Which region do license plates starting with 'Su' belong to?

How often should the transmission fluid be changed for the Mazda Atenza?

The transmission fluid for the Mazda Atenza should be changed every two years. When replacing the transmission fluid, the oil filter screen should also be replaced simultaneously, as it cannot be thoroughly cleaned and must be replaced. Transmission fluid is a lubricant that maintains the cleanliness of the gear system, providing lubrication to extend the lifespan of the transmission components. It offers effective lubrication even in low-temperature conditions and reduces fluid loss under harsh operating conditions. The Mazda Atenza has dimensions of 4870mm in length, 1840mm in width, and 1450mm in height, with a wheelbase of 2830mm. In terms of exterior design, this vehicle continues the design of the imported Atenza model, incorporating Mazda's KODO design philosophy. The U-shaped front grille, paired with LED headlights, enhances the sporty appearance.

9

5

Share

How to open the hood of a Kia K3?

Method to open the hood of a Kia K3: First, pull the hood release cable, at which point the hood will pop open slightly. At this stage, lifting the hood directly won't open it completely. There is a lever near the latch; move it to the left and then lift the hood smoothly. The Kia K3 has dimensions of 4600mm in length, 1780mm in width, and 1445mm in height, with a wheelbase of 2700mm. In terms of power, this vehicle is equipped with two engines: a 1.5-liter naturally aspirated engine and a 1.4-liter turbocharged engine. The 1.5-liter naturally aspirated engine has a maximum power output at 6300 rpm and maximum torque at 4500 rpm. The 1.4-liter turbocharged engine delivers maximum power at 5500 rpm and maximum torque between 1400 to 3700 rpm.

3

2

Share

What is the Accent car?

Accent is an economical family sedan launched by Beijing Hyundai on March 16, 2006. Here are some extended details: 1. The Accent comes in seven colors: Noble White, Champagne Silver, Lemon Yellow, Urban Red, Flash Silver, Sky Blue, and Charming Blue. 2. The Accent is an economical model tailored for a 'frugal well-off society,' redefining populism in terms of exterior dimensions, power, safety, and comfort under this concept. 3. The interior space of the Accent exceeds expectations. Even with two passengers in the front seats, rear passengers do not feel cramped, with ample legroom and headroom. Folding down one side of the rear seat significantly extends the trunk space, providing sufficient storage for a family of three on road trips.

10

1

Share

What are the dimensions of the Geely Xingyue?

Geely Xingyue dimensions are 4605mm in length, 1878mm in width, and 1643mm in height, with a wheelbase of 2700mm. In terms of exterior design, the coupe-style roofline is the main feature of the Geely Xingyue, complemented by black window trim. Additionally, the new model features silver high-gloss side skirts and red brake calipers, enhancing its sporty appearance. The rear is adorned with chrome accents. In terms of configuration, the vehicle is equipped with a series of intelligent safety features including ICC Intelligent Navigation, APA Full-Automatic Intelligent Parking, AEB City Pre-Collision Safety, and LKA Lane Keeping System. It also comes with the Bosch 9.3 ESP system and is densely surrounded by 22 top-tier industry sensors, achieving Level 2 autonomous driving capability.

14

1

Share

What Causes the Rear Wheel to Make a Rumbling Noise on Bumpy Roads?

When a car makes a "rumbling" noise during continuous bumps, it is highly likely due to the lower control arm ball joint. The grease inside the lower control arm ball joint may dry out, leading to internal wear and the creation of gaps, which ultimately results in driving noise. Below is more information about the functions of the lower control arm ball joint:1. Buffering and vibration damping. 2. Transmitting torque. 3. Maintaining vehicle stability, improving comfort and safety performance. 4. Guiding role. It works with the suspension system to adjust camber and toe-in, allowing the vehicle to achieve certain steering angles. 5. Enhancing tire grip for better handling, providing the driver with a superior control experience. 6. Bearing and transmitting loads from various directions, mitigating impacts or changes in vehicle position caused by braking, road conditions (uneven surfaces), acceleration, or steering.

10

4

Share

What does it mean when the SVS light on the dashboard is on?

The SVS light on the dashboard indicates that the engine control unit has detected an error signal from a sensor or that the sensor has exceeded its operational standards. When the ignition is turned on, the SVS indicator light will illuminate for an automatic check and then turn off after a few seconds. More detailed information is as follows: 1. If the SVS light is on, you can try to start the engine. If the engine fails to start, it might be due to an abnormal fuel pump that cannot supply fuel properly to the engine. If the engine starts, it could be a fault with another sensor. In this case, the car may still be drivable, but the issue could affect normal vehicle operation, such as increased fuel consumption or body vibrations. 2. If the SVS light is accompanied by signs like increased combustion chamber temperature or the oil pressure warning light, continuing to drive may lead to accelerated engine wear and early engine damage.

15

0

Share

Which region do license plates starting with 'Su' belong to?

How often should the transmission fluid be changed for the Mazda Atenza?

How to open the hood of a Kia K3?

What is the Accent car?

What are the dimensions of the Geely Xingyue?

What Causes the Rear Wheel to Make a Rumbling Noise on Bumpy Roads?

What does it mean when the SVS light on the dashboard is on?

What Does the Second Maintenance of a Car Include?

What engine does the Changan CS35 use?

Can a Car That Uses 95 Octane Fuel Use 92 Octane Fuel?

What are the differences between Tesla charging piles with European standards and Chinese standards?