···
Log in / Register

Which Side Should Motor Vehicles Drive On?

4 Answers
HarperRose
07/29/25 11:46pm
Motor vehicles should drive on the right side. Here are some guidelines for drivers: Precautions: When approaching residential area entrances, reduce speed. During morning or evening rush hours, practice courteous yielding. When passing bus stops, be sure to watch for pedestrians. In poor weather conditions, reduce speed to a safe driving level. When driving at night, pay attention to proper light usage. Reduced Speed Driving: When preparing to enter a congested roundabout, observe and yield to vehicles already in the intersection. During oncoming traffic when visibility is obstructed and opposing vehicles cannot be clearly seen, both vehicles should slow down, keep to the right, and sound their horns to signal presence to avoid potential hazards.
Was this review help?
10
0
Share
ElliotAnn
08/16/25 3:05am
I drive in the city every day, and keeping to the right is the most basic rule. Whether on highways or small roads, vehicles all travel on the right side, which makes traffic flow smoother and safer. For example, when making a left turn, I first move to the right to enter the road, avoiding collisions with oncoming straight-line traffic. China has implemented right-hand traffic rules since the 1960s, with laws clearly stipulating that motor vehicles must keep to the right. Violations may result in penalty points or fines. On the road, the driver's seat is on the left, providing clear visibility of oncoming traffic. Developing this habit is crucial, and beginners should practice multiple times to familiarize themselves with road signs and maintain a safe distance to reduce accident risks. When driving abroad, rules vary by country, so it's essential to research local regulations in advance.
Was this review help?
1
1
Share
Expand All
MichaelDella
10/19/25 4:00am
As a car enthusiast, I'm particularly fascinated by the history of traffic rules. Why do vehicles drive on the right? It originated during the French Revolution in the 18th century when people changed their habits to oppose the nobility. After Napoleon promoted it, the United States and many countries including China adopted right-hand traffic. Over 70% of the world drives on the right, with the steering wheel on the left, which helps drivers see oncoming traffic. Compared to left-hand traffic countries like the UK or Japan, right-hand traffic reduces conflicts at intersections and has a higher safety factor. However, when traveling abroad, you need to switch modes and use GPS to adapt to new rules. This rule not only improves efficiency but also makes driving smoother and more enjoyable.
Was this review help?
2
3
Share
Expand All
DiBryce
12/02/25 4:34am
In terms of safety, driving on the right side is truly effective in avoiding accidents. When vehicles travel on the right side of the road with the driver seated on the left, it provides better visibility of traffic ahead and at intersections, especially reducing the risk of head-on collisions at night. If one mistakenly drives on the left, it can easily lead to serious accidents, such as mistakenly entering the opposite lane when turning. Every time I drive, I adhere to the right-side driving rule, using road signs as assistance, as developing good habits is most crucial. China's traffic laws strictly regulate this, and violations can result in penalties, so it's important not to take it lightly.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

What Causes Car Jerking?

The reasons for car jerking are: 1. Engine oil passage blockage; 2. Dirty transmission oil clogging the oil passage; 3. Damaged transmission solenoid valve; 4. Forgetting to release the handbrake; 5. Irregular wear of the clutch; 6. Damaged solenoid valve; 7. Some engine cylinders not working; 8. Poor volatility of low-quality fuel. The solutions for car jerking are: 1. Check the transmission temperature and cooling system; 2. Replace the transmission oil; 3. Check if the internal valve body of the transmission is damaged and needs replacement; 4. Check for carbon deposits in the engine valves and intake pipe that need cleaning.
17
3
Share

How to Activate Honda's Auto-Lock Feature?

The method to activate Honda's auto-lock feature is as follows: With the ignition on, press and hold the lock button on the remote key for 10 seconds until the dashboard shows both turn signals lighting up, indicating activation. Taking the Honda CR-V 2021 Manual 2WD Classic Edition as an example, its body dimensions are: length 4621 mm, width 1855 mm, height 1679 mm, with a wheelbase of 2661 mm. The Honda CR-V 2021 Manual 2WD Classic Edition is equipped with a 1.5-liter turbocharged engine, delivering a maximum power of 142 kW at 5600 rpm and a maximum torque of 243 Nm between 2000 to 5000 rpm.
7
1
Share

What audio system does the Sagitar use?

The Sagitar is equipped with a Desay SV audio system, which is a radio and audio device designed to alleviate the monotony of travel for drivers and passengers. Taking the 2021 Sagitar as an example, its body dimensions are: length 4753 mm, width 1800 mm, height 1462 mm, with a wheelbase of 2731 mm and a trunk capacity of 553 liters. The 2021 Sagitar is powered by a 1.2L turbocharged engine, delivering a maximum power of 85 kW and a maximum torque of 175 Nm, paired with a 5-speed manual transmission. It features a MacPherson independent front suspension and a multi-link independent rear suspension.
19
1
Share

How to Replace the Key Battery for BYD?

The method to replace the key battery for BYD is as follows: 1. Remove the mechanical key; 2. Along the slot where the mechanical key is stored, forcefully pry open the key's outer shell; 3. Use a blade to remove the battery from the edge gap; 4. After installing the new battery, reassemble the key shell. Taking the BYD S6 as an example, it is a mid-size SUV with body dimensions of: length 4810 mm, width 1855 mm, height 1680 mm, a wheelbase of 2720 mm, and a fuel tank capacity of 72 liters. The BYD S6 is equipped with a 1.5L turbocharged engine, delivering a maximum power of 113 kW at 5200 rpm, paired with a 6-speed manual transmission.
15
3
Share

How to Distinguish Between Run-Flat Tires and Regular Tires?

Run-flat tires and regular tires can be distinguished by the following methods: 1. Appearance: Run-flat tires have special markings, while regular tires do not; 2. Structure: The sidewalls of run-flat tires are thicker than those of regular tires; 3. Performance: In addition to the functions of regular tires, run-flat tires can allow the vehicle to travel a certain distance even when the tire pressure is zero. Tire maintenance methods include: 1. Regularly check tire pressure; 2. Regularly check front wheel alignment; 3. Avoid dragging tires on the ground to reduce tread wear; 4. Control speed appropriately based on the gradient, length, and road conditions; 5. Drive according to road conditions.
20
5
Share

Where is the oxygen sensor located?

The oxygen sensor is located on the engine exhaust pipe. It uses a ceramic sensing element to measure the oxygen potential in the vehicle's exhaust pipe, calculates the corresponding oxygen concentration based on the principle of chemical equilibrium, and achieves the purpose of monitoring and controlling the combustion air-fuel ratio to ensure product quality and exhaust emission compliance. The functions of the oxygen sensor are: 1. To determine whether there is excess oxygen in the exhaust after engine combustion and convert the oxygen content into a voltage signal transmitted to the engine computer; 2. To enable the engine to achieve closed-loop control targeting excess air, ensuring that the three-way catalytic converter has high conversion efficiency for pollutants such as hydrocarbons, carbon monoxide, and nitrogen oxides in the exhaust, thereby maximizing the conversion and purification of emission pollutants.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.