Which region does the license plate starting with 'Su' belong to?

2 Answers
DelilahLee
07/25/25 12:39am
License plates starting with the letter 'Su' belong to vehicles registered in Jiangsu Province. More details about license plates are as follows: 1. The Chinese character on the license plate represents the abbreviated administrative region of the province, municipality, or autonomous region where the vehicle is registered. For example, Beijing is abbreviated as 'Jing,' Zhejiang as 'Zhe,' and Jiangsu as 'Su.' 2. There are formal and temporary license plates. Temporary plates are made of paper and do not need to be fixed to the front or rear of the vehicle, but they must be affixed to the inside of the front and rear windshields. 3. Common colors for formal license plates include blue, yellow, and green. Most large buses and trucks use yellow plates, while most ordinary household vehicles use blue or green plates. Green plates are designated for new energy vehicles, which include pure electric vehicles and plug-in hybrid vehicles.
Was this review help?
3
4
Share
DeTeagan
08/10/25 3:50pm
I often drive around and am quite familiar with license plates from different regions. License plates starting with "Su" are the abbreviation for Jiangsu Province, which is quite common in China's license plate system. For example, when I see a plate starting with "SuA" on the highway, I know that vehicle is from Nanjing, Jiangsu; if it's "SuE", then it's from Suzhou. Jiangsu Province is geographically close to the coast, with a developed economy and dense population, so the chances of seeing such plates on the road are quite high. License plates across China have fixed codes, like "Jing" representing Beijing and "Hu" representing Shanghai, designed to make it easy to identify a vehicle's origin. Remembering this can help you quickly determine a vehicle's registration, such as guessing where a car is from while traveling, which is quite fun. As a driver, I've also found that knowing this information can help avoid some mishaps, like when checking surveillance footage after a traffic violation in certain areas, knowing the location can save you a headache.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

Is it acceptable to buy a car with a replaced radiator support frame?

If the radiator support frame is connected to the vehicle body frame with screws and can be detached, then replacing the radiator support frame has minimal impact. However, if the radiator support frame is integrated with the vehicle body frame, replacing it may have some consequences. Additional information: 1. Radiator introduction: The radiator support frame is a common trouble spot in the front of a vehicle and is also the most frequently impacted area in collisions. There are three types of radiator support frame materials on the market: plastic, iron, or alloy. Structurally, they can be divided into one-piece and split types. The one-piece type is the most common form on the market, and in some regions, the radiator support frame is also referred to as a "dragon gate frame." The split type is generally divided into three sections, connected via bolts or welding points. 2. Water-cooled engines: Cars use water-cooled engines, which rely on the continuous circulation of coolant to dissipate heat. Water-cooled engines have a radiator at the front of the vehicle, which is mounted on the radiator support frame. Most vehicles have detachable radiator support frames, while some vehicles have radiator support frames that are integrated with the vehicle body frame.
20
1
Share

Car Maintenance: By Time or Mileage?

Generally, car manufacturers recommend performing maintenance based on whichever comes first. Additional information: Functions of engine oil: 1. Lubrication and friction reduction: There is inevitable friction between parts, and engine oil helps reduce this friction. 2. Cooling: Engine oil carries heat back to the oil tank and then dissipates it into the air, assisting the radiator in cooling the engine. 3. Cleaning: Over time, engines accumulate impurities. High-quality engine oil can carry away these impurities as it circulates, flushing out contaminants. 4. Sealing and leak prevention: It blocks water and air, enhancing rust and corrosion resistance.
1
3
Share

What is the real fuel consumption of Nissan Teana?

Nissan Teana's combined fuel consumption is 5.9-6.7L/100km. There are currently 6 models of Nissan Teana on sale: the Fashion Edition, Comfort Edition, and Intelligent Navigation Edition, with a fuel consumption of 5.9L/100km. The Intelligent Edition and Intelligent Premium Navigation Edition have a fuel consumption of 6.6L/100km. The Intelligent Ultimate Navigation Edition has a fuel consumption of 6.7L/100km. The above figures are NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The real fuel consumption is higher than this value, ranging from 7.0-9.0L/100km. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle in advance when approaching red lights can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically produce more power, requiring more gasoline for combustion. Heavier vehicles also consume more fuel due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline is less likely to vaporize during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in cold temperatures, the engine's computer may control higher idle speeds to warm up the engine, further increasing fuel consumption.
17
0
Share

What are the classifications of buses?

Buses are classified into 4 categories: micro buses, light buses, medium buses, and large buses. The following is a detailed introduction to bus classifications: 1. Types: Traditional buses can be single-deck or double-deck; articulated or trailer-type. They may have two doors, a single door, or be equipped with a luggage compartment. Most buses are powered by diesel engines, though there are now pure electric models with all-metal bodies. In terms of energy consumption and road space per passenger, public transport vehicles are more economical than private vehicles, which is one of the main reasons many countries prioritize the development of public transport buses. 2. Status: Globally, car manufacturing and popularization are widespread, so the bus manufacturing industry, as the main body of public transport, demonstrates considerable maturity in both design concepts and technology. Europe leads the world in bus technology and research capabilities. China's bus industry holds an important position internationally in terms of design capability and manufacturing level.
13
5
Share

Why does the steering wheel shake when driving fast?

Here are the reasons why the steering wheel shakes when driving fast: 1. It is a manifestation of poor wheel dynamic balance. Go to the after-sales service for a dynamic balance check. 2. Check whether the front and rear shock-absorbing support rubber blocks of the engine and transmission are normal. Go to the after-sales service for inspection and repair. Additional information: 1. Dynamic balance: If the shaking occurs at 80-120 mph and disappears above or below this range, the four-wheel dynamic balance should be checked first. Possible causes include the detachment of tire balance weights, failure to perform dynamic balance after tire repair, or inaccurate measurements by dynamic balance machines in some small roadside shops. 2. Tires and rims: The deformation of tires and rims is usually caused by careless driving habits, such as driving too fast on rough roads, climbing curbs, or passing over speed bumps at high speeds, all of which can lead to this issue.
7
3
Share

Is the Transmission the Same as the Engine?

Transmission is not the engine. The transmission is the transmission, and the engine is the engine—they are two completely different machines. Engine cylinders can be single-cylinder, 3, 4, 6, 8, 12, or 24 cylinders, etc.; transmissions are divided into manual and automatic types. The car engine is the device that provides power to the vehicle, determining its performance, fuel efficiency, stability, and environmental impact. Depending on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems, among others. The transmission mainly refers to the vehicle's gearbox, which is divided into manual and automatic types. A manual transmission primarily consists of gears and shafts, achieving speed and torque variations through different gear combinations.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.