Which symbol on the car is the heater switch?

1 Answers
OCharles
07/30/25 12:43am
The AC button in the car is the switch for the air conditioning compressor, with ACNO indicating on and ACOFF indicating off. Here is some related knowledge about using car air conditioning: 1. Open windows before turning on the AC: After a car has been exposed to the sun in summer, do not enter immediately or rush to turn on the AC. Instead, first lower all windows or open the doors, then turn on the fan to accelerate air circulation. Close the windows and turn on the AC after a few minutes. 2. Direct the AC vents upward: Choose to direct the airflow upward, utilizing the principle that hot air rises and cold air sinks, allowing the cold air to cool the car from top to bottom. 3. Switch between internal and external circulation: For long drives, make full use of the internal and external circulation functions of the AC. These functions control the air quality inside the car and assist in maintaining temperature.
Was this review help?
14
4
Share
More Forum Discussions

Where is the towing hook located on the Skoda Rapid?

Skoda Rapid's rear towing hook is originally designed in the middle position under the rear bumper, which can be seen by bending down. Method to locate the towing hook: Find the towing hook cover at the rear of the vehicle. After locating the towing hook socket, the owner can use a key, screwdriver, or similar tool to pry open the plastic cover, taking care not to scratch the car paint. Once the plastic cover is removed, locate a metal rod with a ring on one end and a screw on the other in the vehicle's trunk. This item is usually placed with the spare tire and serves the purpose of towing. After prying it open, the towing hook will be visible, and it can then be attached. Towing hook locations for other models: For the Skoda Kamiq, the rear towing hook is generally located under a small cover on the rear bumper. Use a screwdriver to pry it open, and the towing hook installation position will be inside.
3
4
Share

Should I replace the car battery at a 4S shop or elsewhere?

Both options are acceptable, but 4S shops are more expensive, so it's recommended to replace it at a repair shop. Here is a detailed introduction about car batteries: 1. Overview: The battery is an essential part of a car, which can be divided into traditional lead-acid batteries and maintenance-free batteries. 2. Structure: The structure of a car lead-acid battery mainly consists of positive (negative) plates, separators, electrolyte, case, connecting strips, and terminals. 3. Advantages: Compared with traditional batteries, modern batteries have advantages such as not requiring any liquid addition, easy terminal connection, and long power storage time. Since the battery uses a lead-calcium alloy grid frame, it produces less water decomposition during charging, has lower water evaporation, and releases minimal sulfuric acid gas due to its sealed case design.
6
4
Share

Why Can Three Test Slots Be Booked for Subject One?

The driving test is divided into sessions based on the slots booked by candidates, such as the first session, second session, third session, etc. The system provides two modes for booking test dates and slots: self-selection of test slots and system-arranged tests. Below are the specific explanations: 1. Self-selection of test slots: The system will display all available test slots within the selected booking period, allowing users to choose one or multiple slots for booking. 2. System-arranged tests: If users opt for system-arranged tests, the system will automatically match eligible test slots within the selected booking period, with no fixed test time or slot. 3. Limited cancellation attempts: Each subject has a limited number of cancellation attempts, which do not count toward the total test attempts. Frequent cancellations may reduce priority for future bookings. Cancellations must be requested at least one day in advance. Cancellations or absences on the test day will be treated as a fail.
19
2
Share

How to Stop at a Red Light with a Manual Transmission?

When stopping at a red light with a manual transmission, pay attention to the following: 1. Gear Shift: After stopping, shift into neutral and engage the handbrake to ensure the car does not move. 2. Brake Early: If your car is the first at the crosswalk, try to brake as early as possible to avoid stopping too close to the intersection, preventing potential scrapes with electric vehicles crossing the intersection, as such incidents are quite common. 3. Maintain Distance: Keep an appropriate distance from the car in front and check the side mirrors to prevent rear-end collisions. 4. Lane Selection: Before stopping at the red light, choose the correct lane (straight, left-turn, or right-turn) to avoid traffic violations.
19
2
Share

What is the real reputation of Mistra owners?

Hyundai Mistra, this is a mid-size sedan with a fashionable and elegant appearance, spacious interior, equipped with 1.8L and 1.6T engines that deliver strong power. It comes with abundant configurations, reliable overall performance, and enjoys significant market discounts, making it quite popular. Below is relevant information: 1. Advantages: The fuel consumption is very economical, having long passed the break-in period, and the handling is quite satisfactory. Compared to when it was first purchased, the fuel efficiency has improved significantly, saving a lot of money. 2. Disadvantages: The chassis tuning is not very satisfactory. Those who have driven the Mistra can probably feel that the shock absorption is indeed a bit stiff. Every time on bumpy roads, occasionally scraping the chassis will result in a noticeable sound. Additionally, it lacks one-touch window control, including for the driver's seat, which can sometimes be inconvenient.
11
5
Share

What are the symptoms of water entering a car's transmission?

There are several scenarios when water enters a car's transmission: 1. Mild water ingress: Some screws inside the transmission may rust. 2. Moderate water ingress: White sediment appears in the oil pan. When oil mixes with water, it forms a white emulsion that adheres to the oil pan. The presence of such sediment indicates moderate water ingress. 3. Severe water ingress: This can be determined by the color and viscosity of the transmission fluid. Water entering an automatic transmission can corrode steel screws inside, necessitating prompt inspection and repair. Additional information: 1. If friction plates absorb water and cannot be repaired: When water enters the transmission and is absorbed by friction plates, these sealing components must be replaced, increasing automatic transmission repair costs. 2. Timely repair is crucial for water ingress: Early detection and repair minimize costs. Delaying repairs after water ingress can lead to various issues like automatic transmission oil leaks, abnormal noises, or erratic vehicle movement during operation.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.