Which parts of the car air conditioning need to be cleaned?

1 Answers
DeIker
07/30/25 9:06am
Car air conditioning parts that require cleaning include: air intake ducts, air conditioning filter, air vents, fan blades, and evaporator. The benefits of cleaning car air conditioning are: 1. Enhanced cooling performance, as the cleaned system is free of dust and debris, allowing smooth airflow exchange; 2. Improved health by purifying cabin air and eliminating odors produced by the air conditioning; 3. Extended service life of the air conditioning system; 4. Reduced power consumption and improved operational efficiency. Car air conditioning regulates and controls the temperature, humidity, air cleanliness, and airflow within the vehicle cabin to provide a comfortable environment for passengers, reduce travel fatigue, create better working conditions for the driver, and serve as a crucial ventilation device for ensuring safe driving.
Was this review help?
19
4
Share
More Forum Discussions

Does the new Sylphy have a rear anti-collision beam?

The new Sylphy is equipped with front and rear anti-collision beams to enhance driving safety. The anti-collision beams are made of aluminum alloy, with a thickness comparable to that of general compact cars. The exterior of the anti-collision beams is wrapped with foam, primarily to provide support to the external plastic bumper in collisions below 4 km/h. Below is an introduction to the anti-collision beams: 1. The working principle of the anti-collision beam is that when the vehicle is traveling at medium to high speeds and hits an obstacle, the front anti-collision beam distributes the impact energy to the energy-absorbing boxes. At this point, the energy-absorbing boxes are immediately damaged, dispersing the remaining energy to the two longitudinal beams. The longitudinal beams then distribute the impact energy backward to the entire vehicle body, allowing the entire body structure to absorb the energy and reduce the force experienced by the occupants. 2. The anti-collision beam is not as formidable as its name suggests; the extent of its protective effect is highly dependent on the vehicle speed. In collisions at speeds of 10 km/h, the impact force is transmitted to the energy-absorbing boxes on both sides, which act as buffers for the anti-collision beam. Therefore, the anti-collision beams of most vehicle models can perform effectively under such conditions. When the speed reaches 40 km/h, the anti-collision beam plays a role in protecting the occupants by directly distributing the impact force to the two longitudinal beams of the vehicle body. This allows the overall rigidity of the body to share the impact force, reducing the force experienced by the occupants and thereby protecting them.
12
3
Share

Should I buy an Audi A4L with four-wheel drive?

It mainly depends on the driving environment. In areas with frequent rain or snow, choosing four-wheel drive is necessary for driving safety and to avoid skidding. Here is more information about the Audi A4L: Introduction: The Audi A4L is a model officially released by Audi on November 16, 2008. The new Audi A4L features a completely new exterior and chassis design, with the front and rear resembling the Audi A5. Advantages: Key advantages: Stylish and dynamic exterior with smooth lines; exquisite interior craftsmanship and good configuration; excellent sound system; spacious and practical interior with good comfort; a classic brand.
13
0
Share

What is the difference between the Mustang Shelby and the Mustang?

Ford Mustang Shelby is an upgraded version of the pure Ford lineage Mustang, with Shelby being a modified version based on the Mustang. Below are the differences between the Ford Mustang and the Mustang Shelby: Exterior: The Shelby is not a typical Mustang. The famous cobra emblem rises in the middle of the upper intake, replacing the small galloping horse emblem found on other Mustang models. Additionally, the angled headlight openings on both sides of the Shelby give the front end a more stunning appearance. Interior: In the Shelby, the speedometer and tachometer have swapped positions to allow performance-oriented drivers to better observe shift points during gear changes. The Shelby also features added lateral support in the front seats to keep the driver in the optimal position during turns. Performance: The Shelby's engine uses a cast-iron block and borrows the four-valve aluminum cylinder heads, piston rings, and bearings from the Ford GT project, giving the powertrain a high level of performance durability. Both the Shelby and the Mustang use a 2.3T turbocharged engine, but the Mustang produces a maximum horsepower of 299 hp and 434 Nm of torque, with a maximum power RPM of 5,600 and a maximum torque RPM of 3,000. After modifying the ECU program, the Shelby's maximum horsepower increases to 338 hp and 525 Nm of torque. The Shelby's engine delivers more horsepower than the Mustang.
20
0
Share

What are the symptoms of a faulty steering gear in a truck?

Truck steering gear failure symptoms include oil leakage, sticking, failure to return to position, abnormal noises, floating sensation, and heaviness. Here are some details about truck steering gears: Causes: It's relatively easy to determine the specific damage. When steering issues occur, you can use a jack to lift the two front wheels. If there's no change, the problem lies with the steering gear. Symptoms: Symptoms include loud noises during steering, jerking sensation in the steering wheel, increased steering wheel heaviness, and inaccurate steering direction. Steering pumps mainly include vane type, gear type, plunger vane type, gear type, and other variants.
7
4
Share

Which country does the Fengguang ix7 engine come from?

Fengguang ix7 engine is independently developed by Dongfeng Fengguang and is a domestically produced engine. The engine model used in the Fengguang ix7 is HD20, with a maximum horsepower of 231 hp, a maximum power of 170 kW, a maximum power speed of 5500 rpm, and a peak torque of 355 N·m. For daily maintenance of the Fengguang ix7 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD-SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB-CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid faults, oil should be changed regularly based on usage conditions, and the oil level should be moderate; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and still carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate out, blocking filters and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
18
2
Share

How to Alleviate Oil Burning in Volkswagen Cars?

Volkswagen cars can adopt methods such as changing the engine oil, cleaning the engine, and cleaning the oil circuit to alleviate the condition of oil burning. Below are measures to prevent oil burning: Use high-quality engine oil: Engine oil is highly susceptible to corrosion and aging under prolonged high temperatures, leading to thinning of the oil film, making it easier to enter the combustion chamber and participate in combustion. Using high-quality engine oil can significantly delay the occurrence of oil burning. Pay attention to the cleanliness of the fuel circuit: During the combustion process, fuel produces carbon deposits, which are the root cause of some car problems. Issues such as aging valve oil seals and increased gaps between piston cylinder walls are directly or indirectly related to the formation of carbon deposits. Therefore, maintaining the cleanliness of the fuel circuit is very helpful in preventing oil burning. External assistance: Use fuel additives to achieve a solution for oil burning without disassembly or repair.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.