Which Toyota model is 'toyota'?

2 Answers
DeArabella
09/03/25 3:37am
toyota is Toyota, it's not a specific car model but the English logo of the Toyota brand. Toyota has many SUV models in its lineup, and several of them are produced domestically. The domestically produced SUV models under Toyota include the CHR, Highlander, Prado, RAV4, and Izoa. Below is additional information: Exterior dimensions: The CHR is a compact SUV under Toyota, with length, width, and height measuring 4390mm, 1795mm, and 1565mm respectively, and a wheelbase of 2640mm. Powertrain: The CHR comes in both hybrid and gasoline-only versions, both equipped with a 2.0-liter naturally aspirated engine. The gasoline version's 2.0-liter naturally aspirated engine delivers 171 horsepower and a maximum torque of 203 Nm, reaching peak power at 6600 rpm and maximum torque between 4400 to 4800 rpm. This engine features hybrid injection technology and uses an aluminum alloy cylinder head and block.
Was this review help?
10
2
Share
Luca
09/15/25 5:20am
Toyota isn't actually a specific car model at all—it's a globally renowned automotive brand. Many people hearing the name for the first time might assume it refers to a particular vehicle, but in reality, the Toyota company manufactures numerous models like the Corolla, Camry, and RAV4. I usually drive a Toyota Corolla and find it incredibly fuel-efficient and reliable; my neighbor bought a RAV4 and says it's exceptionally convenient for traveling. The brand originated in Japan, founded by Kiichiro Toyoda, who developed it into an industry giant. Today, its product lineup spans from sedans and SUVs to hybrid vehicles. It's important not to mistake it for a specific model, or you might get confused when car shopping. Toyota's quality is rock-solid with low maintenance costs—no wonder it's selling like hotcakes worldwide.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

What does SOC in cars mean?

Automotive SOC refers to the State of Charge of a car battery, also known as remaining capacity, which indicates the battery's ability to continue functioning. The functions of the battery are: 1. Providing strong starting current to the starter when starting the engine; 2. Assisting the generator in powering electrical equipment when the generator is overloaded; 3. Powering electrical equipment when the engine is idling; 4. Protecting the vehicle's electrical appliances. Car batteries are an essential part of automobiles and can be divided into traditional lead-acid batteries and maintenance-free batteries. Since the battery uses lead-calcium alloy for the grid frame, the amount of water decomposition during charging is reduced, and water evaporation is also lower.
10
1
Share

How Many Liters of Engine Oil Does the Classic Sylphy Need?

For the Classic Sylphy, the 1.6L engine generally requires about 3L of oil, while the 1.8L engine typically needs 4L. The original manufacturer-recommended oil for the Sylphy is 5W30. According to official maintenance recommendations, 5W30 oil of SL grade or higher should be used. The viscosity of engine oil changes with temperature, so it's important to pay special attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The latter number represents the oil's kinematic viscosity at 100°C. A higher value means the oil can maintain its viscosity index better under high temperatures, which can also be understood as providing better lubrication performance under high-temperature conditions. The method for changing the oil in a Classic Sylphy is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for about 30 seconds to allow the oil in the main oil passages to drain out. Use a specialized wrench to remove the oil filter. Apply oil to the oil seal of the new oil filter and tighten it clockwise by hand. Add the new oil through the oil filler cap on the engine's valve cover—typically, fill about three-quarters of a standard oil container. Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made. After stopping the engine, pull out the dipstick to ensure the oil level is within the standard range.
8
5
Share

How to Disassemble a Car Key?

To disassemble a car key, follow these steps: 1. Flip the latch and slide the front cover upwards; 2. The mechanical key is hidden inside the front cover; 3. Push the rear cover lock in the direction of the arrow; 4. Similarly, slide the rear cover upwards to open it; 5. Use the mechanical key to rotate the battery cover for disassembly. A car key is the tool used to operate a vehicle, and modern car keys all utilize a chip system, which is a magnetic chip system. The ignition lock cylinder's reading coil will read the chip in the key, as each chip contains specific digital information. A remote key allows for locking and unlocking the car from a distance without inserting the key into the lock. Its main feature is the convenience of locking and unlocking from afar, regardless of whether it's day or night, without the need to locate the keyhole.
6
4
Share

What is the fuel consumption of the Mazda 3?

The fuel consumption of the Mazda 3 ranges from 5.2L to 6.2L. The Mazda 3 is a compact 4-door, 5-seater sedan with dimensions of 4515mm in length, 1745mm in width, and 1465mm in height, and a wheelbase of 2640mm. This model is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 79 kW and a maximum torque of 146 Nm, with front-wheel drive configuration. The Mazda 3 features a MacPherson strut independent front suspension and a multi-link independent rear suspension, with a fuel tank capacity of 50 liters and a top speed of 187 km/h.
20
2
Share

Why does the tire pressure warning light come on?

Tire pressure warning indicates that the air pressure in the four tires is outside the normal range, usually caused by slow air leakage, punctures (like a nail), insufficient inflation, or excessive tire pressure. Tire pressure refers to the air pressure inside the tire, and its level plays a crucial role in the vehicle's performance and power. Tires are typically mounted on metal rims, supporting the vehicle body, absorbing external shocks, maintaining contact with the road surface, and ensuring driving performance. Tires operate under complex and demanding conditions, enduring various deformations, loads, forces, and temperature extremes during use. Therefore, they must possess high load-bearing capacity, traction performance, and shock absorption capabilities.
15
4
Share

How to Adjust the Seat Height of Baojun 510?

Baojun 510 seat height adjustment method is: simply press the button located below the left side of the driver's seat to adjust the seat height up and down. The Baojun 510 is a compact 5-door, 5-seat SUV with dimensions of 4220mm in length, 1740mm in width, and 1615mm in height, and a wheelbase of 2550mm. This vehicle is equipped with a 1.5L naturally aspirated engine and a 6-speed manual transmission, delivering a maximum power of 73 kW and a maximum torque of 135 Nm. It features front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.