Which One is the Fog Light?

2 Answers
DelIsabelle
07/29/25 3:14am
Fog lights are located below the car's headlights, at the position closest to the ground on the body below the bumper. Here is some relevant knowledge about fog lights: The function of fog lights: They are used to illuminate the road and remind vehicles in front and behind to maintain a safe distance during rainy or foggy weather. The visibility range of regular vehicle headlights is generally only 30 to 50 meters, while the visibility range of fog lights can reach about 100 meters. Precautions for using fog lights: Do not use fog lights when driving at night without fog, as front fog lights lack a light shield and rear fog lights have high-power bulbs. This can create dazzling brightness for oncoming drivers and those following behind, which can further compromise driving safety.
Was this review help?
1
1
Share
DelEvan
08/12/25 7:06am
Fog lights are actually specialized lights on vehicles designed for use in foggy, rainy, or snowy conditions. It reminds me of last month when I went to the mountains and encountered heavy fog—relying solely on the fog lights prevented me from getting lost. They are positioned in two locations on the car: the front fog lights are installed near the bumper at the front, usually round in shape, emitting yellow or white light specifically to penetrate the fog and illuminate the road ahead. The rear fog light is located below the trunk, near the center, with a bright red light to alert following vehicles and prevent rear-end collisions. The switch is either near the steering wheel or on the light control lever, marked with a small icon. They should only be turned on when visibility is poor, as using them unnecessarily can dazzle other drivers. These lights are truly important—failing to use them significantly increases the risk of accidents, so I always check them before driving, especially on long trips. Don’t underestimate them; fog lights can be lifesavers in emergencies, particularly when fog suddenly appears on highways, instantly improving visibility and preventing rear-end collisions. Remember, don’t use them unnecessarily in clear weather—respect traffic rules.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

What does mono mean on a car?

If there is a MONO button on the car, it means the vehicle's air conditioning can control the temperature in different zones. When this button is pressed, adjusting the temperature will result in the same airflow temperature across all zones. The function of the MONO button is to copy the driver's air conditioning settings to the passenger side with a single press, allowing the passenger to have the same temperature, fan speed, and other settings as the driver. Precautions for using the air conditioning are as follows: Using air conditioning in summer: When the weather is hot and you need to turn on the air conditioning to cool down, press the AC button, turn the temperature control knob to the blue section, and then turn on the fan switch. The indicator light will illuminate, and the car's air conditioning compressor will start working, blowing cold air from the vents. Using air conditioning in winter: When you need warm air in winter, turn the temperature control knob to the red section and turn on the fan switch to get warm air. There is no need to press the AC button. The car's heating system is not related to the compressor; the warm air is provided by the car's radiator and then blown into the cabin by the blower. This process consumes almost no energy, so there is no need to turn on the A/C button.
19
4
Share

Why is the Skoda air conditioning fan not working?

Skoda air conditioning fan not working is caused by wear and tear due to poor maintenance and overheating. Wear and tear due to poor maintenance: If a fan is used for a long time, the motor will wear out, and the motor's shaft sleeve will wear out easily, leading to burnout. Long-term lack of lubrication. The fan's rotating shaft part must be ensured to have lubricating oil; otherwise, the blades cannot be driven by the motor. Overheating causing the fan to stop: The starting capacitor's capacity decreases. When a fan is used for a long time, the capacitor's capacity will decrease, causing the motor's starting torque to become smaller and unable to drive the load. Electrical faults, such as damaged wiring. Inside the fan's motor, there is an overheating circuit breaker. If a short circuit occurs in the coil winding, the heat generation will increase rapidly in a short time, causing the motor to 'strike' and stop working.
18
5
Share

What is the issue when the Chery New A3 engine occasionally becomes more powerful?

Here are the specific reasons why the Chery New A3 engine occasionally becomes more powerful: Damaged ignition coil: Check the ignition coil for any signs of damage, bulging, or cracks. A damaged ignition coil can cause the car to shake when accelerating, with intermittent power delivery. Spark plug issues: Inspect the spark plugs to see if the ignition gap has widened or if there is excessive carbon buildup. Carbon deposits or an enlarged ignition gap can directly affect the ignition performance. Exhaust system malfunction: Examine the exhaust system to determine if the three-way catalytic converter is clogged. A blocked three-way catalytic converter can make the engine feel sluggish when accelerating, as high-temperature gases cannot be fully released.
7
3
Share

What are the reasons for the Steyr clutch being hard to depress?

Steyr clutch being hard to depress is caused by issues with the booster, poor quality pressure plate, or incorrect pressure plate installation. Booster issue: Check if the rear booster cylinder is damaged. Of course, if it's due to lack of oil or air intake, the manifested symptom would be the clutch being very easy to depress but unable to disengage. Therefore, if it's hard to depress, it cannot be caused by air intake. Pressure plate issue: Poor quality pressure plate or excessively stiff pressure plate springs can make it hard to depress. If replaced with springs that are too soft, the clutch may slip. Pressure plate installation issue: Incorrect pressure plate installation, such as installing a 280 horsepower plate on a 330 horsepower model, can also cause the clutch to be hard to depress.
6
5
Share

What to do if someone made a small dent on the car door?

Just repair it. Different materials require different repair methods. Here are the specific details: Plastic body dents: For small and slight dents, you can use a lighter with aluminum foil or a hairdryer to heat the area. Once softened, push it out from the inside with your fingers. Alternatively, pouring hot water over it can achieve the same effect. Aluminum or metal body dents: You can use a plunger coated with Vaseline around the edges, place it over the dent, and pull hard. This method is only suitable for regular, non-sharp dents. For sharper dents, it is necessary to visit a specialized car dent repair shop. Here is more information about car dent repair techniques: Meaning of dent repair technique: Car dent repair technique is also known as sheet metal repair or non-destructive repair technology. Principle of dent repair: Car dent repair technology restores the body's dents without damaging the original paint. The principle is based on optics and mechanics, using the lever principle to gradually restore dents of varying depths to their original state (similar to a factory reset on a phone).
4
4
Share

What are the reasons for the Mercedes-Benz warning light to illuminate when running out of fuel?

Mercedes-Benz warning light illumination can be related to fuel quality, engine issues, carbon deposits on spark plugs, or damage to the water temperature sensor. If the engine does not start, all dashboard lights will illuminate, and an oil fault will be indicated in Chinese. Fuel quality issues: Poor or substandard fuel quality. Some car owners may notice the engine warning light illuminating immediately after refueling, usually caused by filling up with low-quality fuel at non-standard gas stations. While this situation does not affect the vehicle's operation, it can cause damage to the engine. Carbon deposits on engine spark plugs: After prolonged use, the engine may accumulate carbon deposits, which can lead to engine damage, difficulty starting, poor acceleration, excessive engine noise, and other issues. The accumulated heat can cause irregular engine ignition, leading to engine knocking. In such cases, the engine warning light will illuminate.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.