Which Sedans Comply with China 5 Emission Standards?

2 Answers
MacAdaline
07/29/25 1:32am
China's fifth-stage motor vehicle pollutant emission standard, abbreviated as "China 5 Standard", applies to most vehicles produced between 2017 and 2018, including models from Haima, Dongfeng Xiaokang, Dongfeng, and others. However, this is not universally applicable as different regions implemented the emission standards at varying times. For specific information, it's advisable to consult local 4S dealerships. Methods to identify China 5 Standard vehicles: 1. The simplest method is to check the vehicle's environmental protection label, which clearly indicates the emission standard. This information can also be found on the vehicle registration certificate and is typically marked on the windshield. 2. Query through professional websites: Visit the official website of the Motor Vehicle Emission Pollution Supervision and Management Center for verification. Note that discrepancies may occur between the product certification and website information, with the website data being the authoritative source. 3. Present the vehicle registration certificate (original or copy) at the environmental protection window of the local vehicle management office or the regional Motor Vehicle Pollution Management Center. Staff members can provide the official emission standard information.
Was this review help?
17
4
Share
DelAutumn
08/12/25 5:38am
I've driven quite a few China V emission standard vehicles, such as the Toyota Camry, Honda Accord, and Volkswagen Passat. These cars were all produced before 2017. When I purchased them, I paid special attention to the emission standards - China V represents the fifth phase of environmental requirements, which was quite common for new or imported vehicles between 2015 and 2017. I've also driven the Ford Mondeo and Chevrolet Malibu, which were very convenient to use in second-tier cities since not all areas had traffic restrictions. If you're considering buying a used car, you might want to prioritize mainstream brands from those model years - they're affordable and practical. China V vehicles have better emissions than China IV, but they don't meet the newer, higher requirements of the subsequent China VI standard.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What is the tire pressure for the 2020 BMW X1 run-flat tires?

The front tire pressure should be between 2.0--2.3, and the rear tire pressure should be between 2.2--2.5. Run-flat tires: "The standard tire pressure is 240kpa-250kpa, while the reinforced tire pressure is 280kpa-290kpa. The tire pressure differs between cold and hot tires, with hot tires having about 20kpa higher pressure than cold tires. The manufacturer's recommended value refers to the cold tire pressure, which is around 230kpa-250kpa when the car is cold. However, the specific tire pressure should be based on the value marked on each vehicle. Pressure adjustment method: According to the principle of thermal expansion and contraction, in summer, the pressure can be adjusted 0.1-0.2 lower than the normal value, and in winter, it can be adjusted 0.1-0.2 higher than the normal value. The normal value here must refer to the car's manual. A reasonable pressure is 70%-80% of the maximum pressure marked on the tire, but the pressure should preferably not exceed the maximum pressure marked on the tire.
14
5
Share

Why does the timing chain of Audi A4 jump teeth again after replacement?

Audi A4's timing chain jumps teeth again after replacement because the tensioner is broken, which affects the engine timing and causes the teeth to jump. The function of the timing belt: The timing belt is crucial for the normal operation of the engine. Once the timing belt is damaged, the valves and ignition will stop working, and in severe cases, the cylinder head may also be damaged. As the engine operating time increases, the timing belt and its accessories, such as the timing belt tensioner pulley, timing belt tensioner, and water pump, will wear out or age. Therefore, each time the belt is replaced, these accessories should be carefully checked to ensure they are in good condition. Precautions for using the timing belt: During use, regularly inspect the condition of the timing belt. If cracks are seen on the surface of the timing belt, pay attention to whether the belt is aging. If there is abnormal noise while driving, check whether the timing belt is installed correctly.
19
5
Share

Is it mandatory to buy insurance when purchasing a car?

