Which region does the license plate starting with 'Qing' belong to?

What brand is the Lingyue car?

It is a sedan under the Southeast Motors brand. Below are specific details about the Lingyue: 1. Dimensions: The car measures 4420mm*1700mm*1415mm, with a fuel consumption of 5.8L/100km, a wheelbase of 2.5 meters, and a trunk capacity of 420 liters. 2. Powertrain: The Lingyue is equipped with a Mitsubishi Technology 1.5L-MIVEC engine, featuring DOHC double overhead camshafts and a variable valve timing system. 3. Features: The Lingyue comes with four-wheel disc brakes (both front and rear), ABS+EBD, 2SRS, and power windows for all four doors.

15

3

Share

What causes the Land Rover Discovery Sport's air conditioning to stop blowing air?

Land Rover Discovery Sport's air conditioning may stop blowing air due to the following reasons: 1. Blower malfunction: The blower is the core component responsible for air circulation in the car's air conditioning system. If it is damaged, the air conditioning will inevitably stop blowing air. Possible causes of blower failure include overheating damage to internal coils or capacitor failure. 2. Blocked air ducts: Outside air passes through the cabin air filter before entering the vehicle, which can accumulate various airborne particles, leading to potential blockages. 3. Control system failure: If none of the above causes apply, the issue may lie with the control system. Possible culprits include malfunctioning air vents, control switches, or the vehicle's air conditioning computer.

5

Share

What does it mean when the ABS yellow light on the dashboard is on?

When the ABS light is displayed on the car, it indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, which poses a significant safety hazard. There are several states in which the ABS light may illuminate, with different causes and solutions for each state, as detailed below: State 1: ABS warning light stays on (most common). Cause 1: The ABS speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed or the wheel's slip rate, thus failing to issue appropriate commands to adjust braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the speed sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases and the voltage rises, the ABS light turns off. The ABS system's power supply voltage is too low, possibly due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and verify the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary. Check if the connector gap has widened; replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals. Incorrect tire or wheel rim specifications may also be the cause. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, and push the brake switch linkage down with a finger to its limit. Then release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary.

10

1

Share

Can the old license plate be transferred to a used car?

Can the old license plate be transferred to a used car? The following is detailed information about transferring the old license plate to a used car: 1. Conditions: After the license plate transfer, the old license plate must have been used for one year and can be applied for a new car or a used car under the original owner's name. If there is a vehicle transfer between spouses, the new owner must continue to use the license plate for one year before it can be retained. 2. Notes: For vehicle transfer, you need to bring the vehicle registration certificate and the vehicle must be present. Both parties should bring their ID cards. If the buyer is from another city and needs to register a local license plate, they must apply for a temporary residence certificate at the local police station.

5

2

Share

What are the symptoms of a suspension system failure in a Land Rover Range Rover?

Land Rover Range Rover suspension system failure exhibits the following symptoms: 1. Body vibration: When encountering bumpy roads, there is a strong sense of vibration, particularly up-and-down movement with noticeable body twisting. 2. Unusual noises from the body: Generally, the side where the suspension system has an issue will experience a sharp increase in wind noise, becoming unbearable. 3. Steering deviation: If the front wheel suspension system is faulty, the vehicle will pull to one side, requiring constant correction to maintain normal driving. Causes of suspension failure: This could be due to a malfunctioning compressed air pump or air leak in the pump's conduit; or it might result from damaged seals on the sleeve springs causing shock absorber oil leakage, leading to shock absorption failure.

10

4

Share

How to Remove Adhesive After Peeling Off Car Window Film?

Methods for removing adhesive after peeling off car window film: You can use essential balm, makeup remover, cleaning agents, etc., to eliminate residual adhesive. When peeling off the window film, you can first use a hair dryer to blow on the film. The film will deform due to heat, reducing its adhesion, making it easier to peel off slowly. You can also spray some adhesive remover between the glass and the film. After peeling it off, simply wipe with a towel. Window film is a PET functional film applied to the glass surface, serving purposes such as heat insulation, thermal insulation, UV blocking, anti-glare, decoration, privacy protection, and safety explosion-proofing. In summer, window film can block 45% to 85% of direct solar heat from entering the interior, while in winter, it can reduce heat loss by more than 30%.

19

2

Share

Which region does the license plate starting with 'Qing' belong to?

What brand is the Lingyue car?

What causes the Land Rover Discovery Sport's air conditioning to stop blowing air?

What does it mean when the ABS yellow light on the dashboard is on?

Can the old license plate be transferred to a used car?

What are the symptoms of a suspension system failure in a Land Rover Range Rover?

How to Remove Adhesive After Peeling Off Car Window Film?

Where is the daytime running light switch on the Baojun 510?

Where is the Tesla Referral Code?

Why is the Land Rover Freelander 2's one-button start not working?

How much horsepower does the Magotan have?