Which statement about the function of seat belts is incorrect?

1 Answers
AndresRose
07/29/25 11:49pm
The incorrect statements about the function of seat belts are protecting the neck from injury, reducing driver fatigue, and maintaining the correct driving posture. The functions of car seat belts: They are safety devices designed to restrain occupants during a collision, prevent secondary collisions between occupants and the steering wheel or dashboard, and avoid occupants being thrown out of the vehicle, which could lead to fatalities or injuries. Car seat belts are widely recognized as the most cost-effective and efficient safety device, and many countries mandate their installation in vehicles. Precautions for using car seat belts: Regularly inspect the condition of seat belts and replace them promptly if damaged. All bolts securing the seat belts to the floor near the seats should be tightened according to regulations, and sealant should be applied around the bolts. The three-point lap belt should be worn as low as possible, around the hips, not the waist.
Was this review help?
13
0
Share
More Forum Discussions

Can't Pull Out the Key When the Whole Car Loses Power?

Cannot pull out the key when the whole car loses power. Below is relevant information about car batteries: 1. Concept: A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Typically, what people refer to as a battery is a lead-acid battery. That is, a battery mainly made of lead and its oxides, with sulfuric acid solution as the electrolyte. 2. Working Principle: It uses a lead plate filled with sponge-like lead as the negative electrode, a lead plate filled with lead dioxide as the positive electrode, and 22~28% dilute sulfuric acid as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy. When the battery discharges, metallic lead is the negative electrode, undergoing an oxidation reaction and being oxidized to lead sulfate; lead dioxide is the positive electrode, undergoing a reduction reaction and being reduced to lead sulfate.
15
5
Share

Does Nissan's first maintenance not include an oil change?

Nissan's first maintenance does not include an oil change. Below is relevant information about engine oil: 1. Introduction: Engine oil, also known as engine lubricant, with a density of approximately 0.91×10³ (kg/m³), serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. It is often referred to as the 'blood' of a car. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricants, determining their fundamental properties, while additives compensate for and enhance the shortcomings of the base oil, imparting new characteristics, making them a crucial part of lubricants. 2. Classification: Engine oils on the market can be broadly categorized into mineral oils and synthetic oils based on their base oil (vegetable oils are not considered due to their scarcity). Synthetic oils are further divided into full synthetic and semi-synthetic.
14
1
Share

How many times does a 2007 car need to be inspected per year?

A 2007 car needs to be inspected once a year. Here is the relevant information: 1. Specific regulations: According to regulations, small and micro non-operational passenger vehicles must be inspected once every two years within the first six years, once a year after exceeding six years, and twice a year after exceeding 15 years. Operational passenger vehicles must be inspected once a year within the first five years and once every six months after exceeding five years. Trucks and large, medium-sized non-operational passenger vehicles must be inspected once a year within the first ten years and once every six months after exceeding ten years. 2. Vehicle annual inspection: Vehicle annual inspection (or vehicle inspection) refers to the annual inspection of vehicles that have obtained official license plates and driving licenses in accordance with the technical conditions for motor vehicle operation safety. The purpose is to check the main technical conditions of the vehicle, urge the strengthening of vehicle maintenance, keep the vehicle in good condition, and ensure driving safety.
6
2
Share

Are there any disadvantages to brake disc polishing?

Yes, here are the potential hazards after polishing a car's brake discs: 1. Brake Pads: Brake pads are the most critical safety components in a car's braking system. The effectiveness of braking is primarily determined by the brake pads. They create friction between the brake pads and the drum or disc, converting the kinetic energy of the moving vehicle into heat energy during the friction process, thereby achieving the goal of slowing down or stopping the vehicle. 2. Brake Fluid: Brake fluid (also known as hydraulic fluid) is mainly used in the car's hydraulic braking system to transmit pressure, enabling the wheel brakes to perform their braking function. 3. Brake Discs: Brake discs are primarily used for braking, with the braking force coming from the brake calipers. When the brake pedal is pressed during vehicle movement, the brake calipers clamp the brake discs to slow down or stop the vehicle.
15
5
Share

Which Lane to Take for a Left Turn on a Three-Lane Road?

When making a left turn onto a three-lane road, you should enter the leftmost lane. Here is relevant information: 1. Laws and Regulations: According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," motor vehicles passing through signal-controlled intersections must comply with the following rules: at intersections with marked lanes, enter the appropriate lane based on the intended direction of travel; vehicles preparing to enter a roundabout must yield to vehicles already inside the intersection. 2. Additional Information: Yield to vehicles with the right of way as indicated by traffic signs or markings; if there are no traffic signs or markings, stop before entering the intersection to observe and yield to vehicles coming from the right; turning vehicles must yield to vehicles going straight; right-turning vehicles from the opposite direction must yield to left-turning vehicles.
19
5
Share

Should You Press the Brake Once or Continuously?

When the vehicle speed is not too fast, press the brake slowly. When the vehicle speed is high, press the brake repeatedly to reduce the speed before pressing it slowly. Here is some relevant information: 1. Working Principle: Pressing the car's brake is similar to squeezing the brake on a bicycle. There is a fixed, non-rotating brake shoe on the car's axle, which has rough friction pads. When the driver presses the brake, high-pressure gas pushes the brake shoe to tightly grip the axle, preventing it from rotating. When the axle stops rotating, the wheels also stop turning, and the car naturally comes to a halt. 2. Dual Braking: Braking the wheels involves using the braking device to immobilize the wheels, stopping their movement. Directional braking is used in swivel wheels to convert them into fixed-direction wheels, maintaining a constant direction. Dual braking means both the wheels and direction are locked, providing a strong fixing effect.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.