···
Log in / Register

Which side mirror should I look at when reversing into the right parking space?

4 Answers
DelArabella
07/29/25 5:47pm

When reversing into the right parking space, you need to check both side mirrors, but you should first look at the right mirror until the rear wheel enters the parking corner, then gradually shift your attention to the left mirror. Techniques for right-side parking include: Turning the steering wheel to the right: Control the clutch properly, release it slowly, and let the car start moving backward. Maintain a steady speed while paying attention to the left rearview mirror. When the lower edge of the mirror aligns with the line, quickly turn the steering wheel all the way to the right. Straightening the steering wheel: After turning the steering wheel fully to the right, the car continues to move backward. Keep moving and focus on the right rearview mirror. When you see the nearest corner of the right parking line from the mirror, maintain a distance of 30cm between the car and the corner. This is a standard to judge whether the car can be parked correctly. If the 30cm distance is accurate, no further adjustments are needed. Slowly reverse the car until the side line becomes parallel with the car body, then straighten the steering wheel and gradually back into the parking space.

Was this review help?
4
5
Share
LuciaRose
08/14/25 9:23am

As a beginner learning to drive, I always feel nervous when reversing into parking spaces, especially during right-side reverse parking. I mainly focus on the right-side rearview mirror to clearly see the position of the right boundary line and the wheels, avoiding scraping against walls or obstacles. However, I also pay attention to the left-side rearview mirror and the interior rearview mirror to ensure the left rear wheel doesn’t rub the edge or if a pedestrian suddenly appears. When practicing reverse parking, it’s best to find an open space and use a reference point like a pole or parking line aligned with the mirror. Adjust the seat height for a better view. A common mistake is fixating on one mirror, which can lead to distraction. It’s recommended to reverse slowly, combine slight head turns to check the actual surroundings, and roll down the window to listen for ambient sounds for added safety. Remember, practice makes perfect—stay calm, make small steering adjustments before straightening the wheels, and avoid rushing or speeding.

Was this review help?
10
1
Share
Expand All
KateRose
10/14/25 2:16am

I've been driving in the city for years, and parallel parking is a routine task. When reversing to the right, it's natural to look at the right-side mirror as it directly shows the distance between the right rear wheel and obstacles, helping you precisely control the position of the rear. Here are some practical tips: adjust the mirror angle according to the size of the car—for example, tilt it slightly upward for small cars and downward for SUVs to see the wheels better. Never rely solely on one mirror; sometimes, using a backup camera or radar is better, but the core is still to observe yourself. Sharing some experience: maintain a slow and steady speed when reversing, and straighten the steering wheel in time to prevent the car from tilting and avoid collision risks. During practice, use fake targets like cardboard boxes to simulate obstacles—once you gain proficiency, you can operate more confidently. Safety first: always confirm there's no one around before moving.

Was this review help?
11
1
Share
Expand All
EzraLee
11/27/25 3:12am

As a daily driver, I prioritize checking the right-side mirror to control the space on the right when reversing into a parking spot. Here's a simple method: Align the mirror with the parking space line or corner position to quickly judge if the distance is safe. Also, remember to observe the overall environment and use the interior rearview mirror to prevent sudden situations, such as a child running close. Adjust according to your vehicle—small cars are easier, while larger vehicles may require a few more glances. Additional tips: Regularly clean the mirrors to ensure clarity and avoid blurred vision; maintain a steady speed during reversing and don’t rush. If you make a mistake, correct it promptly. Gaining experience through practice is key.

Was this review help?
15
4
Share
Expand All
More Forum Discussions

How to Replace the Turn Signal Light on a Geely Emgrand?

Geely Emgrand turn signal light replacement method is: 1. Open and secure the car hood; 2. Locate the turn signal above the headlight assembly; 3. Twist the old turn signal counterclockwise to remove it and install the new one. The Geely Emgrand has body dimensions of: length 4632mm, width 1789mm, height 1470mm, with a wheelbase of 2650mm. The Geely Emgrand is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 80kW and maximum torque of 142Nm. It features front-wheel drive, with MacPherson strut front suspension and torsion beam rear suspension.
7
4
Share

How Often Should the BMW 5 Series Alternator Belt Be Replaced?

The alternator belt of the BMW 5 Series should be replaced every 80,000 kilometers. The alternator belt is one of the main belts in a car, connecting components such as the alternator, air conditioning compressor, power steering pump, idler pulley, tensioner pulley, and crankshaft pulley. The power source for the alternator belt is the crankshaft pulley, with power provided by the rotation of the crankshaft. The BMW 5 Series has a body size of 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3105mm and a fuel tank capacity of 68 liters. Its body structure is a 4-door, 5-seat sedan, equipped with a 2.0T turbocharged engine that delivers a maximum power of 135kW and a maximum torque of 290Nm, paired with an 8-speed automatic transmission.
8
0
Share

Why can't the Passat detect the key?

The reasons why the Passat cannot detect the key are: 1. The anti-theft system is not deactivated, and the signal cannot be detected; 2. Or the key has been dropped or impacted, causing the chip inside the key to shift position. The body dimensions of the Passat are: length 4933mm, width 1836mm, height 1469mm, wheelbase 2871mm, and fuel tank capacity 68.5 liters. The Passat is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW and a maximum torque of 250Nm. It uses a MacPherson strut front suspension and a multi-link independent rear suspension.
8
1
Share

What maintenance items are needed for a car at 20,000 kilometers?

Maintenance items for a car at 20,000 kilometers include: 1. Engine oil; 2. Oil filter; 3. Fuel filter; 4. Air filter; 5. Cabin air filter; 6. Spark plugs; 7. Coolant. The purposes of car maintenance are: 1. To ensure the vehicle is in optimal operating condition; 2. To effectively improve vehicle efficiency and reduce wear on parts and tires; 3. To enhance driving safety; 4. To prevent vehicle breakdowns; 5. To reduce noise and environmental pollution; 6. To maintain the vehicle's appearance and prevent damage. Key considerations for car maintenance include: 1. Using high-quality lubricants; 2. Performing scientific and reasonable repairs; 3. Maintaining proper tire inflation.
19
5
Share

Where is the sunroof drain located?

The sunroof drains are located inside the vehicle's A-pillars and C-pillars. The functions of a sunroof are: 1. Effectively ventilate the interior and increase fresh air intake; 2. Provide an open view and meet the shooting requirements for mobile photography. The sunroof is installed on the roof and can be opened by: rotating the sunroof switch button. There are several types of car sunroofs: built-in sunroofs, pop-up sunroofs, and panoramic sunroofs. Maintenance methods include: 1. Clean the sunroof drainage channel promptly and regularly wipe the sunroof rails with a damp sponge; 2. Apply silicone oil to the sunroof seal after washing the car to effectively prevent aging of the rubber seal and extend its service life.
17
0
Share

What is the emission standard for the 2018 Sagitar?

The 2018 Sagitar complies with the China V emission standard. The emission standard refers to regulations on the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and carbon smoke emitted from vehicle exhaust. The dimensions of the 2018 Sagitar are: length 4655mm, width 1780mm, height 1453mm, with a wheelbase of 2651mm and a minimum ground clearance of 113mm. The 2018 Sagitar is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 81kW and a maximum torque of 155Nm, paired with a 5-speed manual transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.