Which Part of the Car Should Not Be Submerged in Water, the Front or the Rear?

1 Answers
SanMackenzie
07/29/25 12:54pm
Both the front and rear of the car should not normally be submerged in water. The front mainly includes the engine compartment, while the rear contains the exhaust pipe. Below is extended information about water damage to cars: Submersion while stationary: If a vehicle is submerged while stationary, the engine is generally not damaged, and the owner can claim compensation if they have purchased vehicle damage insurance. However, if the owner attempts to start the car and drive it out of the submerged area, causing engine damage, even if they have purchased water submersion insurance, the claim will not be honored. Malfunction while driving through water: If the owner has purchased water submersion insurance, also known as engine special loss insurance, they can file a claim with the insurance company. If only vehicle damage insurance is purchased without water submersion insurance, only parts other than the engine can be compensated. Engine damage caused by restarting the engine while submerged will not be covered by insurance, even if water submersion insurance is purchased.
Was this review help?
10
4
Share
More Forum Discussions

What effects will a motorcycle clutch being too loose or too tight have on the vehicle?

If it's too loose, gear shifting will be jerky, and the engine may even stall. If it's too tight, the clutch becomes overly sensitive and harder to operate; if excessively tight, it can easily slip and result in insufficient power. Below is relevant information about the clutch: Introduction: The clutch refers to the separation device between the car engine and the transmission, also known as the clutch. In automatic transmission vehicles, the clutch is integrated into the transmission, enabling automatic gear shifting. Function: As the name suggests, the clutch serves to separate and engage. It connects or disconnects the engine from the wheel transmission system. When the clutch is depressed, the engine's transmission system is disconnected from the wheels, preventing engine power from being transmitted to the wheels to drive the car. When the clutch is released, the engine's transmission system connects to the wheels, transmitting power to the wheels and allowing the vehicle to move.
14
0
Share

Why does the front radar beep when there is nothing in front?

The reasons why the front radar beeps when there is nothing in front are as follows: 1. Sensor hole position and location: The sensor hole is too small or too tight, or it is installed on an iron or hard protective bar. 2. Foreign objects on the surface: There are attachments such as paint, snow blocks, or ice blocks on the sensor surface. 3. Poor sensor characteristics, or the working environment temperature is too low. 4. Sensor failure. Here is some relevant information: 1. Reversing radar: The full name of the reversing radar is reversing anti-collision radar, also known as a parking assist device. It is a safety assist device for parking or reversing a car, consisting of ultrasonic sensors (commonly known as probes), controllers, and displays (or buzzers). 2. Function: It can inform the driver of the surrounding obstacles through sound or a more intuitive display, relieving the driver's troubles caused by looking around when parking, reversing, or starting the vehicle, and helping the driver eliminate blind spots and blurred vision defects, thereby improving driving safety.
13
1
Share

Remedial Measures for Driver's License Downgrade?

There are no remedial measures for a driver's license downgrade. After deducting 12 points from Class A or Class B motor vehicle driver's licenses, at the end of the scoring cycle, the license holder must participate in study and exams, and complete the downgrade procedure. There is no way to remedy this; the only option is to reapply for a higher-class license after the downgrade, following the required time frame. Relevant information about driver's licenses is as follows: 1. Introduction: The People's Republic of China Motor Vehicle Driver's License, referred to as a driver's license or 'driver's permit,' is a mandatory certification for motor vehicle drivers, established in accordance with the laws of the People's Republic of China. 2. Examination Content: The test subjects include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving), totaling three items.
15
5
Share

Where is the X-Trail trunk switch located?

The trunk switch is located below the left side of the steering wheel. To the right of the switch are three modes, in order: Hands-free operation, Switch operation. Below is the relevant introduction: 1. Switch operation: (1) Instrument panel: Press the electric rear door switch on the instrument panel for more than 1 second. (2) Trunk: Press the open button on the trunk. (3) Smart key: Press the electric trunk door button on the smart key for more than 1 second. 2. Hands-free operation: (1) Key: With the key. (2) Sensor: Place your hand or luggage (either human or non-human) near the hands-free sensor for about 1 second. The trunk door will unlock and open automatically.
18
5
Share

How to Turn on the Headlights of a Sylphy?

The Sylphy has a light control lever on the right side of the steering wheel. Simply rotate the light button to the 'off' or 'on' position to turn the headlights off or on. The specific functions of the light control lever are as follows: 1. The Nissan Sylphy light control lever is located on the left side of the steering wheel. 2. The '0FF' position is for turning off the vehicle lights. 3. Adjusting the left knob to the middle position turns on the parking lights. 4. Adjusting the left knob to the top position turns on the low beam headlights. 5. The fog lights are adjusted using the middle knob. 6. Pushing the lever forward activates the high beams continuously, while pulling it backward activates a single high beam flash. 7. Finally, pushing the lever up or down activates the turn signals. Good lighting performance requires headlights to provide adequate illumination while minimizing glare. To meet these requirements, headlights are designed with both high beam and low beam modes.
5
5
Share

What is the keyless start method for automatic transmission vehicles?

The keyless start method for automatic transmission vehicles is as follows: 1. Without pressing the foot brake, press the start button twice to allow the car to self-check for more than 6 seconds; 2. Press the foot brake; 3. Press the start/stop button to ignite the engine and release the foot brake; 4. Warm up the car while stationary; 5. Press the foot brake again; 6. Release the handbrake; 7. Shift the gear from P (Park) to D (Drive) (if starting on a slope, you may first shift to D); 8. Slowly release the foot brake to start moving. Automatic transmission vehicles typically use a hydraulic transmission device to replace the mechanical clutch found in manual transmission vehicles, hence there is no clutch pedal. When the engine speed is low, the torque transmitted by the fluid is limited and insufficient to propel the car forward. When the gear lever is placed in the drive position and the brake pedal is released, as the accelerator is pressed and the engine speed increases, the transmitted torque rises, pushing the car forward.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.