···
Log in / Register

Which side is the accelerator in an automatic transmission car?

4 Answers
McNolan
07/29/25 4:43pm

In an automatic transmission car, the accelerator is on the right side. Here are some related details: 1. Automatic transmission models only have an accelerator pedal and a brake pedal, both controlled by the right foot. The brake pedal is on the left, and the accelerator pedal is on the right. 2. To prevent confusion while driving an automatic car, manufacturers design the accelerator pedal to be lower and the brake pedal higher. This helps avoid mistakenly pressing the accelerator instead of the brake, reducing the risk of accidents. When driving an automatic car, it's essential to always be aware of the brake pedal, regardless of the road conditions, so you can take immediate braking action in emergencies. 3. Compared to manual transmission cars, driving an automatic car frees up the left foot, eliminating the need for frequent gear changes. Additionally, automatic cars are often more convenient for female drivers. 4. Generally, automatic transmission cars are more expensive than manual ones, primarily because they use an automatic gearbox, which is structurally more complex than a manual transmission.

Was this review help?
13
5
Share
Scott
08/14/25 6:14am

When I first learned to drive an automatic car, my biggest worry was stepping on the wrong pedal between the accelerator and brake. In reality, the foot position in the driver's seat is quite simple: the pedal on the right is the accelerator, which speeds up the car when pressed lightly; the one on the left is the brake, used for slowing down or stopping. This design follows international standards, making it easier for right-handed people to operate the accelerator with their right foot. Beginners like me tend to panic easily, but with more practice behind the wheel, you'll quickly get familiar with the positions. Automatic cars don’t have a clutch pedal, simplifying driving, but you need to be mindful of the accelerator's sensitivity. I recommend that new drivers adjust their seat distance properly before driving to ensure their feet can stretch naturally, avoiding accidental presses in emergencies. Safety comes first—always double-check that the accelerator is on the right before driving to reduce the risk of accidents, especially at night or on crowded roads. Stay calm, and with practice, you’ll gain confidence in driving.

Was this review help?
16
4
Share
Expand All
McLorenzo
10/13/25 2:44am

When teaching family members to drive, I always start with the pedal positions. In an automatic transmission car, the accelerator is the right pedal. Gently pressing it with the right foot provides noticeable and safe acceleration. The left pedal is the brake, primarily used for deceleration. This design is universally standardized to maintain consistency and prevent confusion. Beginners often get nervous and press the wrong pedal, so I emphasize practicing in open areas—starting from a standstill and gradually moving forward—to reinforce the habit of using the right pedal for acceleration. While automatic transmissions simplify gear shifting, careful control of the accelerator is crucial to avoid sudden acceleration and loss of control. I also remind them to check pedal positions before driving to prevent accidents caused by misoperation. Developing good habits ensures smoother driving.

Was this review help?
17
3
Share
Expand All
ODonovan
11/26/25 3:42am

After driving for many years, the accelerator pedal of an automatic transmission is naturally on the right. When sitting in the driver's seat, extending your foot, the right pedal is the accelerator, gently press to accelerate; the left one is the brake. Once accustomed, it becomes almost instinctive, with smooth operation. The design is consistent, with manual transmissions also having the accelerator on the right. When starting the car, control gently to avoid sudden presses that cause jerking. Remember the positions well for safe and worry-free driving.

Was this review help?
19
0
Share
Expand All
More Forum Discussions

How to Reset the Tire Pressure Light on the New Accord?

