Which One is the Brake and Which One is the Accelerator in a Car?

2 Answers
SanJosephine
07/24/25 9:30pm
The differences between the brake and accelerator in a car are as follows: 1. Position: In manual transmission cars, the brake is in the middle and the accelerator is on the right. In automatic transmission cars, the brake is on the left and the accelerator is on the right. 2. Function: The brake is a deceleration device that can stop or reduce the speed of a running locomotive, vehicle, or other transportation tools. The accelerator controls the throttle opening and the speed of the fuel-air mixture injection. By adjusting the amount of pedal pressure, the accelerator regulates the engine throttle opening, air intake, fuel quantity, and consequently the engine speed. Therefore, the harder you press the accelerator, the faster the car goes.
Was this review help?
15
5
Share
SamuelFitz
08/10/25 2:39pm
This question is very important for beginners. When I first started learning to drive, I was also always worried about mixing them up. The brake pedal of a car is usually located on the left side under the driver's feet, while the accelerator pedal is on the right. Manual transmission cars have three pedals: the clutch is on the far left, the brake in the middle, and the accelerator on the far right; but automatic transmission cars only have the brake and accelerator, with the brake on the left and the accelerator on the right. The brake is used to slow down or stop the car—pressing it will make you slow down; the accelerator, on the other hand, is for speeding up—pressing it makes the car go. Remember, this pedal layout is designed for safety to prevent missteps. I recommend that beginners find an open area to practice operating them multiple times, feel the difference between the two, and develop the habit of lightly resting the right foot on the accelerator and moving it to the brake when needed. Stay focused while driving and avoid distractions like looking at your phone, especially during rainy days or at night when visibility is poor. Understanding these points not only helps avoid accidents but also boosts driving confidence.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

How to Turn on the Atmosphere Light in Atenza?

Click the settings option on any interface of the multimedia system. Select the ambient lighting option. Click the manual option at the top. The vehicle's atmosphere light will then turn on. The color option allows you to adjust the color of the atmosphere light. The interior atmosphere light is a decorative lighting lamp, usually in colors such as red, blue, or green.
10
4
Share

How to Open a Door with a Mercedes-Benz Spare Key?

First, when the car door is locked and cannot be opened by external force, locate the keyhole on the driver's side door handle. The keyhole is usually on the right side of the driver's seat door handle. If there is no obvious keyhole, you need to flip open the cover on the right side of the handle. Then, you can insert the spare key to unlock the door.
9
5
Share

How to Shift to Neutral Gear When an Automatic Transmission Car Stalls?

Press the brake pedal of the automatic transmission car. Changing the gear lever position while the engine is off may cause transmission malfunctions when starting the vehicle. Turn the car key to the ST position. The dashboard of the automatic transmission car will light up, and the vehicle will start. Press the gear lock switch on the automatic transmission car's gear lever. Pull the gear lever of the automatic transmission car to the N position to shift into neutral gear.
10
5
Share

How to Operate the Parking Meter in Zhuhai?

Enter the timing page. First-time users need to confirm WeChat car owner service authorization to complete registration. Open the "Zhuhai Parking - Meter Payment" interface and click "Pay Later". Enter the parking space number where your vehicle is parked or select a space by road section, then click the timer button to start timing. When ending parking, click the "Vehicle Parking Notification" message or open the "Meter Payment" menu to pay. After following, reply with "parking" in the dialog box to get answers to related frequently asked questions.
4
0
Share

How much engine oil should be added to the Besturn B70?

Besturn B70 requires four liters of engine oil. Method for checking the engine oil level in Besturn B70: Reinsert the cleaned oil dipstick back into its place, ensuring it is fully inserted, then pull it out again. The oil adhering to the very end of the dipstick can now be used to check the level. Observe the oil stuck on the dipstick; if the oil level is between the MIN and MAX marks, this is the most ideal position, indicating that the engine has just the right amount of oil. Functions of engine oil: Lubrication: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing shells. To prevent excessive wear of parts, an oil film needs to be established between the two sliding surfaces. Auxiliary cooling: When the engine is running, the oil carries heat back to the oil tank and dissipates it into the air, assisting the radiator in cooling the engine. The actual cooling is done by the water outside the engine casing. Sealing and leakage prevention: The oil can form a seal between the piston rings and the piston, reducing gas leakage and preventing external contaminants from entering. Shock absorption: When the pressure at the engine cylinder port rises sharply, suddenly increasing the load on the piston, piston rings, connecting rod, and crankshaft bearings, this load is transmitted and lubricated through the bearings, cushioning the impact load.
19
5
Share

How to Turn On the Low Beam Headlights of Qoros 3?

On the left side of the steering wheel, there is a control similar to the wiper switch that manages the fog lights and low beam; rotate it twice to turn on the low beam. Directly switch to the low beam, and a low beam indicator icon will appear. If the high beam is on, push the left turn signal lever on the left side of the steering wheel downward, and the high beam indicator will display on the instrument panel. Return to the normal position by pulling the lever toward yourself twice, which will bring it back to its original position, toggling between low and high beams.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.