Which province does the license plate 'Yu' belong to?

Is it necessary to clean the fuel injectors?

It is necessary to clean the fuel injectors. If they are not cleaned for a long time, it may lead to phenomena such as accelerated engine wear, unstable idling, increased fuel consumption, weak acceleration, and difficulty in starting. The interval for cleaning the fuel injectors should be determined based on the owner's daily driving environment and fuel quality. Generally, the fuel system should be cleaned every 30,000 to 40,000 kilometers. The fuel injector itself is a normally closed valve. When the electromagnetic coil is energized, it generates suction, lifting the needle valve to open the injection hole. Fuel is sprayed out at high speed through the annular gap between the needle valve head and the injection hole, forming a mist, which is conducive to full combustion.

8

2

Share

How to Distinguish Between Full Synthetic and Semi-Synthetic Engine Oil?

Differences between full synthetic and semi-synthetic engine oil: 1. Different base oils: Full synthetic oil is a blend of Group III, IV, and V base oils; semi-synthetic oil uses Group III base oil. 2. Different replacement intervals: Full synthetic oil should be replaced once a year or every 10,000 kilometers during use; semi-synthetic oil should be replaced every six months or every 7,500 kilometers. 3. Different temperature suitability: Full synthetic oil has a wider operating temperature range; semi-synthetic oil has relatively higher usage requirements. Mineral oil typically has a darker color, while synthetic oil is lighter, appearing as a transparent light yellow. Products labeled "Full Synthetic" are fully synthetic oils—identification should not rely solely on viscosity grades. Generally, oil bottles will clearly indicate whether the product is full synthetic, semi-synthetic, or mineral oil.

15

5

Share

What Causes Excessive Carbon Monoxide in Car Exhaust?

The reasons why the headlights of a Lavida do not work are: 1. The battery is severely depleted; 2. The wires overheat, increasing the circuit resistance and reducing the headlight intensity. In severe cases, the headlight circuit may short-circuit due to the insulation layer melting, potentially leading to burnt wires or even a car fire; 3. The contacts in the circuit, such as those in the light relay or combination switch, become corroded or stuck, preventing the circuit from opening or closing; 4. The fuse in the headlight circuit blows, plunging the front of the car into darkness; 5. When too many electrical devices are used or the generator is overloaded for an extended period, the generator's diodes and coils may burn out, causing the generator to stop producing electricity.

15

5

Share

Why does the newly replaced brake pads feel ineffective?

Just replaced brake pads may feel ineffective because: the surface of new brake pads is relatively flat, resulting in a smaller contact area with the brake disc, which leads to reduced braking force. All new brake pads require a break-in period, typically around 200 kilometers. Only after this break-in period can optimal braking performance be achieved. Brake pads, also known as brake linings, are crucial safety components in a vehicle's braking system. They play a decisive role in braking effectiveness. Brake pads generally consist of a steel plate, adhesive heat insulation layer, and friction material. The steel plate undergoes anti-rust coating, with the coating process monitored by SMT4 furnace temperature tracking instruments to ensure proper temperature distribution and quality control.

3

0

Share

What are the requirements for installing dynamic reversing trajectory?

Dynamic reversing trajectory installation requirements: Self-installed reversing cameras can only achieve static trajectories. Dynamic trajectories require data collection of steering wheel angles, which necessitates signals from the CAN bus or an angle sensor. Dynamic trajectory lines: These change with the rotation of the steering wheel, indicating the area the rear of the car will pass through when reversing in the current wheel direction. The trajectory lines adjust according to the wheel direction; when the wheels are straight, the trajectory lines align with the positioning area. When the driver operates the car in reverse, the intelligent trajectory reversing system displays two reversing guide lines on the DVD reversing camera, representing the movement path of the rear wheels. As the steering wheel turns, the reversing trajectory lines rotate accordingly, accurately planning the reversing path.

5

0

Share

What to Do When the Car Fan Stops Working?

The methods to address a non-functioning car fan are: 1. Check if the water temperature has reached the required level. If the water temperature fails to rise, the car engine needs to be inspected; 2. Examine the relay for any faults. If it is damaged, it is recommended to replace the faulty relay; 3. Inspect the thermostat switch. If there is an issue, the damaged thermostat switch should be replaced promptly. The function of the car fan is to increase the airflow through the radiator core, enhancing the cooling effect and accelerating water cooling. The fans used in car engines are categorized by their structural principles into axial flow fans and centrifugal fans; and by their driving methods into mechanically driven and electrically driven types.

17

4

Share

Which province does the license plate 'Yu' belong to?

Is it necessary to clean the fuel injectors?

How to Distinguish Between Full Synthetic and Semi-Synthetic Engine Oil?

What Causes Excessive Carbon Monoxide in Car Exhaust?

Why does the newly replaced brake pads feel ineffective?

What are the requirements for installing dynamic reversing trajectory?

What to Do When the Car Fan Stops Working?

What is the tire size of the Changan CS55?

How to reset the maintenance light on the Changan CS75?

How to Confirm Vehicle Distance Using Rearview Mirrors?

How to Check the Production Date of a Car Engine?