···
Log in / Register

Which Side to Place the Temporary Parking Number Plate?

5 Answers
EdwardDella
07/29/2025, 01:31 AM

The most suitable place for a temporary parking plate is behind the front windshield on the passenger side. Placing it here does not obstruct the driver's view or create blind spots. More details are as follows: To make the temporary parking plate easily visible, it should be placed in a highly noticeable location, which is undoubtedly the lower part of the car's front windshield. Additionally, it must be positioned without affecting driving visibility. Therefore, the optimal location is behind the front windshield on the passenger side. There are also temporary parking plates on the market designed to be placed outside the front windshield, but these are not recommended. While they may work fine for short-term use, prolonged exposure to sun and rain will significantly reduce the adhesive's effectiveness. A temporary parking plate consists of a stand (base), digits, and a brightness LED light. It is a display card made from various materials, designed to show the vehicle owner's contact information for others' convenience, thereby ensuring safe parking. According to Article 62 of the "Road Traffic Management Regulations," vehicles temporarily parked outside designated parking areas must adhere to the following rules: Park on the right side of the road in the direction of traffic. The driver must not leave the vehicle, and any vehicle obstructing traffic must move away promptly. Before the vehicle comes to a complete stop, doors must not be opened, and passengers must not enter or exit. Doors must not block other vehicles or pedestrians. Parking is prohibited in the following areas: opposite sidewalks with railings (or green barriers), crosswalks, construction zones (except for construction vehicles), and near obstacles. Parking is also prohibited at intersections, railway crossings, sharp curves, narrow roads, bridges, steep slopes, tunnels, and within 50 meters of these locations.

Was this review help?
3
3
Share
JuneDella
08/12/2025, 03:36 PM

With over a decade of driving experience, I believe the most suitable spot for a temporary parking permit is at the lower driver's side of the front windshield, near the steering wheel. This position allows for quick viewing or removal by the driver while ensuring visibility to pedestrians or parking attendants, avoiding any obstruction that might cause accidents. I always secure it in the corner on the inside of the glass using suction cups or adhesive to prevent it from falling. Placing it too high or in the middle can distract the driver's view and affect reaction times in emergencies. Additionally, opt for reflective materials or bright labels for easy identification during nighttime parking. Avoid placing it on the dashboard or passenger seat, as it may slide or be stolen. Making this a habit ensures peace of mind when parking, prioritizing safety above all.

Was this review help?
13
4
Share
Expand All
VanTheo
10/03/2025, 02:49 AM

As a city driver who frequently needs to park temporarily, I usually place my parking placard on the dashboard near the windshield, either on the left or right side. The key is to make it visible without being obstructive. Nowadays, there are many movable magnetic signs or clip-on versions that I simply hang on air vents or window edges—easy to access and keeps things tidy. Placing it in the wrong spot, like the center of the windshield, can cause glare and discomfort while driving. Or if it's hidden too well, others might not find the contact number, causing delays. Through daily use, I've learned to wipe the surface clean before placing the sign to ensure it sticks firmly, and opting for compact designs saves space most effectively. Friends agree that proper placement makes moving the car smoother and helps avoid tickets. Since adopting this habit, parking has become much more convenient.

Was this review help?
15
4
Share
Expand All
ColinAnn
11/16/2025, 03:29 AM

After having kids, I pay extra attention to where to place the temporary parking sign. I usually fix it on the inner side of the driver's door or the area below the dashboard. Avoid placing it too high to prevent children from reaching and knocking it down or accidentally touching it; the side closest to you is the safest and doesn't obstruct your view. I've seen a friend place it on the center console, which affected visibility and caused a minor accident. Choose static cling or removable styles to protect the interior and avoid leaving adhesive marks. A related point is to ensure the sign is clean and the numbers are clearly readable when parking, so others don't have to wait in vain. Before heading out, check that the sign is securely in place and develop good parking habits for peace of mind.

Was this review help?
16
2
Share
Expand All
LuciaLynn
01/06/2026, 10:18 PM

As a car enthusiast, the best position for a temporary parking sign is the lower left corner or right side of the front windshield, secured with a suction cup for maximum reliability. I've tried various placements: placing it on the dashboard causes it to slide and be unstable; positioning it in the center reflects light and interferes with driving; and placing it on the door handle makes it inconvenient to see. Considering the vehicle's structure, choosing a sign with soft rubber or no-trace adhesive won't damage the glass or leather. Incorrect placement might affect sensors or air vents, leading to equipment issues. Opting for a high-quality reflective sign ensures easy identification during rainy nights, adding a thoughtful touch. Here's a tip: press lightly after placement to ensure it's secure, and replace the adhesive periodically. This method is simple and hassle-free—taking good care of your car requires a bit of attention to detail.

Was this review help?
5
1
Share
Expand All
More Forum Discussions

Why does one side of the xenon headlight require several switches to turn on?