The method to reset the tire pressure light on the new Accord is: 1. Press the menu button on the left side of the steering wheel; 2. Select vehicle settings; 3. Choose tire pressure calibration. Taking the 2021 Accord Luxury Starry Sky Limited Edition as an example, it is a mid-size 4-door 5-seater sedan with body dimensions of length 4893mm, width 1862mm, height 1449mm, a wheelbase of 2830mm, and a fuel tank capacity of 56 liters. The 2021 Accord Luxury Starry Sky Limited Edition is equipped with a 1.5T turbocharged engine and a CVT continuously variable transmission, with a maximum power of 143 kilowatts, a maximum power speed of 5500 revolutions per minute, and a maximum torque of 260 Newton meters. Its drive mode is front-wheel drive, with a front suspension using a MacPherson independent suspension and a rear suspension using a multi-link independent suspension.
9
0
Share

Why is it difficult to control the speed when practicing with an automatic transmission?

Practicing with an automatic transmission and having difficulty controlling the speed may be due to improper pedal control and not mastering the starting technique. Here are some relevant details: 1. Automatic transmission: As the name suggests, an automatic transmission does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Generally, automatic transmission cars have six gear positions, from top to bottom: P, R, N, D, S, L. 2. Brake pedal: The key to controlling an automatic transmission car at low speeds is to manage the brake pedal properly. In this case, the brake pedal functions similarly to the clutch pedal in a manual transmission, except that the automatic transmission integrates these two functions, with the clutch being controlled by the computer without human intervention.
3
0
Share

What Causes the Rustling Noise in the Festa Steering Wheel?

Below are the reasons for the rustling noise in the Festa steering wheel: 1. Sound from the turn signal rebound clip: The noise occurs when turning the steering wheel clockwise, with three sounds per full rotation, and disappears when the turn signal is turned off. 2. Noise from the steering column dust cover: Lack of lubrication in the steering column dust cover causes dry friction sounds, which can be eliminated by applying lubricant inside the dust cover. 2. Below is an introduction to the steering wheel: 1. Steering wheel overview: The steering wheel is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. 2. Steering wheel function: The steering wheel converts the force applied by the driver to the edge of the wheel into torque, which is then transmitted to the steering shaft.
12
4
Share

What is the method to reset the tire pressure light on the Honda Avancier?

Honda Avancier tire pressure light reset method is: 1. Start the car; 2. Press the cae button on the central display screen; 3. Select tire settings in the vehicle settings options; 4. Click set in the tire settings; 5. Click confirm in the pop-up prompt. The Honda Avancier is a mid-size 5-door 5-seat SUV with body dimensions of: length 4858mm, width 1942mm, height 1670mm, wheelbase 2820mm, equipped with a 1.5T turbocharged engine and CVT continuously variable transmission, maximum power of 142 kilowatts, and maximum torque of 243 Newton meters.
3
4
Share

What is the introduction to the gears of a manual-automatic transmission?

The introduction to the gears of a manual-automatic transmission is: 1. M stands for manual mode; 2. P stands for parking gear; 3. R stands for reverse gear; 4. N stands for neutral gear; 5. D stands for drive gear; 6. S stands for sport gear. Both P gear or N gear can be used to start the vehicle, and the engine can be turned off in any gear. A manual-automatic transmission is a transmission device that combines the functions of manual and automatic transmissions. The method of using the manual mode of a manual-automatic transmission is: directly shift the gear to the manual mode, i.e., the M position, and moving the gear lever towards the plus or minus signs can increase or decrease the speed. There is no need to press the brake or release the accelerator when switching to manual mode.
20
3
Share

Where is the computer diagnostic connector of Chery QQ located?

The computer diagnostic connector of Chery QQ is located below the right storage compartment, which can be seen by looking down. The automotive diagnostic interface, also known as the OBD interface, is an electrical socket of the on-board self-diagnostic system. When connecting, it should be inserted with the power off. The automotive diagnostic interface has a total of 16 pins, each representing a different function. The length, width, and height of Chery QQ are 3550 mm, 1508 mm, and 1491 mm respectively. Chery QQ is equipped with two types of engines: 1.1L and 0.8L. In terms of configuration, Chery QQ is equipped with remote central door locks, electric window regulators, electric rearview mirrors, aluminum alloy rims, automatic window and door closing system, and other equipment.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.