Which Parts of a Car Can Be Modified?

What Happens When the Injection Nozzle Pressure of a Diesel Vehicle is Insufficient?

Insufficient injection nozzle pressure in a diesel vehicle can cause the internal needle valve to fail to close tightly. Here are additional details: 1. Causes of low injection pressure: Excessive clearance between the needle valve guide and the needle valve body or poor sealing of the needle valve cone surface; poor sealing between the injection nozzle and the injector body contact surface; loose adjusting screw; insufficient or broken pressure regulating spring. If the injection pressure is too high or too low, the injector should be disassembled, cleaned, and undergo corresponding adjustments and repairs. 2. Hazards of low injection pressure: If the pressure is set too low, the atomization quality of the fuel will significantly decrease, diesel consumption will increase, and the diesel engine will be difficult to start. Even if it starts, incomplete combustion in the diesel engine will cause continuous black smoke from the exhaust pipe, and carbon deposits will easily form on the injection nozzle needle valve. If the injection pressure is set too high, it can cause knocking sounds during diesel engine operation, reduce power output, accelerate wear on the injection pump plunger assembly and injector, and sometimes even rupture the high-pressure pipe.

12

3

Share

How Far Can You Drive on the Last Fuel Gauge Bar?

When the fuel gauge shows only one bar left, the car can typically travel approximately 40-60 kilometers, though the exact distance depends on the vehicle model and other factors. Driving with one bar of fuel left does not harm the car: When only one bar of fuel remains, the yellow fuel warning light illuminates as a cautionary signal, primarily to alert the driver that it's time to refuel. While low fuel levels could potentially damage the fuel pump, having one bar left still ensures the fuel pump remains adequately cooled, preventing any harm to the vehicle. Refueling recommendation: It is advisable to refuel as soon as the yellow warning light comes on, rather than waiting until the fuel gauge turns red. A red fuel light indicates that the fuel level has dropped below the fuel pump, which can cause damage. Therefore, even though the car can still operate with the yellow light on, it's best to head to a gas station promptly for refueling.

11

1

Share

What causes difficulty in shifting gears for Dongfeng Tianlong?

The reasons for difficulty in shifting gears in Dongfeng Tianlong are as follows: 1. The positioning component of the gearshift lever's ball head fails: The gearshift lever can rotate freely around its own axis, making it impossible to accurately control the gear position; it may also be due to wear on the spherical working surface at the lower end of the gearshift lever, preventing it from controlling the shift fork or the shift head's groove, making both engaging and disengaging gears impossible. If it's the first case, the issue can be resolved through repair; if it's the second case, the gearshift lever needs to be replaced directly. 2. The clutch fails to disengage completely while the transmission's shifting mechanism is operational. This fault can be resolved by adjusting the clutch or replacing some clutch components to ensure the clutch has appropriate free play and separation clearance. 3. Pressure plate failure: This may also cause difficulty in engaging gears. The issue of hard shifting when the engine is hot is mostly caused by long-term wear of the pressure plate or aging of the separation fingers, requiring replacement of the pressure plate. This repair is relatively complex, as the entire transmission must be removed to replace the pressure plate. 4. Issues with the gear selection or shift cables: Manual transmission cars still use two cables for gear shifting during operation. If either of these cables breaks, it can lead to gear shifting problems. 5. Poorly run-in components: If the components inside the transmission of a new car have not been properly run-in, some gear components may be stiff, causing difficulty in shifting. This situation will naturally improve after a period of running-in. 6. Transmission oil issues: If the transmission components lack oil or the oil quality is poor, shifting will feel stiff. Transmission oil is similar to engine oil and requires regular checks and timely top-ups.

16

0

Share

Do automatic transmission cars need to warm up in winter?

Generally speaking, automatic transmission cars also need to warm up in winter. The purpose of warming up is to allow the engine to reach its normal operating temperature. Idling warm-up time: When starting the car in winter, you will usually find that the water temperature is relatively low, and the tachometer needle will be relatively high. At this time, it is necessary to warm up the car while idling, which means waiting in the car for about half a minute to a minute. Generally, when the engine speed drops to around 1200 RPM and the water temperature reaches about 50 degrees, you can drive away normally. Consequences of not warming up: In winter, when temperatures are low, most of the engine oil settles at the bottom of the engine. If you suddenly start driving, the oil pump cannot immediately lubricate all parts of the engine, which can cause damage to engine components.

11

5

Share

What does a triangle with an exclamation mark mean in Dongfeng Tianlong?

A triangle with an exclamation mark indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic Transmission Fault: A yellow gear with an exclamation mark is the automatic transmission fault warning light, indicating a transmission malfunction or transmission fluid level below the normal range. Transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating brake system failure or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire Pressure Anomaly: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.

8

1

Share

How Often Should Engine Maintenance Be Performed?

Engine maintenance should be performed every six months. Steps for engine maintenance: Clean the air filter; Remove sludge from the throttle body, as excessive sludge can cause air resistance, leading to increased fuel consumption; Clean carbon deposits from the fuel injectors, as the combustion chamber is prone to carbon buildup, which can make starting difficult; Carbon deposits in the fuel injectors can also clog fuel passages, distort fuel injection, and reduce atomization, naturally increasing fuel consumption. Precautions for engine maintenance: First, ensure sufficient coolant is added and check the thermostat. Pay attention to the temperature gauge during daily driving, ensuring it does not exceed 95 degrees Celsius. Also, always warm up the engine when starting a cold vehicle, use fuel that meets the specified standards, and refuel when the tank is less than one-third full.

17

1

Share

Which Parts of a Car Can Be Modified?

What Happens When the Injection Nozzle Pressure of a Diesel Vehicle is Insufficient?

How Far Can You Drive on the Last Fuel Gauge Bar?

What causes difficulty in shifting gears for Dongfeng Tianlong?

Do automatic transmission cars need to warm up in winter?

What does a triangle with an exclamation mark mean in Dongfeng Tianlong?

How Often Should Engine Maintenance Be Performed?

Can a car's mileage be tampered with?

Why does an automatic transmission have high RPM but no acceleration?

What is the fuel tank capacity of the Great Wall Fengjun 5?

Can I still drive with a tire pressure of 168?