Which one to choose between CS35Plus and Oshan X5?

Are the Three Major Components of the Eclipse Cross Domestic or Imported?

The three major components of the Eclipse Cross are domestic. More information about the three major components of a car is as follows: 1. The three major components of a car refer to the engine, chassis, and transmission. 2. Engine: The car engine is the device that provides power to the car, determining its power, economy, stability, and environmental friendliness. Depending on the power source, car engines can be classified into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems. 3. Transmission: The car transmission is commonly referred to as the 'gearbox' in cars and the 'speed changer' in industrial machinery. It is a mechanical or hydraulic device for mechanical power conversion. 4. Chassis: The car chassis consists of four parts: the transmission system, running gear, steering system, and braking system. The chassis supports and installs the car engine and its various components and assemblies, forming the overall shape of the car. It also receives the power from the engine to enable the car to move and ensure normal operation.

2

0

Share

What Causes the Abnormal Noise When Pressing and Releasing the Clutch?

Reasons for abnormal noise when pressing the clutch: 1. Bearing damage: The release bearing is severely worn or lacks lubrication, or the bearing return spring is too soft, broken, or detached. 2. Loose rivets: The driven plate rivets are loose, the steel plate is cracked, or the damping spring is broken. 3. Damaged pressure plate spring: The clutch pressure plate spring is broken or the release bearing is loose. 4. Damaged release lever: The clutch release lever is broken, excessively worn, or the release lever adjustment bolt is broken. Extended content, diagnosis and troubleshooting of clutch abnormal noise: 1. Slightly press the clutch pedal to make the release lever contact the release bearing. If a 'grinding' sound is heard, it indicates abnormal noise from the release bearing. If the noise persists after lubrication, the bearing is excessively worn and should be replaced. 2. If the noise occurs when the pedal is fully pressed and disappears when released, it indicates loose or broken clutch damping springs. 3. If the noise occurs when the clutch just engages or disengages while repeatedly pressing the pedal, it indicates loose rivets or excessive spline wear. 4. If there is intermittent collision noise, it may be due to axial movement of the release bearing, and the release bearing return spring should be replaced.

1

5

Share

Can you drive over the white grid lines at intersections?

Yellow grid lines are guiding lines, and you should not drive over them. Below is a classification of traffic markings: 1. By shape: Lines: Solid or dashed lines marked on the road surface, curbstones, or vertical surfaces. Character markings: Text, numbers, and various graphic symbols marked on the road surface. Raised pavement markers: Fixed on the road surface, these raised marking blocks serve as traffic lines, used on highways or other roads to mark centerlines, lane dividers, edge lines, as well as curves, entrance/exit ramps, guiding lines, road narrowing, and road obstacles. Delineators: Indicate the direction of the road and the boundaries of the traffic lanes, continuously and symmetrically placed along the left and right sides of the road. 2. By installation method: Longitudinal markings: Lines set along the direction of traffic. Transverse markings: Lines set at an angle to the direction of traffic. Other markings: Character markings or other forms of markings. 3. By function: Indicative markings: Lines that indicate traffic lanes, direction of travel, road edges, sidewalks, and other facilities. Prohibitive markings: Notify road users of special regulations such as compliance, prohibition, or restrictions that drivers and pedestrians must strictly adhere to. Warning markings: Alert drivers and pedestrians to special road conditions, increasing vigilance and preparing them to take preventive or responsive measures.

13

0

Share

How far can you drive if the coolant pipe bursts?

After the water pipe bursts, the car cannot continue to drive. You must repair the pipe and add water or coolant before you can continue driving. If the car does not overheat (boil), the burst is caused by poor quality or aging of the pipe. Replacing it with a high-quality pipe will solve the problem. No need to worry. Extended content: If the car boils, the following checks should be performed: 1. Insufficient engine coolant. 2. Faulty water temperature sensor or gauge. 3. Driving downwind or prolonged low-speed, high-load driving in hot seasons. 4. Ignition timing too early or too late. 5. The louver cannot fully open. 6. The air-fuel mixture is too lean or too rich. 7. The radiator is externally dirty or internally scaled, causing poor heat dissipation. The radiator needs to be cleaned or replaced. 8. The fan clutch engages too late, or the cooling fan is not working, the fan rotation resistance is too high, the blades are installed backward, or the blades are damaged. 9. The electric fan performs poorly or lacks high speed. 10. Excessive carbon deposits in the combustion chamber. 11. The water pump belt is too loose. 12. Issues with the three-way catalytic converter. 13. Air passing through water in the cylinder head gasket failure. 14. The thermostat does not open properly and needs replacement. 15. Blockages in other water pipes, elbows, or water passages. 16. The water pump is not working well (insufficient coolant circulation).

