Which transmission is used in the Audi A4L?

The Difference Between ZF AMT and Sinotruk AMT?

Regarding the introduction of ZF AMT and Sinotruk AMT, the details are as follows: 1. The domestic production volume of 6-speed AMT transmissions is larger. The 6-speed AMT transmission targets the medium and light truck sectors, with models like Fast Gear C6JZ456 being among the top performers. The ZF ASTronic Lite 6-speed AMT transmission is primarily matched for domestic urban distribution logistics light trucks. 2. There are many domestic brands for 12-speed AMT transmissions, with ZF having significant sales. The 12-speed AMT transmission is currently the most mainstream heavy-duty truck AMT transmission. Domestically, Sinotruk's HW197 and HW257 12-speed AMT transmissions are mainly matched on HOWO heavy trucks. The maximum input torque of ZF's 12-speed TraXon AMT transmission can reach up to 3420N•m and is matched on many models of other domestic truck manufacturers.

15

0

Share

How to Start a Buick with Key Ignition Using One-Button Start?

First, get into the car without pressing the foot brake. Insert the key and turn it to the ON position, allowing the car's computer system to begin self-checking for at least 6 seconds or more. Press the foot brake, then press the start/stop button to ignite. Release the foot brake and determine the timing based on the model and temperature differences. Avoid sudden acceleration and braking in low temperatures. If starting on a slope, to prevent rolling backward, first shift the gear to D, lightly tap the accelerator, and gradually release the handbrake for a smooth start. Slowly release the foot brake to start the car, then smoothly press the accelerator according to road conditions for a safe drive.

11

4

Share

How to Remove the Central Control Screen of BYD Song?

Simply follow the detailed instructions in the manual to remove the air vent in front of the dashboard. After removing the air vent, you can see the fixing screws of the original car's main unit. Use a wrench to remove the two fixing screws on the main unit, then you can pull out the main unit. Remove the original car's DVD navigation main unit. Insert the provided fiber optic plug into the empty socket of the original car's main unit. Push the fiber optic plug into the original car's socket and secure it. Connect the fiber optic cable to complete the process. Reconnect all the wires, mostly the original ones, back to their original positions to restore the original state.

15

2

Share

How many cylinders does the BJ40 engine have?

The BJ40 is equipped with a four-cylinder engine. This model utilizes two types of engines: a 2.0-liter turbocharged diesel engine and a 2.3-liter turbocharged gasoline engine. The 2.0-liter turbocharged diesel engine delivers a maximum power of 150 horsepower and a peak torque of 350 Nm, while the 2.3-liter turbocharged gasoline engine produces a maximum power of 170 kW and a peak torque of 345 Nm. The BJ40 is positioned as a rugged SUV, with body dimensions measuring 4350mm in length, 1843mm in width, and 1837mm in height, and a wheelbase of 2450mm. It features a part-time four-wheel-drive system, employs a solid axle suspension, and adopts a body-on-frame design.

19

1

Share

How to Disassemble and Assemble a Single-Cylinder Diesel Engine Oil Pump?

First, gather all the necessary tools for disassembly, then engage the parking brake and turn off the ignition switch. Remove the rear seat cushion. Clean the interior of the vehicle, and carefully remove the rear inspection hole cover using tools, taking care to proceed slowly as there are wires connected underneath. Disconnect the electrical plug from the negative terminal, remember the original installation position, then wrap the oil pipe with plastic film to maintain cleanliness. Use a screwdriver to first remove the retaining claws, then detach the No. 1 oil pipe, disconnect the filter hose, take out the fuel pump, disconnect the wires, and finally remove the fuel pump.

7

0

Share

How to Identify the One-Third Point of the Hood?

Divide the front of the car into three equal parts. When parking alongside the curb, if the one-third point on the right side of the car's front aligns with the edge line, the right wheels will be approximately 30cm away from the curb. When the right-side reinforcement rib of the car's front aligns with the edge line while moving forward, the distance is exactly 30cm. Use the position of the wiper rivet. Align the left wiper rivet with the right edge line of the road, and the right side of the car will also be about 30cm away from the edge line. Observe the right rearview mirror. When the door handle just touches the road edge line, the distance between the car body and the edge line is 30cm.

1

Share

Which transmission is used in the Audi A4L?

The Difference Between ZF AMT and Sinotruk AMT?

How to Start a Buick with Key Ignition Using One-Button Start?

How to Remove the Central Control Screen of BYD Song?

How many cylinders does the BJ40 engine have?

How to Disassemble and Assemble a Single-Cylinder Diesel Engine Oil Pump?

How to Identify the One-Third Point of the Hood?

Is it acceptable if the side mirror crosses the line during parallel parking?

Is the Trumpchi Yingbao a Joint Venture Car?

How many photos are required for a wrong-way driving violation?

How to eliminate the Mercedes-Benz tire warning?