Which switch is the front window defogger in Mercedes-Benz?

2 Answers
DeJuliet
07/28/25 9:04pm
The defogging function in Mercedes-Benz is the same as the front windshield defrosting function. On the air conditioning control panel below the CD player, there is a fan-shaped symbol with three curved upward arrows, which is the defogger switch. The one to the right of the fan is the front defroster. Simply turn on the A/C to defog. Since the temperature inside the car is higher than the outside temperature, fog forms. More details are as follows: 1. Convection Defogging: If the fog inside the car is not heavy, you can open a small gap in the side windows to allow air to flow between the inside and outside of the car, reducing the temperature difference and gradually dissipating the fog. The principle of this method is the same as turning on the cold air from the air conditioning, but it does not increase fuel consumption. The downside of window convection is obvious—it cannot be used during rain, snow, on highways, or when the fog is heavy. Additionally, opening the windows lowers the temperature inside the car. 2. Causes of Fogging: Fog forms on the inner surface of the glass when the temperature outside the car is lower than the temperature inside. Consequently, the temperature of the front windshield is lower than the interior temperature, causing water vapor inside the car to condense into tiny droplets on the glass, resulting in a foggy window. This usually happens on rainy days or in winter. For manual air conditioning models, you can select the front window defogging mode, set the fan speed to maximum, turn on the A/C, and adjust the temperature to the lowest setting. The fog on the glass will disappear shortly.
Was this review help?
9
5
Share
StCooper
08/12/25 1:45am
Once when I was driving a Mercedes-Benz E-Class, it was pouring rain outside and the windows fogged up completely white, making it impossible to see the road. I quickly glanced at the center console, found the fan-shaped button on the climate control panel, and pressed it. The fan immediately directed airflow onto the windshield. In less than half a minute, the fog cleared—it was incredibly effective. This button is usually located slightly to the left of the center on the dashboard, often colored blue or marked with a small windshield icon. Mercedes-Benz owners, remember this button! Try locating it by touch before driving so you won’t fumble in an emergency. In case you encounter rainy driving conditions, this feature could be a lifesaver.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

What is the time period for free expressway travel during Mid-Autumn Festival?

The free expressway travel period during Mid-Autumn Festival starts at 00:00 on the first day of the holiday and ends at 24:00 on the last day of the holiday. Below is extended information regarding free expressway travel during Mid-Autumn Festival: 1. Free period: From 00:00 on the first day of the holiday to 24:00 on the last day of the holiday. For ordinary highways, the free period is based on the time when the vehicle passes through the toll booth lane, while for expressways, it is based on the time when the vehicle exits the toll booth lane. 2. Eligible vehicles: The free expressway travel applies to passenger vehicles with 7 seats or fewer (including 7 seats) that travel on toll roads, including motorcycles allowed on ordinary toll roads. 3. Free scope: The scope of toll roads eligible for free travel on airport expressways across various regions must comply with the "Highway Law of the People's Republic of China" and the "Regulations on the Administration of Toll Roads," covering legally approved toll roads (including toll bridges and tunnels).
9
3
Share

Can Private Cars Carry Medical Oxygen?

According to regulations, private cars are not allowed to carry oxygen cylinders of any type. Traffic laws stipulate that regardless of the purpose, oxygen cylinders are not permitted in vehicles. If traffic police find them during inspections, fines may be imposed. It is best not to carry them. If there is a genuine urgent need, it is advisable to obtain a certificate from a formal hospital to explain to the traffic police when necessary. Otherwise, this would be considered as carrying hazardous materials. Below is additional information: 1. Introduction to Medical Oxygen Cylinders: Medical oxygen refers to oxygen with a concentration reaching 99.5%, meeting quality requirements. 2. Principle: By opening the oxygen supply switch, the high-pressure oxygen in the cylinder passes through a pressure reducing valve and is finely adjusted via a flow control switch to output the required flow rate. Connecting the oxygen tube, humidifier, oxygen tube, and nasal cannula allows for oxygen delivery.
6
5
Share

What is the function of the oil ring?

The function of the oil ring is to scrape off excess oil from the cylinder wall and spread a uniform oil film on the cylinder wall. This prevents oil from entering the combustion chamber and reduces wear between the piston, piston rings, and cylinder wall. The oil ring is a type of piston ring, divided into two types: conventional oil rings and composite oil rings. The conventional oil ring is typically made of alloy cast iron, with a groove in the middle of its outer surface and many small oil drainage holes or slits at the bottom of the groove. The composite ring consists of upper and lower scraper rings and an expander that provides radial and axial tension. The scraper rings of this type are very thin, exert high specific pressure on the cylinder wall, and have strong oil-scraping capabilities. The upper and lower scraper rings operate independently, offering good adaptability to the cylinder, with low mass and large oil return passages.
19
3
Share

What Causes the Buzzing Sound When Charging a New Energy Vehicle?

New energy vehicles may produce a buzzing sound during charging due to the following reasons: Dust accumulation in the charging system: Over time, dust can accumulate in the charging system, leading to louder noises. During charging, new energy vehicles generate static electricity, which attracts dust from the environment onto the charging system. This can impair heat dissipation, causing the temperature to spike immediately when the charging gun is plugged in, and the fan to operate at maximum speed continuously. Heat from current and voltage conversion components: The buzzing sound can also be caused by heat generated from components converting current and voltage, which triggers the cooling fan in the electronic control system. This is a normal phenomenon. If the ambient temperature is low and heat dissipation is efficient, the fan may not start or operate at a low speed. However, if the temperature exceeds 40 degrees, the fan will start running, and if it surpasses 50 degrees, the fan will operate at high speed, producing a noticeable buzzing sound that the owner can hear.
6
5
Share

Does a car need a break-in period?

Yes, a car needs a break-in period, which typically ranges from 1,000 to 3,000 kilometers. This ensures that the mechanical components fully contact, friction, adapt, and settle. Break-in requirements: 1. Maintain smooth starts, avoid sudden acceleration, and do not let the engine RPM exceed 3,000; 2. Before starting, ensure the coolant temperature reaches at least 50°C, start in a low gear, and shift to a higher gear after 1 kilometer. Keep the coolant temperature between 80°C and 90°C while driving; 3. Shift gears promptly during driving, avoid prolonged use of a single gear, and do not drive at low speeds in high gears or at high speeds in low gears; 4. Avoid overloading the vehicle, especially during the break-in period—the lighter the load, the better. Heavy loads can damage the car; 5. Choose good road conditions to avoid excessive vibrations, impacts, or emergency braking. Use high-quality fuel and engine oil, and avoid using engine wear-resistant additives; 6. Avoid driving for excessively long periods.
10
2
Share

What are the differences between the G63 and G500?

The G63 and G500 are both classic off-road vehicles from Mercedes-Benz. The main differences between the G63 and G500 are as follows: 1. Exterior: The G63, equipped with AMG components, features a wider front face. Its vertical waterfall-style grille represents the latest design language of the family and is the most distinct feature differentiating it from other Mercedes-Benz models, giving it a more luxurious and visually impactful appearance. The G63 also comes with larger 22-inch AMG alloy wheels compared to the G500, further enhancing its rugged look. Don't underestimate these wheels—for cars in this class, the wheels are quite expensive, and larger wheels demand higher-quality materials. 2. Engine: The G500 delivers 421 horsepower with a peak torque of 610 Nm, while the G63 produces 585 horsepower with a peak torque of 850 Nm. The Mercedes-Benz G63 AMG not only excels in performance but also perfectly balances power, comfort, and off-road capability.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.