Which switch controls the cold air conditioning in the Audi Q5?

How to Check the Total Mileage on the 10th Generation Accord?

The 10th generation Accord's dashboard features a speedometer on the right and a tachometer on the left. The number before "km" displayed between the speedometer and tachometer indicates the total mileage. Below are the relevant details: 1. The Accord's dashboard is equipped with a maintenance reminder light. When the odometer reaches 9600km-12000km and the ignition is turned on, the maintenance light will illuminate for 2 seconds. If the owner fails to perform maintenance after exceeding 12000km, the maintenance light will flash continuously to remind the owner to service the vehicle promptly. 2. After maintenance, the odometer needs to be reset to zero. Turn on the ignition and press the reset button on the dashboard until the trip meter displays "0". 3. The Accord's dashboard does not have a dedicated maintenance light, but the "MAINTENANCE REQUIRED" indicator on the dashboard serves as a reminder. When the mileage approaches 12000km, this indicator will change from green to yellow. If maintenance is not performed after exceeding 12000km, the indicator will turn from yellow to red.

2

Share

Is It Normal to Fail the Subject 2 Test Twice?

Failing the Subject 2 test twice is normal. Below is an introduction to Subject 2: Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. Subject 2 test items for small vehicles C1/C2: Include five mandatory test items—reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curves). Some regions also include a sixth item, high-speed card collection. Subject 2 test items for large vehicles A1/A2/A3/B1/B2: Include pile test, stopping and starting on a slope, parallel parking, passing a single-plank bridge, curve driving, right-angle turns, passing a width-limited gate, passing continuous obstacles, driving on bumpy roads, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.

20

1

Share

Can I cancel my appointment on the day of the Subject 2 test?

Subject 2 test appointments cannot be canceled on the same day; you must cancel at least one day in advance at the vehicle management office. Below is relevant information about Subject 2: Overview: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It refers to the field driving skills test. For small vehicles (C1/C2), the test includes five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as the S-curve). Some regions may also include a sixth item, such as taking a card on a highway. Teaching aids: Teaching software: Learners can use driver simulation test software on mobile or computer devices to study traffic regulations. Teaching materials: "Safe Driving Starts Here," compiled by the Ministry of Transport of the People's Republic of China. Driving schools may provide learning materials uniformly, or students can purchase them at their own expense.

1

4

Share

Is one bottle of tire repair liquid used at a time?

Tire repair liquid is used one bottle at a time. Below is relevant information about tire repair liquid: Function: The production process of automatic tire repair liquid is simple, easy to use, environmentally friendly, non-toxic, non-corrosive, and non-flammable. The product is affordable and widely accepted, featuring high adhesion and long-term storage capability. With automatic tire repair liquid, no additional tools are needed for tire repair, and inflation and repair can be completed within seconds. If a tire gets punctured while driving, simply inject the automatic tire repair liquid directly into the tire through the valve to achieve the miraculous effects of leak prevention, repair, and automatic inflation. Method: The method involves injecting an appropriate amount of tire repair liquid into the tire through the valve, inflating it to fill the hole, and then continuing to inflate until the rated pressure is reached. The excess tire repair liquid will serve as a preventive measure.

17

2

Share

What is the reason for the ETC tag being invalid?

ETC displaying "Tag Invalid" indicates that the ETC electronic tag is not activated. You need to take the ETC device to an ETC service center or ETC service point for inspection. If the invalidation is not caused by human factors, simply performing a secondary activation of the ETC will allow it to be used. ETC installation process: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; the red light will briefly turn on, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the glass surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. ETC activation method: Insert and remove the ETC card twice in succession until the electronic tag screen displays "Bluetooth On." If inserting and removing the card twice while the tag is not attached shows "Tag Invalid," this is normal and does not affect activation. Alternatively, you can press the button on the top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth and open the corresponding mobile app (usually, a download QR code is provided on the electronic tag). Enter the device activation interface. Click "Connect Device" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle's front to complete activation.

16

1

Share

What does NIO Fellow mean?

NIO Fellow is a partner in NIO's stores responsible for establishing user relationships, delivering brand value services, and assisting users in purchasing and using vehicles. Below is relevant information about NIO: Marketing Philosophy: User-centric, prioritizing user cultivation and acquisition over products, and influencing users' brand value before the product. NIO gathers users online and offline, retains them through the APP, and converts APP users into car buyers. NIO's marketing focuses on core users, leveraging word-of-mouth to expand surrounding circles, emphasizing bringing in new users through existing ones, with a high-quality lifestyle as the core brand value. This is why NIO advertisements are rarely seen. Company Profile: NIO is the most outstanding representative of China's new automakers, founded in November 2014. By April 2018, NIO had established R&D and production facilities in 12 locations worldwide, including Shanghai, Beijing, San Jose, Munich, and London. On September 12, 2018, NIO successfully IPO'd on the New York Stock Exchange.

2

0

Share

Which switch controls the cold air conditioning in the Audi Q5?

How to Check the Total Mileage on the 10th Generation Accord?

Is It Normal to Fail the Subject 2 Test Twice?

Can I cancel my appointment on the day of the Subject 2 test?

Is one bottle of tire repair liquid used at a time?

What is the reason for the ETC tag being invalid?

What does NIO Fellow mean?

What Causes Occasional Idle Shaking?

How to Solve Excessive Engine Noise?

What are the gear shifting requirements and passing standards for Subject 3 driving test?

What is the normal tire pressure for the Baojun 560?