Which Side is the Brake and Which Side is the Accelerator in a Car?

1 Answers
LeilaniDella
09/03/25 8:17am
Automatic transmission cars have two pedals: the left one is the brake pedal, and the right one is the accelerator pedal. Manual transmission cars have three pedals: the far left is the clutch pedal, the middle is the brake pedal, and the far right is the accelerator pedal. The brake pedal is used for deceleration and stopping, while the accelerator pedal is used for acceleration. The clutch pedal is used when starting or shifting gears. The brake pedal is a power-limiting pedal used for deceleration and stopping, and its frequency of use is very high. How the driver controls it directly affects the safety of driving. The clutch pedal is the control device for the clutch assembly in manual transmission cars, enabling the engagement and disengagement of the front and rear parts of the clutch (the engine and the transmission). The main function of the accelerator pedal is to control the opening of the engine throttle, thereby regulating the engine's power output.
Was this review help?
11
5
Share
More Forum Discussions

What to Do If Your Driving License Points Are Deducted and Not Handled for More Than 15 Days?

Solution for driving license points being deducted and not handled for more than 15 days: Go to the traffic management department of the public security organ at the place where the motor vehicle driving license was issued or where the illegal act occurred to make up for the seven-day study of road traffic safety laws, regulations, and related knowledge. Passing the subject one exam will clear the points and return the motor vehicle driving license. The following is an introduction to the car driving license: 1. Definition of motor vehicle driving license: It refers to the legal certificate issued by the management department after the person who is legally allowed to learn to drive a motor vehicle has mastered the knowledge of traffic regulations and driving skills and passed the examination. 2. Examination subjects for motor vehicle driving license: Include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
17
3
Share

What does Land Rover's second-generation terrain system mean?

Land Rover's second-generation terrain system refers to the second-generation Terrain Response system, which controls parameters such as the engine, transmission, gear shifting, four-wheel drive system, and dynamic control system through pre-set programs. It is specially optimized for certain road conditions, such as snow, ruts, sand, and rocks, making it easier for drivers to navigate these terrains. The second-generation terrain system can automatically identify the terrain and utilize multiple subsystems to achieve the optimal vehicle performance for that specific terrain. The Land Rover Range Rover is equipped with this second-generation terrain system, featuring a front-engine, four-wheel drive layout. The vehicle's dimensions are 4999mm in length, 2073mm in width, 1835mm in height, with a wheelbase of 2922mm.
14
0
Share

What is the reason for the SRS light being on?

SRS light being on is caused by: 1. Foreign objects around the airbag sensor wiring harness; 2. ECU sensor data reporting errors; 3. The vehicle being parked in a humid environment for a long time or the wiring interface becoming damp during car washing. SRS refers to the Supplemental Restraint System (airbag). If the light is on, it indicates a fault in the airbag or seat belt pretensioner system. The SRS mainly consists of airbag sensors, collision airbags, and electronic control devices, working in conjunction with seat belts to provide effective collision protection for occupants. The driver-side collision airbag is installed in the steering wheel, while the passenger-side collision airbag is usually installed in the dashboard.
1
1
Share

What is Car Glazing?

Car glazing refers to a common automotive paint maintenance procedure where glaze is infused into the microscopic pores of the vehicle's paint surface. This process endows the paint with properties such as oxidation resistance, corrosion resistance, and high-temperature tolerance. Glaze is a byproduct derived from petroleum refining, characterized by acid resistance, corrosion prevention, heat resistance, and abrasion resistance. After glazing treatment, the vehicle's paint surface can achieve or even surpass the original factory finish, revitalizing older vehicles and enhancing the luster of new cars. Additionally, it lays the foundation for future automotive detailing, paint baking, and refurbishment. Over time, airborne dust particles can create numerous micro-scratches on the paint surface, which appear as dense concentric circles under light. The glazing process utilizes polishing machines to repair and restore the paint's shine.
19
4
Share

How High Should Car Seats Be Adjusted?

Car seats should be adjusted to a suitable height based on the driver's body size, and the ideal height varies depending on the driver's physique. Generally, the standard for adjusting seat height is that it should not obstruct the driver's view or interfere with driving. Typically, the driver's line of sight should be in the upper-middle position of the front windshield. The specific steps for adjusting the seat are: 1. Adjust the distance between the seat and the steering wheel to a comfortable value, with the knees slightly bent, allowing easy and smooth operation of the accelerator and brake pedals; 2. Adjust the seat height so that the driver's eyes are level with the upper-middle position of the front windshield, avoiding a position that is too low to prevent the steering wheel and dashboard from blocking the view; 3. Adjust the seat headrest; 4. Adjust the lumbar support position of the seat.
1
1
Share

What does the wrench symbol mean in a Honda car?

Honda displays the wrench symbol to remind the owner to perform scheduled maintenance based on mileage. The following are the specific impacts of not adhering to the maintenance schedule: 1. Bearing labor costs: For vehicles within the warranty period, failing to perform basic maintenance on time means that if a malfunction occurs, the owner will need to pay for parts and labor fees at the 4S shop. If the issue is related to the circuit, the manufacturer will not be responsible. 2. Compromised driving safety: As engine oil comes into contact with air and heat, it gradually oxidizes. Over time, acidic substances, sludge, and metal particles increase, turning the oil darker and reducing its viscosity. Prolonged failure to change the oil may lead to clogged oil passages, resulting in dry friction in the engine and severely affecting its lifespan. 3. Smoke and fire hazards: Coolant's heat dissipation performance declines, making it prone to forming scale. Continuing to drive with an overheated engine can easily lead to smoke and fire hazards.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.