Which parts must be cleaned when washing a car?

1 Answers
EvanAnn
07/28/25 7:18pm
Here are the parts that must be cleaned when washing a car: 1. Fenders and mudguards. When cleaning fenders and mudguards, pay attention to the inner parts. Long-term neglect can lead to impurity accumulation, which may damage the nearby paint. 2. Rearview mirror corners. After washing, ensure no dirty water remains in the rearview mirror corners to avoid leaving grime. 3. Engine compartment. Cleaning the engine compartment prevents dust buildup and protects circuit components from premature aging. After washing, wipe off any residual water stains around the engine hood edges. 4. Door seals and interior. Use specialized foam cleaner for interior cleaning. 5. Floor mats. Unclean floor mats can cause unpleasant odors.
Was this review help?
10
2
Share
More Forum Discussions

What is the fuel tank capacity in liters for the 2011 Nissan Sunny?

The fuel tank capacity of the Sunny 2016 1.5XE Manual Leading Edition is 41L. It is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission (MT). The drivetrain configuration is front-engine, front-wheel drive. The front suspension type is MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension. Among vehicles in the same class, the 2021 Honda Envix Hybrid 1.5L Net Comfort Edition has a fuel tank capacity of 40L, and the 2021 Nissan Tiida 1.6L Manual Joy Edition features a 50L fuel tank. During actual refueling, the amount of fuel filled may exceed the calibrated capacity. This occurs because automakers measure tank capacity from the base to the safety threshold, leaving additional space between the safety threshold and the filler neck. This design accommodates fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the filler neck, the actual refueling volume will surpass the nominal tank capacity. To check remaining fuel levels, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel, while nearing F signifies sufficient fuel levels.
20
4
Share

Can You Still Drive When the Yellow Triangle Exclamation Mark Lights Up in the Car?

A triangle with an exclamation mark indicates a malfunction in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in cars. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four situations: Automatic Transmission Fault: A yellow gear with an exclamation mark indicates an automatic transmission fault warning light, signaling a transmission malfunction or transmission fluid level below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. Immediate inspection and repair of the brake system are required to avoid accidents. Tire Pressure Anomaly: A bracket with a horizontal line and an exclamation mark in the middle represents a tire pressure monitoring warning light. This light turns on when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is a lighting fault indicator, signaling a malfunction in the car's lights. Solution: Visit a 4S shop for inspection and repair as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
11
3
Share

What does the exclamation mark on the Little Ant dashboard mean?

When an exclamation mark appears on the car dashboard, there are five possible scenarios: general fault, automatic transmission fault, brake system fault, abnormal tire pressure, or lighting fault. Below is a detailed analysis of these five situations: General Fault: A triangle with an exclamation mark inside indicates a malfunction in the car's general performance or components and functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a transmission malfunction or transmission lubricant level below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Abnormal Tire Pressure: A horizontal line with parentheses below and an exclamation mark in the middle indicates the tire pressure monitoring warning light. This light turns on when the tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
4
5
Share

What is the fuel tank capacity of the 2015 Sagitar in liters?

The fuel tank capacity of the 2015 Sagitar is 55L. Owners who purchased the 2015 Langdong can also check this information in the vehicle's configuration sheet. The 2015 Sagitar comes in five models with different fuel consumption levels: The Sagitar 1.6L automatic model uses 92-octane fuel, with an NEDC combined fuel consumption of 6.8L per 100km. A full tank can cover approximately 808km. The Sagitar 1.6L manual model uses 92-octane fuel, with an NEDC combined fuel consumption of 6.5L per 100km. A full tank can cover approximately 846km. The Sagitar 280TSI automatic model uses 95-octane fuel, with an NEDC combined fuel consumption of 5.9L per 100km. A full tank can cover approximately 932km. The Sagitar 230TSI automatic model uses 95-octane fuel, with an NEDC combined fuel consumption of 6.2L per 100km. A full tank can cover approximately 887km. The Sagitar 230TSI manual model uses 95-octane fuel, with an NEDC combined fuel consumption of 6.3L per 100km. A full tank can cover approximately 873km. During daily driving, it's essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge in the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it's advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, designed to allow fuel expansion due to temperature increases without causing overflow. If fuel is added up to the tank opening during refueling, the actual amount may exceed the marked capacity. Other factors affecting vehicle fuel consumption include: Vehicle weight: There is a direct correlation between weight and fuel consumption. A 10% reduction in weight can lead to a corresponding percentage drop in fuel consumption. Vehicle aerodynamics: A lower drag coefficient results in noticeably reduced fuel consumption, while a higher coefficient increases fuel usage proportionally. Low tire pressure: This increases tire friction and adhesion, leading to higher fuel consumption. Driving habits: Rapid acceleration and frequent braking can significantly increase fuel consumption. Wind direction: Driving with a tailwind reduces fuel consumption, while a headwind increases engine workload and fuel usage. Road conditions: Fuel consumption is lower on flat roads and higher on uneven or steep terrain. Additional electronic devices: Using extra equipment like air conditioning during driving increases fuel consumption.
14
4
Share

How many cylinders does the Audi A6 engine have?

Audi A6 is equipped with a four-cylinder engine. Working principle of four-cylinder engine: It generally converts chemical energy into mechanical energy. Sometimes the term 'engine' can refer to either the power generation device alone or the entire machine including the power unit, such as gasoline engines or aircraft engines. The core component of an engine is the cylinder, which serves as the power source of the entire vehicle. Applications of four-cylinder engines: The four-cylinder engine's structure mainly consists of cylinder block, crankcase, cylinder head, and cylinder gasket. Primary applications: Widely used in car engines, motorcycles, chainsaws, and other small-power machinery.
1
3
Share

Why is Toyota durable?

Toyota is a Japanese car, and Japanese cars generally have higher usability, excellent quality, and great durability, making them less prone to breakdowns. Toyota has strict quality standards: Toyota internally has four quality standards: A, B, C, and D, with D being the lowest. Models produced according to the D standard include all of Toyota's compact cars, while the C standard applies to Toyota's mainstream models. Therefore, cars with similar prices all have good quality. Strong technology and advanced processes: Toyota is not weak in R&D capability but is conservative in the application of technology. A mature technology has relatively high innovation and yields good results.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.