Which subject should be retaken if 12 points are deducted for driving a vehicle beyond the permitted license type?

1 Answers
MaddoxMarie
07/30/25 12:19am
You need to retake Subject 1. After passing the Subject 1 test, the deducted points on your driver's license will be cleared. Below are some popular tips to avoid point deductions while driving: Familiarize yourself with traffic signs and routes: Before setting off, study your travel route carefully to avoid point deductions caused by unfamiliarity with the route or traffic signs. Additionally, understand the Road Traffic Safety Law while driving, use vehicle lights properly, as failure to use lights according to regulations may result in fines and point deductions. Control your speed: Avoid and be aware of special road sections with unique speed limit requirements. Do not develop the habit of speeding; drive courteously. Master vehicle handling skills, pay attention to your driving field of vision, and avoid distractions.
Was this review help?
5
2
Share
More Forum Discussions

Is the L Gear for Climbing Hills?

Yes, it is a hill-climbing gear. This gear can be used when driving at low speeds, where the transmission will remain in first gear without shifting up, making it suitable for use on slopes and also providing some braking function when going downhill. Some cars are equipped with a D2 gear, known as the low-speed forward gear, used for bad roads or off-road conditions. Additionally, there may be a snowflake button or an ODOFF button on the transmission. These are all auxiliary features designed to control the vehicle speed at low levels, facilitating driving under different road conditions. Extension: The L gear is also called the low-speed gear, typically used for climbing hills. If a car is driving in congested traffic or other slow-moving conditions, staying in D gear might cause frequent gear shifts, not only increasing fuel consumption but also reducing the vehicle's handling comfort.
17
0
Share

What is EPC in cars?

EPC in cars refers to the Electronic Power Control system of the engine, also known as the electronic throttle. After turning the ignition key, the vehicle begins self-checking, and the EPC indicator light will illuminate for a few seconds before turning off. If it remains on after the vehicle starts, it indicates a malfunction in the vehicle's mechanical or electronic systems, requiring timely inspection and repair. Common reasons for the EPC light to stay on include: 1. A dirty throttle body, which should be cleaned; 2. Non-functioning brake lights, necessitating inspection of the brake switch and wiring. In the EPC system, the traditional throttle cable is eliminated, replaced by a sensor in the pedal assembly. The engine control unit calculates the appropriate target throttle opening based on the position data fed back by the pedal sensor and sends a signal to the throttle actuator motor to rotate the throttle to the desired angle.
17
4
Share

Will the car break if shifting gears without pressing the clutch?

Shifting gears without pressing the clutch won't break the car, but it can damage the clutch disc. If the gear is not accurately engaged, it can harm the transmission. Not fully depressing the clutch means the gear is not completely disengaged, leading to wear on the transmission gears. For manual transmission vehicles, frequently shifting gears in this manner over time will reduce the lifespan of the transmission. The car's clutch is located within the flywheel housing between the engine and the transmission, secured to the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transferring the engine's power input to the transmission.
10
2
Share

What is the general weight of a car in tons?

A small car weighs 1.5 tons, generally household cars are between 1.2 tons and 1.3 tons, mid-to-high-end cars are around 1.4 tons to 1.6 tons, and heavier ones range between 1.8 tons and 2.0 tons. Excessive vehicle weight can lead to higher fuel consumption, poorer handling, slower acceleration, and increased braking distance. Methods to reduce car weight: 1. Materials: Use lighter materials such as aluminum alloy and carbon fiber. Nowadays, to reduce weight, cars mainly use aluminum alloy, with only some expensive sedans or sports cars extensively using carbon fiber. 2. Design: Optimize structural design to reduce the use of excess materials while ensuring structural rigidity, thereby saving weight and costs. 3. Usage: Avoid placing too many miscellaneous items in the trunk, as this not only occupies space and causes inconvenience when needing to store luggage but also adds extra weight to the car, increasing fuel consumption.
19
0
Share

What Causes the Front Wheels to Make a Rattling Noise on Rough Roads?

The reasons for the front wheels making a rattling noise on rough roads include: worn lower control arm bushings, excessive play in the lower control arm ball joint, excessive play in the stabilizer bar ball joint, severe wear of the stabilizer bar bushings, excessive play in the steering rack tie rod, excessive play in the outer tie rod end, and severe shock absorber leakage. Front-wheel drive refers to a car design where the engine only drives the front pair of wheels. Most modern passenger cars use a front-wheel-drive configuration, while rear-wheel drive was more common in the early stages of automotive development. In front-wheel-drive cars, the engine is usually mounted transversely, meaning the cylinders are arranged perpendicular to the direction of travel, although a few models feature longitudinally mounted engines.
9
0
Share

How to Remove the Front Passenger Storage Box of Baojun 730?

The method to remove the front passenger storage box of Baojun 730 is: 1. Remove the protective panel on the side of the center console on the front passenger side; 2. Remove the screws to take off the front passenger storage box. The Baojun 730 is a 5-door, 7-seater MPV with body dimensions of 4780mm in length, 1780mm in width, and 1740mm in height, with a wheelbase of 2750mm. It is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 108 kW and a maximum torque of 250 Nm. The drive system is front-wheel drive, with a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.