
Expand All
Lois
10/02/25 3:37am

I've only had my driver's license for a little over a year. As a novice driver, my instructor repeatedly emphasized always turning on the right turn signal when making a right turn. The first time I drove on the road, my palms were sweaty with nervousness, but I kept the rule in mind: gently press the turn signal lever with my right hand to activate the right turn light. This action helped me align with the turning point and also kept the following vehicles at a safe distance. Once at an intersection, I almost forgot to signal, and the immediate honking from nearby cars reminded me. Since then, I've practiced until it became second nature—turning on the right signal for a right turn is as crucial as fastening the seatbelt. It reflects a responsible attitude towards others, especially during peak hours when traffic conditions are complex. Failing to signal can easily result in fines or collisions. I recommend more simulation training to make it instinctive, reducing mistakes while driving.

Was this review help?
18
2
Share
Expand All
LilaLynn
11/15/25 5:21am

The turn signal is a basic yet crucial component, something I deeply realized while learning to drive. When turning right, activate the right turn signal to clearly indicate your direction. In modern car designs, turn signals are controlled by electronic switches—just a simple press to activate. It's not just a legal requirement; it significantly enhances road communication efficiency. For instance, at busy intersections, it helps pedestrians and other drivers anticipate your moves, avoiding blind-spot collisions. At car enthusiast meetups, we've discussed how many accidents stem from failing to signal. So, developing the habit of signaling early can greatly improve overall driving safety.

Was this review help?
1
2
Share
Expand All
VonGabriella
01/05/26 6:57am

When teaching my son to drive, I always nag: Sweetheart, remember to turn on the right turn signal when turning right. It's not an unnecessary step, but a small act that protects yourself and others. Once during a family trip, he forgot to signal, and a nearby cyclist almost collided with us. Afterward, I patiently explained the purpose of the signal—to illuminate it 50 meters in advance, notifying all participants. Safe driving starts with the details; turning on the right signal makes your intentions clear and reduces misjudgments. As a father, I emphasize that every turn should follow this practice, forming an instinctive reaction for reliability.

Was this review help?
16
1
Share
Expand All
More Forum Discussions

Do You Need to Press the Clutch and Brake When Starting a Manual Transmission Car?

When starting a manual transmission car, you need to press the clutch and brake. First, ensure the parking brake is engaged and check that the gear lever is in the neutral position. Press the clutch pedal all the way down with your left foot and turn the ignition to start the engine. Each starting attempt should not exceed 5 seconds. Once the engine stabilizes at idle speed, you can begin driving. The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the transmission, thereby cutting off or transmitting power from the engine to the transmission.
19
0
Share

Can the Baojun 530 automatically close the windows when locking the car?

Baojun 530 cannot automatically close the windows when locking the car. The Baojun 530 does not have the function of remotely raising the windows. Only when the unlock button is pressed and held, the windows of all four doors will lower, but pressing the lock button will not raise the windows. One-touch window raising is a circuit control system installed in the car for operating the windows. The Baojun 530 comes from SAIC-GM-Wuling and is positioned as a compact SUV. The front of the Baojun 530 features a hexagonal grille with dual chrome slats, and the headlights on both sides adopt a split-type design. The dimensions of the Baojun 530 are 4655mm in length, 1835mm in width, and 1760mm in height, with a wheelbase of 2750mm.
9
5
Share

Where to Check the Mileage on the New Audi A3?

New Audi A3's mileage can be viewed on the odometer, which is located on the dashboard of the Audi A3. Introduction to the Odometer: The Audi A3 odometer is divided into total mileage and trip mileage. The trip mileage can be used to record the driving distance from point A to point B, assist in calculating fuel consumption, and determine new maintenance intervals. The total mileage records the cumulative driving distance of the vehicle from the factory to the present. How the Odometer Calculates: The diameter of the car's wheels is known, and the circumference of the wheels remains constant. This allows for the calculation of how many rotations the wheels make per mile traveled. Therefore, by automatically accumulating the number of wheel rotations and dividing by the number of rotations per mile, the driving mileage can be obtained.
3
5
Share

Is the displacement of the Mercedes-Benz C200L 2.0T?

The Mercedes-Benz C200L has a 2.0T displacement, and approximately 4.5 liters of engine oil is sufficient for the 2.0T Mercedes-Benz C200L. Meaning of displacement: Displacement, a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or discharged per stroke or cycle. The displacement of a car is an important parameter to measure a vehicle. Some domestic cars do not have the car model marked as above, but their displacement is generally indicated on the body or rear of the car. Economy of corresponding displacement: The engine's displacement determines the car's fuel consumption. The larger the displacement, the higher the fuel consumption and the stronger the power, but small-displacement engines generally have poor adaptability.
3
0
Share

What is the reason why the vehicle cannot be locked when the transmission is in gear N?

N gear represents neutral and cannot lock the car. The gear should be adjusted promptly. The following is a detailed introduction to the transmission: 1. Composition: The transmission, also known as the gearbox, is used to change the speed and torque from the engine. The transmission consists of a transmission mechanism and a control mechanism. Some cars also have a power output mechanism. It can be divided into stepped, continuously variable, and integrated transmissions, with functions such as enabling reverse driving, interrupting power transmission, and changing the transmission ratio. 2. Main functions: (1) Change the transmission ratio to expand the range of changes in the torque and speed of the driving wheels to adapt to frequently changing driving conditions, while allowing the engine to operate under favorable conditions (higher power and lower fuel consumption). (2) Enable the car to drive in reverse while maintaining the same rotation direction of the engine. (3) Use neutral to interrupt power transmission, allowing the engine to start, shift gears, and facilitate gear shifting or power output in the transmission.
12
3
Share

What are the dimensions of the new Volvo S60?

In terms of body dimensions, the Volvo S60 measures 4761X1850X1437mm in length, width, and height, with a wheelbase of 2872mm. Exterior of the Volvo S60: The new Volvo S60 maintains its previous design, featuring the iconic Thor's Hammer headlights and a front fascia resembling a seatbelt design, giving the new Volvo S60 a distinctive look. Interior of the Volvo S60: It retains the 'Nordic minimalist style' design, with a full LCD instrument panel and a vertical built-in central control screen that adds more luxury and technological appeal. Additionally, the interior of the entire vehicle is predominantly black, creating a low-key yet luxurious feel when inside.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.