Normal xenon headlights should start and remain lit immediately under the drive of the ballast. Working principle of xenon headlights: They are heavy metal lamps that fill the UV-resistant quartz glass tube with various chemical gases, such as xenon and other inert gases. Then, through a booster, the vehicle's 12-volt power supply is instantly increased to 23,000 volts. Under high voltage, xenon gas is ionized and produces a light source between the two poles of the power supply. Advantages of xenon headlights: Xenon bulbs have three times the light intensity of ordinary halogen bulbs, while consuming only two-thirds of the energy. Xenon bulbs use a light color nearly identical to daylight, creating better visual conditions for drivers. Xenon lighting provides a wider range and greater intensity of illumination, significantly improving driving safety and comfort.
16
5
Share

How to Copy the Mercedes-Benz Symbol?

The Mercedes-Benz logo symbol can be copied using Ctrl+C. Below is relevant information about the Mercedes-Benz vehicle series: Commercial Vehicle Series: The commercial vehicle series includes Trucks/Articulated Trucks, Econic, Axor, Atego, Actros, Unimog Engineering Vehicles, U300-U500, U3000-U5000. Light Commercial Vehicle Series: The light commercial vehicle series includes Vito (Vito), Vario (Vario), Sprinter (Sprinter), with the Vito body available in passenger and cargo versions, and the Vario and Sprinter available in passenger, cargo, and chassis bus versions, as well as Travego, Tourismo, Viano, Tourino, Minibus luxury commercial vehicles (MPV), Vito (Vito), Viano (Viano).
12
3
Share

How fast can a 7255 with an 800W motor run?

The typical speed of a 7255 with an 800W motor is between 35 km/h and 40 km/h. Methods to increase speed: By removing the voltage limit of the controller and increasing the current, the motor's speed can be improved. After removing the speed limit, the maximum speed can reach around 50 km/h. Using a new 84V battery, an 800W motor can achieve speeds above 60 km/h. Charging precautions: Normally, avoid charging for too long. In summer, high temperatures increase the risk of thermal runaway in the battery. It is best to charge for 6 to 8 hours based on time. If the battery is not used for a long time, it is recommended to recharge it every two months to avoid irreversible sulfation due to prolonged discharge, which can kill the battery. After 6 months to a year of use, it is advisable to add replenishing fluid to the battery to extend its lifespan.
15
5
Share

What are the symptoms of a faulty exhaust valve in the BYD F3?

The symptoms of a faulty exhaust valve in the BYD F3 include: the exhaust valve not sealing properly, abnormal exhaust gas recirculation, and the malfunction indicator light flashing. The exhaust valve, also known as the oil separator, is installed between the compressor outlet and the condenser inlet. It improves the efficiency of the condenser and evaporator by separating gases, making it particularly important. If issues arise, prompt repair or replacement is necessary. If the exhaust gas recirculation valve does not seal tightly, some exhaust gas will enter the intake manifold during engine idling, reducing the mixture of gases in the engine. The exhaust gas entering the manifold will mix with the air-fuel mixture, diluting the concentration of the mixture in the engine, which can affect the engine's idle performance. This may result in unstable idling or engine shaking, and in severe cases, may cause the engine to stall. The dimensions of the BYD F3 are 4533mm in length, 1705mm in width, and 1490mm in height.
5
4
Share

How many types of engines does Sinotruk HOWO have?

Sinotruk HOWO engines include the Steyr WD615, D10, and D12 engines, as well as the localized MAN engines: MC05, MC07, MC11, and MC13. Introduction to HOWO: HOWO is a model produced by Sinotruk Jinan Truck Co., Ltd., a subsidiary of China National Heavy Duty Truck Group (Sinotruk). The Chinese label on the certification of Sinotruk HOWO vehicles is 'Haoluo,' but in spoken language, it is rarely referred to as such. In daily communication, it is commonly called HOWO. HOWO is the English identifier for the model, primarily used in export vehicles. Basic configuration of HOWO dump truck: 375 horsepower, EGR China III engine, sleeper air conditioning, HW15710 transmission, ZF8098 imported steering gear, AC16 axle, HF9-ton front axle, 1200 tires, cargo box dimensions: 8200x2300x1000.
10
3
Share

Do I need to replace the vehicle license when changing my address?

There is no need to replace the motor vehicle license, but you must apply for record filing with the vehicle management office at the registration location. Relevant regulations: Article 17 of the "Motor Vehicle Registration Regulations": For a registered motor vehicle, if the owner's residence is relocated within the jurisdiction of the vehicle management office or the owner's name (unit name) or contact information is changed, it must be filed with the vehicle management office at the registration location. If the name or number of the owner's identity document is changed, an application for record filing can be submitted to the vehicle management office at the registration location. Notes for filing the vehicle license: If the engine number or vehicle identification number becomes unclear or damaged due to wear, corrosion, accidents, etc., an application for record filing can be submitted to the vehicle management office at the registration location. The motor vehicle owner must submit their identity document, motor vehicle registration certificate, and vehicle license.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.