Which side is the accelerator in an automatic transmission?

Where is the three-way catalytic converter located in a car?

The three-way catalytic converter is generally installed in the first bulge of the car's exhaust manifold, resembling a device similar to a canteen. It is positioned within the vehicle's exhaust system and serves as a crucial external purification device in the exhaust system. The term "three-way" in the three-way catalytic converter has two interpretations: First, it can convert the three main harmful substances produced after engine combustion into harmless substances. This converter simultaneously transforms the three primary harmful substances resulting from engine combustion into harmless materials, hence the name "three-way." The three main substances are: carbon monoxide, hydrocarbons, and nitrogen oxides. Second, because this converter contains three precious metals: platinum, rhodium, and palladium, it is called "three-way." These three precious metals facilitate the reaction between the three main harmful gases produced after engine combustion, ultimately forming harmless carbon dioxide, nitrogen dioxide, and water.

9

1

Share

What is the normal tire pressure for the Atenza?

The normal tire pressure range for the Atenza is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. The Atenza's tire pressure monitoring system is an indirect type, which only alerts when the tire pressure is abnormal and does not display specific values. To check the tire pressure, first prepare a tire pressure gauge, locate the position of the factory tire pressure label, press the gauge onto the tire valve to measure and read the pressure, and remember to replace the valve cap after measurement. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. The tire pressure monitoring system has not been reset. After inflating the tires, if the tire pressure reset is not performed promptly, the system will still record the previous data, causing the indicator light to come on. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation port. If the sensor is damaged during driving, it can also trigger the tire pressure warning light. For sensor damage issues, the only solution is to replace it with a new component.

20

5

Share

What brand is the vv7 car?

vv7 is a car from the WEY brand, which is an automotive brand under Great Wall Motors. The vv7 is a midsize SUV with body dimensions of 4760mm in length, 1931mm in width, and 1665mm in height, with a wheelbase of 2950mm and a fuel tank capacity of 65 liters. It is equipped with a 2.0T inline 4-cylinder turbocharged engine, delivering a maximum power of 167kW at 5500 rpm, paired with a 7-speed dual-clutch transmission. The vv7 features a MacPherson strut front suspension and a multi-link independent rear suspension.

2

Share

Which Cars Have a Horse Logo on the Steering Wheel?

Cars with a horse logo on the steering wheel include Ferrari and Mustang. Ferrari is an Italian automotive brand, with main models such as: F40, F50, ENZO, 550 Maranello, 575M Maranello, F355, F360, etc. Mustang is a Chinese automotive brand, with main models including: Mustang EC70, Mustang EC30, Mustang Bojun, Mustang Spica, Mustang EC60, etc. Taking the Ferrari F40 as an example, its body dimensions are: length 4430 mm, width 1980 mm, height 1130 mm, equipped with a mid-mounted 90-degree V8 engine, with a maximum power of 351.8 kW and a maximum torque of 577.7 Nm.

8

4

Share

How many cylinders does the Volkswagen Sagitar engine have?

Volkswagen Sagitar is equipped with a four-cylinder engine, developed by Volkswagen Group and manufactured by FAW-Volkswagen Engine (Chengdu) Co., Ltd. The 1.2T version of Volkswagen Sagitar uses the EA211-DLS engine model, with a maximum power of 85kW, maximum torque of 175N·m, and maximum horsepower of 116. The 1.4T version employs the EA211-DJS engine model, delivering a maximum power of 110kW, maximum torque of 250N·m, and maximum horsepower of 150. Here are some daily maintenance methods for Volkswagen Sagitar's engine: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, causing various problems for the engine. To avoid failures, change the oil regularly according to usage conditions and maintain an appropriate oil level; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area, accelerating engine wear and internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. When the amount is small, it suspends in the oil; when large, it precipitates, clogging filters and oil holes, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine's normal operation but also extends the overall lifespan of the radiator and engine.

2

3

Share

What is the method to reset the maintenance reminder for the Suzuki SX4?

The method to reset the maintenance reminder for the Suzuki SX4 is: 1. Turn on the ignition switch of the Suzuki SX4; 2. Press and hold the selection button on the right indicator for more than 5 seconds, the instrument display will flash 'OIL' once and then continue to display 'OIL'; 3. Release the selection button and quickly press it 5 times within 2 seconds; 4. After 'OIL' flashes 3 times and then goes off, the maintenance reset is completed. The Suzuki SX4 is a compact car with body dimensions of: length 4135 mm, width 1755 mm, height 1605 mm, wheelbase of 2500 mm, and a fuel tank capacity of 70 liters.

2

4

Share

Which side is the accelerator in an automatic transmission?

Where is the three-way catalytic converter located in a car?

What is the normal tire pressure for the Atenza?

What brand is the vv7 car?

Which Cars Have a Horse Logo on the Steering Wheel?

How many cylinders does the Volkswagen Sagitar engine have?

What is the method to reset the maintenance reminder for the Suzuki SX4?

What are the differences between the Mercedes-Benz E-Class and C-Class?

What is the Difference Between Automatic and Manual Transmissions?

What are the steps to use the auto hold function?

What is the difference between fog lights and low beams?