Which one to buy, Toyota a25a or a25c?

2 Answers
LeahLynn
07/23/25 8:41pm
You can buy the a25a. The Toyota a25a and a25c engines are essentially the same engine with identical performance and parameters. The a25a is originally made in Japan, while the a25 is produced by GAC Toyota Engine Factory. Below is the relevant introduction: a25a engine: This A25A-FKS (2.5D-4S) engine employs a series of new technologies: the cooling system uses a water jacket gasket, which plays a guiding role in cooling, reducing the temperature near the exhaust valve under high-load conditions and lowering the probability of knocking. Engine: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy.
Was this review help?
7
5
Share
ORonan
08/10/25 6:37pm
Having driven for many years, I've always valued driving pleasure and a sporty feel. The A25A's 2.5-liter naturally aspirated gasoline engine delivers ample power with strong acceleration force, making overtaking on highways effortless and its response truly quick. In contrast, while the A25C's hybrid system is smooth and fuel-efficient, it lacks some of the explosive power, missing that raw thrill during acceleration. In terms of daily maintenance, the A25A's mechanical simplicity makes it easy to find mechanics familiar with it. Sure, city driving consumes slightly more fuel, but the sheer driving joy is well worth it. Overall, if you love the sensation of control, the A25A is definitely the right choice, and it won't disappoint on long drives either.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

Why Do Brakes Lock Up?

Brakes lock up because in cars without ABS, when the brake pedal is pressed hard while driving, the wheel speed decreases rapidly. If the braking force exceeds the friction between the wheels and the ground, the wheels will lock up. If the front wheels lock up, the vehicle will lose steering ability. If the rear wheels lock up, it may cause the vehicle to skid, which is very dangerous, especially on rainy or snowy roads. ABS does not activate easily; it only intervenes during emergency braking. In such cases, the car will not experience tire lock-up or blowouts due to sudden braking, as the braking system adjusts accordingly. This not only reduces the pressure on the tires but also ensures the car maintains steering ability, thereby reducing the occurrence of safety accidents.
12
3
Share

Where is the handbrake of Lexus ES200 located?

The handbrake of this model is a button-type, located directly below the center console, marked with a 'P' for the electronic parking brake. Below is a relevant introduction about the electronic parking brake: 1. The electronic parking brake is a technology that achieves vehicle parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both achieving the purpose of vehicle parking braking by generating friction between the brake disc and brake pads, except that the previous mechanical handbrake lever has been replaced with an electronic button. 2. The electronic parking brake, also known as the electronic brake braking system, combines the functions of temporary braking during vehicle operation and long-term braking after parking, achieving vehicle parking braking through electronic control. It also extends to the vehicle's automatic parking function, allowing the driver to avoid prolonged braking when the vehicle is parked, effectively preventing the vehicle from sliding.
18
5
Share

How to Reset the Maintenance Wrench Light on Lavida?

To reset the maintenance reminder wrench light on Lavida, follow these steps: Turn off the engine, rotate the mileage reset knob on the dashboard counterclockwise by one position and hold it. Then, turn the car key to start the engine. After the engine starts, release the reset knob to allow it to return to its original position automatically. Below is an introduction to the maintenance wrench light: 1. The wrench light on the dashboard serves as a reminder that the car is due for maintenance. Typically, it illuminates when the vehicle reaches the predetermined mileage, prompting the owner to visit a service center for maintenance. 2. The set intervals vary by car model, so always refer to the vehicle's user manual for accurate information. After maintenance at a service center, it's necessary to reset the maintenance light to zero. If not reset, the indicator light will remain on even after maintenance has been performed.
8
5
Share

Can a car be used to jump-start a motorcycle with a dead battery?

Yes, a car can be used to jump-start a motorcycle with a dead battery, as both motorcycles and cars typically use 12V batteries, meaning they have the same voltage. Below are some key points about jump-starting: 1. The battery provides power for starting the car and operating its electronic devices. If the car's battery is depleted, it may prevent the car from starting normally. If the battery voltage is too low, the car may experience difficulty starting or fail to start altogether. 2. If a motorcycle's battery is dead, it is best to remove the battery and charge it using a charger. In emergencies, jump-starting can be used to charge the battery. This requires a rescue vehicle and two jumper cables. 3. After opening the hood, connect the positive and negative terminals of the batteries using the jumper cables. Once connected, start the car and let the engine idle. In this state, you can attempt to start the motorcycle, which should start up quickly.
20
2
Share

What Causes a Car to Start but Unable to Move?

If a car starts but cannot move, possible causes include carbon buildup in the engine, weak spark plug ignition energy, a depleted battery, insufficient fuel line pressure, a blocked exhaust pipe, or engine timing mismatch. Each issue requires specific analysis. Detailed explanations are as follows: Carbon Buildup: If accompanied by slight shaking at idle, cleaning the throttle body, intake manifold carbon deposits, and fuel injectors can resolve the issue. Weak Spark Plug Ignition Energy: This can prevent the engine from starting. Depleted Battery: Simply seek assistance from another vehicle or a nearby tire shop/auto repair shop to jump-start the car using another battery. Insufficient Fuel Line Pressure: Low fuel pressure in the low-pressure fuel line directly causes the engine to fail during secondary ignition. Components requiring inspection include the fuel pressure regulator, fuel pump, fuel filter, and fuel lines. Blocked Exhaust Pipe: This is usually caused by a broken catalytic converter obstructing exhaust flow or external forces deforming the exhaust pipe. Engine Timing Mismatch: Many car engines use timing belts. Incorrect replacement of the alternator belt in certain engine models may cause the belt to skip teeth, preventing the engine from starting.
6
4
Share

How to Clean the Throttle Body?

Cleaning the throttle body can be done following these steps: 1. Locate the throttle body. Open the car's engine hood and find the throttle body position. There is a black air pipe connector with a metal part secured by a metal clamp—this is the throttle body. 2. Next, use a screwdriver to loosen the metal clamp on the throttle body. You don't need to remove it completely; just loosen it sufficiently. Then, detach the plastic pipe connected to the throttle body. 3. After removing the throttle body, you can see the inside, which is covered with oil stains and carbon deposits. Take the throttle body cleaner and spray it inside a few times to dissolve the oil and carbon deposits. 4. Then, wipe it clean with a paper towel. Use your finger or another object to open the movable flap inside the throttle body and spray cleaner inside again, then wipe it clean with a paper towel. 5. Once cleaned, reassemble everything in the reverse order. Start the car and let the engine run for a while to expel any remaining debris from the throttle body.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.