3

Share

What are the tire specifications for the 10th-generation Civic?

The 10th-generation Civic comes with two tire specifications: 215/50R17 and 215/55R16. In 215/50R17, the first number 215 indicates the tire width is 215mm, 50 represents the aspect ratio of 50% (meaning the sidewall height is 50% of the tire width), and 17 denotes the rim diameter in inches. The letter "R" stands for radial tire. Similarly, in 215/55R16, 215 indicates the tire width is 215mm, 55 represents the aspect ratio of 55%, and 16 denotes the rim diameter in inches. The letter "R" stands for radial tire. The tire brand for the 10th-generation Civic is YOKOHAMA, and the spare tire is non-full size. If you want to replace the tires yourself, follow these steps: Retrieve the spare tire and jack. Position the jack under the vehicle frame near the tire to be replaced, ensuring it contacts the metal part of the frame. Raise the jack until it supports the car. Ensure the jack is positioned correctly under the vehicle and forms a right angle with the ground. Remove the hubcap and loosen the nuts counterclockwise. Do not fully remove the nuts yet—just enough to reduce resistance. Keeping the tire on the ground during initial loosening ensures the nuts turn, not the tire. Continue turning the nuts counterclockwise until they come off. Repeat this for all lug nuts and remove them completely. Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and hand-tighten them until all nuts are snug. The tire replacement is now complete. Besides the specifications, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord. Speed rating: Indicates the maximum speed the tire can sustain under specified conditions. Letters A to Z represent certified speed ratings from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the compatible rim size for practical use, such as "Standard Rim 5.00F."

9

1

Share

What to Practice for the First Time in Subject 2 Driving?

Subject 2 first-time driving practice focuses on clutch control. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment, specifically referring to the field driving skills test. For small vehicles (C1/C2), the exam includes the following five mandatory items (some regions may have a sixth item, highway card collection): Reverse Parking: Park the car in the designated reverse parking spot within the allotted time without crossing the yellow boundary lines on either side. Slope Fixed-point Parking and Starting: Stop the car at the designated slope starting point and start smoothly within the time limit, avoiding overtime and crossing lines. Right-angle Turn (commonly known as 90-degree turn): Complete the turn at a right-angle intersection within the specified time without touching the yellow boundary lines on either side. Parallel Parking: Slowly drive the car into the side parking spot within the time limit without touching the yellow boundary lines. Curve Driving (commonly known as S-curve): Slowly enter the S-shaped intersection and smoothly navigate through the designated route without crossing the yellow boundary lines. Practice Driving Tips: Overtaking and Lane Changing: Be decisive and firm when overtaking or changing lanes, staying as close as possible to the vehicle in front, especially on two-way lanes, to save time. Always check the traffic in the adjacent lane via the rearview mirror, assessing both distance and the speed of the following vehicle. Listening to Engine Sounds: Unusual noises occur when the speed is high but the gear is low, or when dragging the gear. Similarly, abnormal sounds and vehicle shaking can happen when driving at low speed in a high gear. Avoid Frequent Neutral Gear Usage: While coasting in neutral is possible at low speeds without compromising safety, it consumes more fuel for fuel-injected vehicles. Never coast in neutral when going downhill, as it can lead to brake failure and potential loss of vehicle control if the engine stalls.

18

4

Share

Which one to choose between CS35Plus and Oshan X5?

Are the Three Major Components of the Eclipse Cross Domestic or Imported?

What Causes the Abnormal Noise When Pressing and Releasing the Clutch?

Can you drive over the white grid lines at intersections?

How far can you drive if the coolant pipe bursts?

What are the tire specifications for the 10th-generation Civic?

What to Practice for the First Time in Subject 2 Driving?

What Causes Starter Freewheeling?

Which Gear is the Reverse Gear?

What Does a Crossover Vehicle Mean?

What are the differences between Xiangling M1 and M2?