Which tire model is equipped on the 2019 Sylphy?

2 Answers
DelGavin
07/25/25 7:48am
The 2019 Sylphy is equipped with Bridgestone Turanza tires, available in three specifications: 195/60R16, 205/50R17, and 185/65R15. Tires are one of the most crucial components of a vehicle, primarily responsible for supporting the entire weight of the car, bearing the vehicle's load, and transmitting forces and torques in the direction commanded by the driver. The Sylphy is a sedan series launched by Dongfeng Nissan Passenger Vehicle Company. The vehicle measures 4641mm in length, 1815mm in width, and 1447mm in height, with a wheelbase of 2712mm. It features front-engine, front-wheel-drive layout, a fuel tank capacity of 47L, standard seating for five, and comes with either a CVT intelligent continuously variable transmission or a 5-speed manual transmission.
Was this review help?
7
5
Share
RyleeFitz
08/10/25 6:41pm
The original tires for the 2019 Sylphy are typically Bridgestone Ecopia EP150, with specifications 195/60 R16, a size suitable for family sedans, primarily designed for fuel efficiency and low rolling resistance. I've driven this car for over three years, and the original tires perform smoothly in city driving, even in rainy conditions. Later, I switched to Michelin Energy Saver tires, which are quieter but more expensive. Tire pressure is crucial—it's recommended to check it monthly and maintain it between 2.3-2.5 bar, as improper pressure can lead to premature wear and reduced lifespan. On highways, insufficient tread depth can cause skidding, so safety comes first. The tire choice for the Sylphy depends on the trim level—lower trims may have smaller sizes, but sticking to the same specifications when replacing them ensures no issues. Driving habits also play a key role; avoiding sudden braking and acceleration can extend tire life. In summary, the original tires are good, but regular maintenance is essential.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

How many liters of engine oil are needed for the maintenance of Audi Q3 1.4T?

Audi Q3 1.4T requires 5 liters of engine oil during maintenance. Engine oil, also known as engine lubricant, is regarded as the "blood" of a car. It serves functions such as lubrication, cleaning, cooling, sealing, wear reduction, rust prevention, and corrosion protection for the engine. Only qualified lubricants can reduce wear on engine components and extend their service life. Here is an introduction to car maintenance: 1. Definition of car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of a car, also known as car servicing. 2. Scope of car maintenance: Modern car maintenance mainly includes the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose of car maintenance: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate potential hazards to prevent failures, slow down the deterioration process, and extend the service life.
16
5
Share

What is the torque specification for the crankshaft bearing cap bolts on the Grand Cherokee V8?

The torque specifications for the crankshaft bearing cap bolts on the Grand Cherokee V8 are 8 Nm for the main bearing caps and 6 Nm for the connecting rod bearing caps. Below are the functions of the bearing caps and precautions for replacing their bolts: Functions of engine bearing caps: Bearing caps (also known as bearing shells) play a role in cooling the bearings and ensuring liquid lubrication in the engine. When the sliding bearings are in operation, a thin oil film is required between the bearing shells and the rotating shaft for lubrication. Excessive clearance in the connecting rod bearings can lead to low oil pressure, and in severe cases, knocking sounds. If too loose, it may cause the connecting rod to move outward, damaging the connecting rod and resulting in piston wear. If the clearance is too small, it can accelerate wear on the bearings and, in severe cases, cause the crankshaft to seize. Precautions for replacing bearing cap bolts: When replacing bearing cap bolts, always use a torque wrench and tighten the bolts strictly according to the specified torque.
20
0
Share

What is the weight of the Envision?

