Which one to choose between EQC and SAIC Audi e-tron?

3 Answers
DiElliot
07/29/25 11:20am
Both models are electric vehicles, and you can make a comprehensive consideration based on the following introduction. Mercedes-Benz EQC: Equipped with a full-time four-wheel drive system composed of two asynchronous motors at the front and rear, with a maximum total power of 300kW and a maximum total torque of 730Nm, matched with a fixed gear ratio transmission, the 0-100km/h acceleration time is 5.1 seconds. SAIC Audi Q5 e-tron: The Audi e-tron is also equipped with a full-time four-wheel drive system composed of two asynchronous motors at the front and rear, with a total power of 300kW and a total torque of 664Nm, matched with a 2-speed automatic transmission, achieving a 0-100km/h acceleration time of 5.7 seconds. It offers the space experience of a C-class SUV. The total energy of the power battery is 83.4kWh, consistent with the high-end models of the ID.4 and ID.6 series, and the new vehicle can achieve a range of over 560km under the CLTC-P new national standard.
Was this review help?
14
3
Share
MacCaden
08/13/25 6:34pm
I usually commute with an electric vehicle, so daily comfort is a key factor when choosing a car. After driving the EQC, I found its seats provide excellent support, and the suspension filters bumps superbly, making long drives fatigue-free. The e-tron offers more space, but the slightly higher noise levels during driving can be a mood killer. Both have decent charging times, reaching around 70-80% in an hour, and with plenty of charging stations in the city now, it's quite convenient. If you frequently drive on highways, the EQC's 400+ km range is reliable. Overall, Mercedes-Benz offers more stable quality.
Was this review help?
7
5
Share
Expand All
VanAriana
10/08/25 3:49am
From a technical perspective, the e-tron's powertrain is more impressive, with a fierce 4.5-second acceleration and refined quattro control. The EQC has a slightly smaller battery capacity, and its range drops faster in summer, though its charging curve remains stable. Hardware-wise, Audi's electric drive module is more updated, leading in fast-charging technology, while Mercedes' driving assistance details are finely tuned. It's recommended to test drive to experience the acceleration and steering feedback.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

Where is the output speed sensor of the 09g transmission located?

The output speed sensor of the 09g transmission is located at the upper front of the transmission. The automotive transmission is a set of gear-shifting devices used to coordinate the engine speed with the actual driving speed of the wheels, aiming to achieve optimal engine performance. The transmission can produce different gear ratios between the engine and wheels during vehicle operation. Below is an introduction to dual-clutch transmissions: 1. Dual-clutch transmissions come in two types: dry and wet. 2. A wet dual-clutch refers to a multi-plate clutch system where two sets of coaxial clutches (one large and one small) are installed together in a sealed oil chamber filled with hydraulic fluid. Thus, the wet clutch structure offers better adjustment capability and superior thermal performance, enabling it to transmit higher torque. 3. The dry dual-clutch was developed based on the technology of the 6-speed DQ250 wet dual-clutch, with simplified hydraulic systems. 4. The structure of a dual-clutch transmission is very similar to that of a manual transmission, featuring two sets of clutches responsible for shifting even and odd gears respectively, significantly improving shift speed.
14
0
Share

Is a Driving License Required for Car Paint Touch-Up?

Car paint touch-up requires leaving the driving license, and here are the specific reasons: 1. National requirements for vehicle repairs: Qualified shops performing sheet metal painting or repair projects are required by public security authorities to record vehicle information into the public security management system before proceeding with repairs. Failure to record the information in the system will result in corresponding liabilities, primarily to facilitate the tracing of hit-and-run vehicles or illegal activities such as smuggling and theft. Recording the information requires the vehicle's driving license, but the shop should return it promptly after recording. 2. Uploading vehicle information for post-accident repairs: If the paint job is covered by insurance and an immediate damage assessment cannot be made, and the owner is not present to wait, the owner may need to leave the driving license to facilitate the later upload of vehicle information. Many shops handling a high volume of accident vehicles will request the owner to leave the driving license and retrieve it together with the car after repairs. There are also cases where some repair shops retain the owner's driving license to manipulate insurance claims, but such practices are now rare.
5
2
Share

What are the design specifications for non-motorized vehicle ramps?

The ramp width should not be less than 0.30m, the slope should not exceed 1:5, and the ramp length should not exceed 6m. Below is an introduction to ramps: 1. Introduction: Refers to a uniformly inclined walkway or driveway. It serves as an inclined traffic passage connecting areas with elevation differences or floors, as well as vertical traffic and evacuation measures at entrances. 2. Content: When steps cannot be constructed due to usage or other reasons, ramps can be used to address height variations. Public green spaces and public buildings typically require barrier-free access, making ramps an essential element. Ramps are an important method for pedestrians to navigate elevation changes on the ground. 3. Application: Used in various public places such as residential thresholds, hotel corridors, convention centers, shopping malls, supermarket entrances, residential community gates, nursing homes, hospitals, train stations, airports, and more.
8
5
Share

What is the typical capacity of a food delivery box placed on the pedal?

The typical capacity of a food delivery box placed on the pedal is generally 30-40 liters. Below is an introduction about car pedals: 1. Introduction: The welcome pedal is an automotive accessory used to decorate the threshold area of a car, serving the purpose of protecting and beautifying the car body. It is one of the automotive modification products. Welcome pedals are mainly installed on the mudguards near the car doors, with all four doors having them. The design of car welcome pedals varies according to different car models. 2. Features: Made of stainless steel material, the welcome pedal has a smooth and shiny appearance, is easy to install, and provides certain anti-collision and anti-scratch functions. It also serves as a decorative element, being simple yet elegant. 3. Advantages: The most obvious advantage of installing welcome pedals is their decorative effect on the car. Many welcome pedals are equipped with circuits that light up when the car door is opened, creating a welcoming atmosphere for passengers.
3
1
Share

Does Desay SV 280b Support CarPlay?

Desay SV 280b does not support CarPlay. CarPlay is an in-car system. Automotive modules contain different in-car systems. Below is a detailed introduction about automotive modules: 1. Automotive Engine Control Module: The automotive engine control module is the core component of engine control. Based on input information from various sensors, it controls the fuel injection and ignition timing of the engine and provides optimal control commands for other output devices. 2. Automotive Ignition Module: The automotive ignition module, also known as the ignition controller, can achieve automatic ignition, flame indication, flameout alarm, and signal transmission by selecting the appropriate combination of metal probes or UV-sensitive tubes according to different environmental requirements.
16
0
Share

Which car has an airbag in front of the passenger seat?

airbag is the symbol for a safety airbag. Additional information is as follows: 1. Introduction: The airbag system is a passive safety protection system (see vehicle safety performance). When used in conjunction with seat belts, it can provide effective collision protection for occupants. 2. Components: It mainly consists of airbag sensors, collision airbags, and electronic control devices. The driver-side collision airbag is installed in the steering wheel, while the passenger-side collision airbag is usually installed on the dashboard. Airbag sensors are installed on the left, right, and center of the cabin partition; the central airbag sensor and the airbag system are installed together with the electronic control device. The airbag module mainly consists of the airbag, gas generator, and igniter.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.