Which Symbol Represents the Front Windshield Defogger?

1 Answers
GrantFitz
07/30/25 5:14am
Introduction to the Front Windshield Defogger Symbol: The front windshield defogger symbol is represented by three upward-curving arrows enclosed within a square frame. The defogger button is typically located at the bottom left corner of the air conditioning control panel. When the windshield fogs up, simply press the defogger button to activate the air conditioning for defogging. Below is an explanation of how car defogging works: 1. Physical Principle of Cold Air Defogging: The liquid refrigerant absorbs heat from the cooled object in the evaporator, vaporizing into low-temperature, low-pressure steam, which is then drawn into the compressor, compressed into high-temperature, high-pressure steam, and discharged into the condenser. 2. Physical Principle of Hot Air Defogging: When gas containing mist flows through the defogger at a certain speed, due to the inertia of the gas, the large droplets formed by the collision of mist with the wave plates separate from the surface of the wave plates as the gravity of the droplets exceeds the combined forces of gas lift and liquid surface tension.
Was this review help?
15
4
Share
More Forum Discussions

Why is it difficult to shift from P to R gear?

Difficulty in shifting from P to R gear is mainly caused by incorrect parking methods. Here are the details: When you last parked and turned off the engine, because the engine was still running, shifting from D or R gear to P gear requires passing through R gear, which causes the gears to get stuck. As a result, it becomes difficult to shift out of P gear the next time. Here are the solutions to the difficulty in shifting from P to R gear: (1) Stop the car by pressing the brake, keep the brake pressed, shift from D to N gear, then engage the handbrake with your left foot, release the foot brake with your right foot, shift from D to P gear, turn off the engine, and exit the car. (2) When driving, press the foot brake, start the engine, and shift gears to solve the problem.
13
5
Share

Does the brake fluid of a sedan need to be replaced?

Car brake fluid needs to be replaced. The following are the effects of not replacing the brake fluid: 1. Not replacing the brake fluid increases the probability of brake problems, and brake problems are serious issues. Additionally, brake fluid has a property of easily absorbing water. It can absorb water vapor from the air. When the brake fluid contains too much water and the brakes are used frequently, high temperatures will be generated. The high temperature is transferred from the brake caliper to the piston and then to the brake fluid. The boiling point of water is low, so it turns into water vapor. Water vapor is compressible, which can lead to a decrease in braking force. 2. If the brake fluid is not replaced in time, the deterioration or contamination of the brake fluid can also cause a decrease in braking force. Additionally, it can increase the wear of the brake master cylinder and wheel cylinder pistons, shortening their lifespan.
14
1
Share

Do New Cars Need a Break-in Period?

New cars require a break-in period, as the condition during this phase directly affects the vehicle's lifespan. The precautions for the break-in period of a new car are as follows: 1. Warm up the car before starting. 2. There are speed limits during the break-in period: generally 40 to 70 km/h for domestic cars and within 100 km/h for imported cars. 3. Maintain engine speed between 2000 and 2500 rpm while driving. Shift gears promptly and appropriately to avoid driving at high gears with low rpm or low gears with high rpm. Also, avoid using a single gear for extended periods. 4. The load during the break-in period should not exceed 75% of the rated capacity. The actual load should be less than the specified weight or number of passengers, and overloading must be avoided. 5. Avoid sudden braking during the break-in period, as emergency braking can affect the braking system and place excessive load on the engine.
20
1
Share

Why Avoid 0 as the Last Digit of License Plates?

There are several reasons why people avoid having 0 as the last digit of license plates: 1. Symbolism: Some choose not to have 0 as the tail number due to perceived negative connotations. For car owners, purchasing a vehicle is a significant event, and selecting a license plate is an important part of the process. Many regions emphasize avoiding unlucky tail numbers, fearing they may bring misfortune, hence people prefer auspicious numbers. 2. Mixed Interpretations: "0" is a highly controversial digit. While its rounded shape may symbolize completeness or perfection, others interpret it as "utter emptiness," "achieving nothing," or "empty love and career prospects." Different regions hold varying beliefs about 0. 3. Traffic Restrictions: Another drawback in cities with driving restrictions is that vehicles with license plates ending in "0" are typically banned on Fridays, which is often a busy day for outings.
12
4
Share

What are the consequences of not scrapping a motorcycle when it expires?

The consequence of not scrapping and deregistering a motorcycle after its expiration is that the un-scrapped and un-deregistered motorcycle will remain under the owner's name, which may affect future car purchases and driver's license services. According to regulations, the scrapping period for motorcycles is 13 years. Local authorities can set stricter scrapping periods, but it should not be less than 11 years, so the scrapping period ranges from 11 to 13 years. A motorcycle can be kept after scrapping, but it cannot be driven on the road. Motorcycle scrapping process: First, bring your ID card, vehicle registration certificate, driving license, and license plate number to the vehicle management office to fill out a scrapping application form. After approval by the vehicle management office, a scrapping notice will be issued. Take the notice to a recycling company. After the recycling company completes the process, they will issue a recycling certificate. Finally, bring the recycling certificate back to the vehicle management office for registration.
4
0
Share

What to Do When There is Water Accumulation in the Tiida Car?

Water accumulation inside the car should be promptly sent to a repair shop for maintenance. The car engine will not have major issues as long as the accumulated water inside the engine is cleared. Below is an introduction about the Tiida: 1. Meaning: The Tiida is a car produced by Dongfeng Nissan Passenger Vehicle Company. The name Tiida embodies the meaning of a swift horse (Qiji), further interpreted as a swift horse traveling thousands of miles, galloping swiftly and reaching destinations rapidly. 2. Advantages: Youthful and fashionable exterior; good performance in terms of space; decent power; good shock absorption effect; good fuel economy. 3. Exterior: Compared to the older model, the Nissan Tiida's exterior design incorporates more curved lines, making the new Tiida appear rounder and more stylish; the triangular headlights and front grille give the Tiida a somewhat fierce front face.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.