Which Pedal is the Brake and Which is the Clutch in a Car?

2 Answers
DeGabriella
07/24/25 1:39pm
In a manual transmission car, there are three pedals: the leftmost is the clutch, the middle one is the brake, and the rightmost is the accelerator. Here are specific introductions about the brake and clutch: 1. Brake: The car's brake pedal is located below the steering wheel. Pressing the brake pedal causes the brake lever to engage, applying pressure that is transmitted to the brake pads on the brake drum, which then clamp the brake disc, slowing or stopping the car. 2. Clutch: The clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission.
Was this review help?
5
5
Share
MaliaMarie
08/11/25 7:39am
I've been driving for over twenty years. The brake is the pedal you press with your right foot, used to slow down or come to a complete stop, especially at red lights or in emergencies. It works through a hydraulic system to slow the wheels and prevent accidents. Brake pads are crucial components that need regular inspection and replacement; otherwise, excessive wear can lead to failure. The clutch, found in manual transmission cars, is operated with the left foot. It connects or disconnects the engine's power from the transmission, such as when shifting gears or starting the car—press it down and release it slowly for smooth movement. Remember, in rain or snow, brake gently and early to avoid skidding, and don't keep the clutch partially engaged for too long to prevent overheating and damage. For safety, I always have the mechanic check the brake fluid and clutch flexibility during every maintenance service.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

Does the Kia Pegas have a hatchback version?

Kia Pegas does not have a hatchback version. Here are the relevant details: Introduction to Kia Pegas: The Kia Pegas is a compact sedan with body dimensions of 4300mm in length, 1700mm in width, and 1460mm in height, with a wheelbase of 2570mm. In terms of power, the Pegas is equipped with a 1.4L naturally aspirated engine across all variants, paired with either a 5-speed manual transmission or a 4-speed automatic AT transmission. The engine features DCVVT technology, delivering a maximum power output of 95 horsepower and a peak torque of 132 Nm at 4000 rpm. For configuration, the car comes with safety features such as airbags, rear parking sensors, safety controls, and an external sunroof. Kia Hatchback Models: Kia offers three hatchback models: the K2 Hatchback, the Cerato Eurostyle, and the imported Carens.
18
4
Share

What Causes Loud Engine Noise in Cars?

Loud engine noise in cars may be caused by aging engine mounts. With high mileage, the engine mounts can deteriorate, and replacing them can solve the problem. Carbon buildup can also lead to increased engine noise. If the engine sounds normal when heard from outside but feels excessively noisy inside the car, it indicates poor sound insulation. In this case, the vehicle's sealing strips should be checked for signs of aging. If the engine produces a dull, thumping sound during operation, it might be due to issues with the cylinder valves. This sound often disappears when driving at high speeds, which strongly suggests a problem with the cylinder valves. Additionally, oil pressure should be checked to rule out any related issues.
20
2
Share

What does a faucet-like symbol on the car mean?

A faucet-like symbol on the car is the engine malfunction indicator light. If this light illuminates while driving, it may indicate that the engine is experiencing poor combustion conditions, engine knocking, poor fuel quality, dirty engine cylinders with carbon deposits, or unavailable computer data. The engine status indicator light: it turns on when the ignition is switched on and should go off after about 3 to 4 seconds. If it does not light up or does not turn off, it indicates an engine fault that requires immediate repair. When a malfunction indicator light on the car's instrument cluster illuminates, it means that the component represented by that light has an abnormality or fault. However, the exact cause of the fault cannot be determined without a professional diagnostic tool, so it's necessary to visit a 4S shop for a professional diagnosis.
7
5
Share

What are the correct steps for starting and parking an automatic transmission car?

The correct steps for starting an automatic transmission car are: 1. Press the brake and shift to N gear, then start the car; 2. Shift from N gear to D gear; 3. Release the handbrake, then lift your foot off the brake pedal to start moving. The steps for parking are: 1. When parking, first press the brake, then firmly pull the handbrake; 2. Shift the gear to P; 3. Slowly release the brake pedal and then turn off the engine. Explanation of automatic transmission gears: P stands for Parking gear, also used when starting; R stands for Reverse gear; N stands for Neutral gear; D stands for Drive gear, also known as the driving gear; L stands for Low gear; S stands for Sport mode, when shifted into this gear, the gear can be freely switched; OD stands for Overdrive gear, used during high-speed driving.
18
1
Share

What Causes the ETC Light to Illuminate?

ETC light illumination can be attributed to: 1. Malfunction of the vehicle's computer; 2. Depleted battery in the odometer, requiring replacement; 3. Aged fuses in the fuse box, necessitating a new fuse. When the ETC light is on, it is crucial to inspect the sensors in various parts of the vehicle for proper functionality. A diagnostic tool can be used to check for fault codes, often pointing to components such as the throttle body, spark plugs, or exhaust gas valve. ETC is an abbreviation that typically stands for three terms: Electronic Throttle Control, Electronic Temperature Control, or Traction Control System. Vehicle fault indicator lights are categorized into fault warning lights and reminder indicator lights. Fault warning lights are red, indicating a severe malfunction or critical warning that requires immediate attention. Reminder indicator lights are yellow, signaling issues that, while not urgent, should not be ignored as they indicate existing problems.
12
2
Share

What brand is the Beijing Hyundai Elantra's transmission?

Beijing Hyundai Elantra's transmission brand is Aisin Warner 6AT from Japan. Here are the relevant details: Introduction to Hyundai Elantra's transmission: The transmission of Beijing Hyundai Elantra is Aisin Warner 6AT from Japan, offering two engine options: 1.6L and 1.4T. However, the main focus is on the 1.6L naturally aspirated engine, with a power output of 95.3kw and torque of 157nm. Function of the transmission: It changes the gear ratio between the engine and the wheels, allowing the engine to operate under optimal conditions. It expands the torque and speed transmitted from the engine to the driving wheels, achieving different speeds. It enables the car to reverse and also provides a neutral gear setting.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.