It is mandatory to purchase compulsory traffic insurance when buying a car, while ordinary commercial insurance can be freely chosen. If compulsory traffic insurance is not purchased, once caught by traffic police, the consequences include: 1) vehicle impoundment, 2) requirement to back-pay the compulsory insurance, and 3) a penalty of twice the compulsory insurance premium. Compulsory traffic insurance, short for Compulsory Motor Vehicle Traffic Accident Liability Insurance, is a mandatory insurance required by the state for every vehicle owner. It is a compulsory liability insurance where the insurance company compensates for personal injuries, deaths, and property losses (excluding the vehicle's occupants and the insured) caused by road traffic accidents involving the insured vehicle, within the liability limits. It is a type of liability insurance with a coverage period of one year. Automobile commercial insurance is essentially commercial motor vehicle insurance. Commercial motor vehicle insurance is voluntarily purchased by the vehicle owner from commercial insurance companies, in addition to the state-mandated compulsory traffic insurance. Common types of automobile commercial insurance include vehicle damage insurance, third-party liability insurance, theft insurance, and passenger liability insurance. Process for purchasing insurance: Prepare documents: For individual vehicle insurance, the driver should bring their ID card, driver's license, vehicle registration certificate, letter of introduction, and other relevant documents for the insured vehicle. For vehicles engaged in individual business operations, additional documents such as business license and transport permit should be brought to the insurance company. Fill out the policy after vehicle inspection: The insurance company will conduct a vehicle inspection at a designated inspection site. The review is to confirm whether the vehicle meets the insurance company's underwriting conditions. If approved, the policy can be filled out. The vehicle owner should verify the policy details to ensure accuracy before selecting the insurance types. Pay the premium after confirmation: After confirming the policy and selecting the insurance types, the premium can be paid. Upon payment, the policyholder and the insurer can sign the insurance certificate, after which the insurance company will issue a receipt.
8
4
Share

What is the normal tire pressure for BYD F3?

According to the provisions and requirements of the international GBT2978-2008 standard, the tire pressure for BYD F3 is generally between 2.0~2.5 BAR. Tire pressure monitoring is the real-time automatic monitoring of tire pressure during vehicle operation, with alarms for tire leaks and low pressure to ensure driving safety. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data. The system automatically alerts when tire pressure is too low or there is a leak. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, resulting in a faster rotation speed compared to other wheels. By comparing the differences in rotation speeds between tires, the system monitors tire pressure. Indirect tire pressure monitoring systems essentially rely on calculating the rolling radius of tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of the above two systems, equipping direct sensors in two diagonally opposite tires and an indirect system for all four wheels. Compared to using only direct systems, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time data of actual pressure in all four tires like direct systems.
20
3
Share

What is the material of the Cayenne body?

The material of the Cayenne body is lightweight steel. Advantages: Fashionable and dynamic appearance; High-end and luxurious; Spacious interior; Fine interior craftsmanship with rich configurations; Good handling performance; High safety coefficient. Exterior: The Porsche Cayenne has a fashionable and dynamic exterior, with complete and smooth overall lines and a strong sporty vibe. Netizens describe it as "tall and majestic in appearance, with a very imposing front face." Interior: The interior craftsmanship of the Porsche Cayenne is relatively fine; The configurations are quite comprehensive; The seats are comfortable; The steering wheel's automatic heating and the armrest design next to the seats are more user-friendly; Optional configurations such as the panoramic sunroof and compass cater to some consumers' pursuit of individuality. Space: The interior space of the Porsche Cayenne is relatively spacious; The storage compartments are abundant and practical; The trunk space is slightly smaller compared to other models in the same class. Handling: The Porsche Cayenne has clear gear positions and smooth shifting; Some netizens have commented that "the steering wheel lacks road feel, but the steering is precise, the suspension is on the stiffer side, and the body roll is minimal during high-speed cornering."
7
3
Share

How Many Questions Are There in the Driving License Theory Test (Subject 1)?

The driving license theory test (Subject 1) consists of 100 questions. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," it includes single-choice questions and true/false questions, with each question worth 1 point, totaling 100 points. If a test-taker answers 11 questions incorrectly during the exam, the system will automatically submit the test and end the session. Subject 1, also known as the theoretical driving test or driver theory test, is part of the motor vehicle driving license assessment. The test covers fundamental driving theory, road safety laws and regulations, local regulations, and related knowledge. The exam is conducted on a computer, with a time limit of 45 minutes. Subject 1 test content: regulations on driving licenses and motor vehicle management; road traffic conditions and rules; road traffic safety violations and penalties; regulations on road traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 exam precautions: Candidates should dress appropriately—no slippers are allowed. Electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures displayed on the screen, and store personal belongings in lockers before entering the exam room. Upon entering, verify your identity at the assigned station, locate your seat, and begin the test. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After completion, queue to collect your score report and sign it—unsigned reports are considered invalid. There is no limit to the number of times you can reschedule Subject 1. Each subject can be taken once, with one retake allowed if you fail. If you do not attend the retake or fail it again, the current exam session ends, and you must reschedule. In contrast, Subject 2 and Subject 3 allow only five exam attempts, with rescheduling permitted after ten days. If you fail the Subject 3 safety and civilized driving knowledge test, your previously passed road driving skills test results remain valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safety and civilized driving knowledge tests. The safety and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official terminology (as per the Ministry of Public Security's Order No. 123) does not include the term "Subject 4."
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.