Which region does the license plate 'Shaan U' belong to?

1 Answers
VanLayla
07/29/25 8:41pm
Shaan U is the license plate for Xi'an, where 'Shaan' is the abbreviation for Shaanxi Province. The license plate codes in Shaanxi Province range from Shaan A to Shaan V, assigned as follows: Shaan A for Xi'an, Shaan B for Tongchuan, Shaan C for Baoji, Shaan D for Xianyang, Shaan E for Weinan, Shaan F for Hanzhong, Shaan G for Ankang, Shaan H for Shangluo, Shaan J for Yan'an, Shaan K for Yulin, and Shaan V for Yangling High-Tech Agricultural Demonstration Zone. Here is the classification of license plate colors: 1. Blue plates are for small vehicles. 2. Yellow plates are for large vehicles, agricultural vehicles, and training vehicles. 3. White plates are for special vehicles, such as military and police cars. 4. Black plates are for vehicles brought into the country by foreign individuals or enterprises. 5. Gradient green plates represent small new energy vehicles.
Was this review help?
19
3
Share
More Forum Discussions

New Energy Vehicle License Plate Registration Process?

The license plate registration process for new energy vehicles is as follows: 1. Bring the required documents: original and photocopy of ID card, non-local residents also need to submit the original and photocopy of the local "Residence Permit"; proof of origin for the non-motor vehicle (purchase invoice); electric vehicle sales (warranty) registration form (third copy); non-motor vehicle factory certificate; other certificates and documents required by the traffic management department of the public security authority. If the electric bicycle registration is handled by an agent, the agent's original ID and photocopy must also be submitted. 2. Fill out the form: The owner or agent should obtain the "Electric Bicycle Registration/Transfer/Cancellation Application Form", and under the guidance of the staff, fill in the detailed information as required and verify the certificate. 3. Vehicle inspection by the officer: Compare the brand model, frame number, motor number, and color of the electric bicycle with the certificate and proof of origin, and perform vehicle inspection including number tracing and weighing. 4. License plate issuance: If the inspection is passed, the officer will stamp and sign the number tracing section on the "Electric Bicycle Registration/Transfer/Cancellation Application Form", and the license plate can then be issued.
10
1
Share

New Energy Vehicle License Plate Registration Process and Details?

New Energy Vehicle License Plate Registration Process and Details are as follows: 1. Prepare required documents: Original and photocopy of ID card, non-local residents also need to submit original and photocopy of local "Residence Permit"; Proof of vehicle origin (purchase invoice); Electric vehicle sales (warranty) registration form (third copy); Non-motor vehicle factory certificate of conformity; Other certificates or documents required by the traffic management department of the public security organ. If the electric bicycle registration is handled by an agent, the original and photocopy of the agent's ID card must also be submitted. 2. Fill out forms: The vehicle owner or agent should obtain the "Electric Bicycle Registration/Transfer/Cancellation Application Form", and fill in detailed information as required under the guidance of staff, then verify the certificate of conformity. 3. Vehicle inspection by traffic police: Compare the brand model, frame number, motor number, color with the certificate of conformity and proof of origin, and perform vehicle inspection procedures such as rubbing the number and weighing. 4. License plate issuance: If the inspection is passed, the traffic police will stamp and sign on the rubbing number strip of the "Electric Bicycle Registration/Transfer/Cancellation Application Form", and the license plate can be issued.
16
2
Share

What is the engine model of the Buick Excelle?

The Buick Excelle uses the L2B engine model, with a maximum horsepower of 113 hp, a maximum power output of 83 KW, a maximum power speed of 6000 rpm, and a peak torque of 141 N.m. The Buick Excelle engine is produced at the Shanghai General Motors Yantai Dongyue base, incorporating German technology and is a domestically manufactured engine. For daily maintenance of the Buick Excelle engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When engine oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
7
0
Share

What does the ECON button on a car mean?

The ECON mode in a car's air conditioning system is actually an energy-saving mode for the air conditioner. The ECON function only takes effect when the air conditioner's cooling mode is activated. Since the air conditioning compressor is driven by the engine and can consume up to 20% of the engine's power, activating the ECON mode reduces the air conditioner's power consumption while maintaining its cooling effect, thereby saving fuel. Activating the air conditioner's economy mode is very simple. The driver only needs to turn on the air conditioner and press the "ECON" button to enable it. When the button's light is on, the cooling system is turned off, and only natural or warm air is provided. Here’s an introduction to the car air conditioner's ECON mode: Typically, the car air conditioner has an A/C symbol to indicate whether the air conditioner is on or off, while the ECON function only works when the cooling mode is activated, representing the air conditioner's economy mode. In this mode, the compressor still operates, but compared to the normal mode, the compressor's control point is raised. The compressor does not remain continuously engaged; instead, its start-stop cycle is controlled by the evaporator temperature. In normal mode, the compressor's start-stop point is between 2~4°C. In ECON mode, the start-stop point is raised to 8~10°C. The lower the temperature, the longer and harder the compressor works. By enabling the ECON mode, the engine's power output is conserved, leading to fuel savings. Functions of the car air conditioner: Uses a refrigerant's continuous phase-change cycle to achieve cooling; Removes dust, odors, smoke, and toxic gases from the car's interior, improving air quality and humidifying the cabin air to increase relative humidity; Uses the engine's coolant, waste heat, or a burner's combustion heat as a heating source. The heater warms the air, which is then blown into the cabin by a fan, raising the outlet air temperature for heating purposes; Draws in fresh outside air for ventilation and air exchange, also helping to prevent windshield fogging. Precautions for using the car air conditioner: Do not set the air conditioner temperature too low. A large temperature difference between the inside and outside of the car can easily cause the driver to catch a cold, and excessively low temperatures may also increase the risk of arthritis for passengers. Adjust the air vent direction. Based on the principle that cold air sinks and warm air rises, when using cooling, direct the vents upward, and when using heating, direct them downward. Do not turn on the air conditioner immediately after the car has been exposed to the sun. After prolonged sun exposure, the interior temperature becomes very high. First, open the windows to ventilate and allow the hot air to escape before turning on the air conditioner.
6
1
Share

What to Do If an Aluminum Cylinder Block Screw Strips?

You can place a rubber pad or double-sided tape on the stripped screw to increase friction at the stripped position. Then, use the corresponding screwdriver to remove the stripped screw.
9
1
Share

How to Switch Interfaces on the Magotan LCD Instrument Cluster?

You can directly switch interfaces using the buttons on the multifunction steering wheel. Alternatively, locate the menu button, then use the up and down keys to find the desired personalized settings, and finally select and press the confirm button.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.