Which province does the 'Pu' license plate belong to?

1 Answers
AlanaMarie
07/29/25 5:12pm
Currently, there are no license plates that start with 'Pu'. There are license plates that start with 'Jin', which belong to Shanxi Province. The license plate codes for various regions in Shanxi Province are as follows: Jin A represents Taiyuan City, Jin B represents Datong City, Jin C represents Yangquan City, Jin D represents Changzhi City, Jin E represents Jincheng City, Jin F represents Shuozhou City, Jin H represents Xinzhou City, Jin J represents Luliang City, Jin K represents Jinzhong City, Jin L represents Linfen City, and Jin M represents Yuncheng City. A license plate is the abbreviation for a vehicle license plate and a vehicle driving license. It is a standardized and uniform hard number plate with a registration code, issued by the vehicle management authority after reviewing, inspecting, and registering the vehicle that has applied for the license plate, as stipulated by national vehicle management regulations.
Was this review help?
13
3
Share
More Forum Discussions

What causes the exclamation mark on the Hyundai Mistra's reversing radar?

There are five possible scenarios when an exclamation mark appears on the car's dashboard: general malfunction, automatic transmission failure, brake system failure, abnormal tire pressure, and lighting malfunction. Below is a detailed analysis of these five situations: General malfunction: A triangle with an exclamation mark inside indicates a general performance or component malfunction in the car. This could include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the problem. Automatic transmission failure: A yellow gear with an exclamation mark inside is the automatic transmission failure warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. Transmission oil should be replaced promptly. Brake system failure: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, primarily indicating brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Abnormal tire pressure: A horizontal line under parentheses with an exclamation mark in the middle represents the tire pressure monitoring warning light. This light will illuminate when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting malfunction: A yellow bulb with an exclamation mark is the lighting malfunction indicator, signaling a fault in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
5
1
Share

What are the differences between Porsche 718 and 911?

The differences between Porsche 718 and 911 are as follows: 1. Luggage compartment location: 1. Porsche 718: It has both front and rear luggage compartments. 2. Porsche 911: The luggage compartment is located at the front of the car. 2. Power aspects: 1. Porsche 718: Equipped with 2.0T and 2.5T engines, achieving 0-100 km/h acceleration in 5.6 seconds and 4.4 seconds respectively, with power outputs of 250 horsepower and 350 horsepower. 2. Porsche 911: The Porsche 911 series is divided into Carrera series, Targa series, Turbo series, Turbo-S series, and GT series, equipped with 3.0T, 3.8T, and 4.0L engines, achieving 0-100 km/h acceleration in 3.2 seconds.
2
5
Share

What is the difference between Toyota A25A and A25C engines?

Toyota A25A and A25C engines have the following differences: 1. Version difference A25A represents Toyota's TNGA 2.5L engine, which is imported from Japan; the A25C engine is the domestically produced version. 2. Assembly difference A25A is imported as a complete engine assembly from Japan, fully assembled there before shipment; A25C involves importing all necessary engine parts from Japan, with assembly taking place at GAC Group's factory. Advantages of these two engines: Both A25A and A25C engines feature new technology that allows free switching between Otto cycle and Atkinson cycle systems, giving this internal combustion engine a compression ratio of (13:1). In terms of new technology and power performance, the 2.5L engine delivers 151KW (205 horsepower) with 240nM torque, providing strong and dynamic power for the new vehicle.
15
1
Share

What is the actual fuel consumption of the Eado Blue Whale Edition 1.4t?

The actual fuel consumption of the Changan Eado Blue Whale Edition is 9.7L/100km. Reasons for increased vehicle fuel consumption: 1. Insufficient tire pressure and tire wear: Insufficient or low tire pressure increases friction between the tires and the ground, leading to greater resistance and higher fuel consumption. Severe tire wear often causes slippage, which also increases fuel consumption. 2. Poor gasoline quality: Pay attention to fuel quality and regularly clean carbon deposits. Poor-quality gasoline can lead to increased carbon buildup, which roughens the intake pipe walls, affecting air intake efficiency and mixture quality, causing a sharp rise in fuel consumption. Therefore, fuel quality should not be overlooked, and cleaning carbon deposits every six months is essential.
10
0
Share

What are the gear positions for Kia automatic transmission vehicles?

There are P, R, N, D, S, and M gears. The detailed introduction to the gear positions of Kia automatic transmission vehicles is as follows: 1. P (Parking) Gear: The P gear is the parking gear, used when the vehicle is parked for a long time. It uses the mechanical device inside the transmission to lock the rotating part of the car, preventing the vehicle from moving. 2. R (Reverse) Gear: The R gear is also called the reverse gear, used when the vehicle needs to move backward. When the gear lever is in the R position, the reverse hydraulic circuit is engaged, causing the drive wheels to rotate in reverse, enabling the vehicle to move backward. 3. N (Neutral) Gear: The N gear is the neutral gear, used when the vehicle is parked for a short time without turning off the engine. 4. D (Drive) Gear: The D gear is also called the drive gear. When the gear lever is in the D position, the vehicle will automatically shift gears based on the throttle opening and speed data. 5. S (Sport) Gear: S stands for Sport mode. Nowadays, the S gear generally refers to the sport mode, which, as the name suggests, makes the vehicle drive more sportily. When the gear lever is shifted to the S gear, the throttle response becomes faster, the engine speed is maintained in a higher range, and the shifting timing is delayed, keeping the vehicle in a high-power output state, increasing driving pleasure. Of course, fuel consumption will also increase significantly. 6. M (Manual) Gear: The M gear refers to the manual mode of an automatic transmission or the simulated manual mode of a CVT transmission. When the gear lever is shifted to the M gear, gear shifting is done manually by the driver. Near the M gear, there are "+" or "-" symbols, where "+" represents upshifting and "-" represents downshifting, or gear shifting can be done via paddle shifters on the steering wheel. The purpose of the M gear is to increase driving pleasure and make driving the vehicle more flexible.
10
3
Share

What is the oil model and specification for Hyundai Mistra?

The oil model for Hyundai Mistra is 5W-30 synthetic oil, with a replacement capacity of 5L and a replacement interval of 5,000 kilometers. For later maintenance oil changes, you can choose brands such as Mobil, Shell, Castrol, or Total. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as providing better lubrication performance under high-temperature conditions. The method for changing the oil in a Hyundai Mistra is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new oil through the oil filler cap on the engine valve cover, usually filling up to three-quarters of the oil bottle; Start the engine and let it run for 5 minutes, then check for any oil leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the oil dipstick to check if the engine oil level is within the standard range.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.