Which parts of a car need carbon deposit cleaning?

1 Answers
VanAlexandra
07/30/25 5:07am
Parts of a car that require carbon deposit cleaning include: 1. Engine combustion chamber; 2. Intake manifold; 3. Fuel injector; 4. Throttle body; 5. Spark plug; 6. Three-way catalytic converter. Carbon deposits are coke-like substances formed from unsaturated olefins and gums in fuel under high temperatures during engine operation. Methods for cleaning carbon deposits are: 1. Open the engine oil cap, pour in cleaner, close the cap, then idle the engine for about 10 minutes before shutting it off; 2. Remove the engine cover, detach the throttle body and clean it with carburetor cleaner; 3. Pour intake system cleaner into the reservoir of a cleaning device, connect it to the intake system, then start the vehicle to allow vacuum pressure to draw the cleaner into the intake passages.
Was this review help?
12
4
Share
More Forum Discussions

Is it allowed to reverse during a U-turn?

It is permissible to reverse during a U-turn. Scenarios for reversing during a U-turn: When a motor vehicle is making a U-turn at an intersection and encounters insufficient space, it is allowed to reverse to complete the turn. During the U-turn, drivers must pay attention to oncoming vehicles and yield promptly to avoid unnecessary traffic accidents. Precautions for vehicle U-turns: Be mindful of vehicles approaching from both the front and rear, yield promptly, and complete the U-turn swiftly. U-turns should only be performed in designated areas where they are permitted; otherwise, it constitutes a traffic violation. Aim to complete the U-turn in a single maneuver whenever possible.
5
4
Share

What are the maintenance items for Honda 190?

There are many maintenance items for Honda 190. Components that need to be replaced: Replace engine oil, oil filter, fuel filter, and air filter. At the same time, check whether the coolant level meets the specified requirements, inspect the brake and clutch fluid levels, verify that the power steering fluid reservoir level complies with regulations, and examine all system oil pipe interfaces for any signs of leakage. Battery, belts, tires, and exhaust inspection: Check the battery fluid level and windshield washer fluid reservoir level. Inspect the tension and aging condition of the generator, air conditioning, water pump, and power steering pump belts. Verify the completeness of front and rear vehicle lights. Examine tire pressure and wear condition, tighten tire bolts to the specified torque, and replenish tire pressure to the vehicle's specified value. Perform tire rotation based on wear condition, and check whether the vehicle's exhaust emissions meet standards.
7
1
Share

Can I Turn Left When the Left Turn Signal is On in a Straight Lane?

You cannot turn left when the left turn signal is on in a straight lane. Turning left from a straight lane is a traffic violation: Turning left from a straight lane is a traffic violation that results in a 2-point deduction. According to the Road Traffic Safety Law, this behavior constitutes driving a motor vehicle without following the designated lane markings and will result in a 2-point deduction and a fine of 100 yuan. Article 51, Section 2, Chapter 4 of the Road Traffic Safety Law of the People's Republic of China states: At intersections with lane indication signs and directional lanes, vehicles must follow the designated lanes in advance based on the direction of travel. Motor vehicle signal lights indicate: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle signal lights or pedestrian crossing signal lights, non-motor vehicles and pedestrians must follow the indications of the motor vehicle signal lights.
20
4
Share

What are the four colors of the Tianlong flagship called?

The colors of the Tianlong flagship include China Red, Pearl Molybdenum Red, Blue, Green, and Black. Battery Capacity: The Dongfeng Tianlong pure electric heavy truck does not differ much in appearance from the regular Tianlong flagship model, except that the fuel tanks on both sides and various equipment have been replaced with batteries. The Dongfeng Tianlong flagship pure electric tractor is equipped with a total of 10 battery packs, but the current battery capacity is unknown. Range: The range affects the vehicle's working mode. Based on current battery technology, pure electric heavy trucks still face certain challenges in long-haul transportation. Perhaps short-distance operations like port drayage and other short-haul transportation are more suitable for this vehicle.
7
1
Share

What is the correct start-stop sequence for keyless ignition?

When using keyless ignition, you need to press the foot brake and press the start-stop button to ignite the car. Introduction to the keyless ignition system: The keyless ignition system allows you to start the vehicle without inserting or turning a key. As long as the smart key is inside the car, pressing the START button can directly ignite or turn off the engine. The keyless ignition system is a more advanced configuration than the keyless entry system. Vehicles equipped with the keyless ignition system also have the keyless entry system, but vehicles with the keyless entry system may not necessarily have the keyless ignition system. Keyless ignition steps: First, after the driver sits in the driver's seat, without pressing the brake, press the start button once—the ACC light will turn on. Next, the driver presses the brake and presses the one-touch start button to ignite the engine. Then, release the foot brake; you can choose to warm up the car in place. Press the foot brake again, shift into D gear, release the handbrake, and finally, slowly release the foot brake while gently pressing the accelerator to complete the start.
7
5
Share

What is Vehicle Inspection?

Vehicle inspection is essentially a safety check-up for your car. The purpose of vehicle inspection: The primary goal of vehicle inspection is to promptly identify and eliminate potential safety hazards, encourage and enhance vehicle maintenance, and ultimately reduce the occurrence of traffic accidents. What vehicle inspection covers: It involves checking whether the engine, chassis, body, and their accessories are clean, complete, and functional, and whether the paint finish is uniform and aesthetically pleasing; testing if the vehicle's braking system, steering control, lights, exhaust, and other safety features meet the technical requirements for safe operation; verifying if the vehicle has undergone modifications or alterations, and whether the registration details on the license, vehicle license, and vehicle records match the current condition of the vehicle, including any changes and whether approval and modification procedures have been completed; and inspecting the condition of the license plate, vehicle license, and the enlarged license plate print on the vehicle for any damage, tampering, or unclear characters that may require replacement.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.