The weight of the Buick Envision varies depending on the configuration. It can be categorized as follows: 20T two-wheel drive technology, leading, and elite versions at 1575KG; 20T two-wheel drive luxury version at 1610KG; 20T four-wheel drive luxury version at 1685KG; 28T four-wheel drive leading and elite versions at 1755KG; 28T four-wheel drive luxury, flagship, and sport flagship versions at 1800KG. Here is some information about the Buick Envision: 1. Introduction: The Chinese name for the Buick ENVISION is "Angkewei" (Envision). As a new-generation strategic model of General Motors, the Buick Envision's exterior design inherits the essence of the ENVISION Vision concept car. 2. Models: The current models are available with 1.5T and 2.0T engine options, each with both two-wheel drive and four-wheel drive variants. The 1.5T is paired with a 7-speed dual-clutch transmission, while the 2.0T is paired with a 6-speed automatic transmission.
12
5
Share

Why does the new Bora only have one reversing light on?

The new Bora is designed this way, with the symmetrical opposite side being a high-intensity fog light. There is a white lens on the right rear, which is the reversing light. The same position on the left side is not white but red, serving as the rear fog light. Below is some relevant information about the new Bora: 1. Body dimensions: The Volkswagen Bora's body dimensions are 4663mm in length, 1815mm in width, and 1462mm in height, with a wheelbase of 2688mm. 2. Engine: The Bora is equipped with a 1.2T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 85 kW and a maximum torque of 200 Nm. It features a MacPherson strut front suspension and a torsion beam rear suspension. 3. Exterior design: The Bora's front face design incorporates Volkswagen's design language, integrating continuous lines into the front face. Precise and bold lines connect the headlights with the chrome-plated grille. The contour lines of the headlights and their internal design elements are meticulously matched, complementing the chrome grille to form Volkswagen's iconic front face.
17
1
Share

What Type of Engine Oil is Best for Winter?

Due to low temperatures in winter, when selecting engine oil, it's advisable to choose 10W-40, 5W-40, or 0W-40 based on the environmental temperature conditions. Precautions for Using Engine Oil in Winter: 1. Avoid Changing Engine Oil When the Car is Cold: During winter, try to avoid changing the engine oil when the car is cold. In cold conditions, the oil is significantly affected by temperature, leading to reduced fluidity. This may result in incomplete drainage of the old oil during the change. 2. Regularly Clean the Oil Pan: The oil pan of a car engine is a crucial area that should not be overlooked while driving. During engine operation, metal particles from internal wear can flow with the oil into the oil pan, potentially clogging the filter and oil holes, which may lead to increased fuel consumption. 3. Add Engine Oil in the Right Amount: When adding engine oil, ensure the quantity is appropriate—do not overfill. The purpose of adding oil is to enhance engine lubrication. Excessive oil can increase friction among engine components, affecting normal operational efficiency. In severe cases, it may cause oil burning, blue smoke from the exhaust, and increased internal carbon deposits. Always follow the markings on the engine oil dipstick when adding oil.
6
3
Share

What is the difference between butterfly doors and scissor doors?

The main difference between butterfly doors and scissor doors lies in the hinges. The overall structure of butterfly doors is similar to scissor doors, but their door hinges are positioned higher, usually located at the A-pillar or near the front edge of the roof close to the A-pillar. Introduction to butterfly doors: Butterfly doors, also known as dihedral doors, are a type of door style found in supercars. The hinges of butterfly doors are installed on the A-pillar or the fender near the A-pillar. The doors open forward and upward via the hinges, and the angled doors resemble the wings of a butterfly, hence the name butterfly doors. This unique door style has become a distinctive feature of supercars. Currently, famous supercars featuring butterfly doors include the Ferrari Enzo, McLaren F1, MP4-12C, Porsche 911 GT1, Mercedes-Benz SLR McLaren, Saleen S7, and Devon GTC. Introduction to scissor doors: Scissor doors, named for their opening motion resembling scissors, have their hinges located on the front fender. This door style was first introduced on the concept car Carabo in 1968. However, it wasn't until Lamborghini adopted scissor doors that they gained worldwide popularity, leading many to consider Lamborghini as the originator of scissor doors.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.