Which National Emission Standard Vehicles Cannot Be Transferred?

1 Answers
OMia
07/25/25 8:07am
National III emission standard vehicles cannot be transferred. The following are the reasons why National III vehicles cannot be transferred: 1. Energy conservation and emission reduction: China is one of the countries with the largest number of vehicles in the world, and this number is still increasing. The continuous increase in vehicles has caused significant air pollution. In some cities, traffic restriction policies have had to be implemented to improve this situation. Making it difficult for National III vehicles to be transferred across provinces can gradually phase out existing National III standard vehicles, thereby improving air quality. 2. Local environmental protection requirements: The implementation of a policy cannot be rolled out nationwide all at once. It is more common for a few pilot cities to start first. The restriction on transferring National III vehicles was initially implemented in cities where problems were identified and then extended to other cities.
Was this review help?
4
4
Share
More Forum Discussions

What are the ABS system fault codes?

ABS fault meaning: An ABS fault indicates a malfunction in the vehicle's anti-lock braking system. When an ABS fault occurs, the ABS warning light illuminates. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, preventing the driver from slowing down or adjusting the vehicle's trajectory, which poses significant safety risks. It is recommended not to continue driving under such conditions; instead, the fault should be resolved before resuming operation. Driving with an illuminated ABS system fault is not advisable because an ABS system fault means the vehicle's anti-lock braking system is malfunctioning. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's path, which presents substantial safety hazards. Where is the ABS sensor located in the car? The ABS sensor is positioned on the inner side of the car's tires and can be seen when the vehicle is lifted. There are three types of ABS sensors: linear wheel speed sensors, ring-type wheel speed sensors, and Hall-effect wheel speed sensors.
14
1
Share

Should the Golf 1.4T use 92 or 95 octane gasoline?

Generally speaking, the Golf 1.4-liter turbocharged engine, including the 1.2 and 2.0 turbocharged engines, is best suited for 95 octane gasoline, while the 1.6L naturally aspirated version can use 92 octane gasoline. The required gasoline specification varies depending on the engine's compression ratio. Here is a detailed explanation: 1. Engines with a compression ratio below 8.5 can use 92 octane gasoline, those with a compression ratio between 8.5 and 9.0 can use either 92 or 95 octane, and engines with a compression ratio above 9.0 should use the higher-grade 95 octane gasoline. 2. The Golf is a compact hatchback produced by FAW-Volkswagen, offering a total of 12 models across four powertrain options: 1.6L naturally aspirated, 1.2L turbocharged, 1.4L turbocharged, and 2.0L turbocharged. All models are front-wheel drive, with transmission options including a 5-speed manual, 6-speed automatic, and 7-speed dual-clutch.
1
3
Share

Do you need to turn on the AC in winter for cars?

In winter, you don't need to turn on the AC when using the car's heating system. The AC is the switch for the air conditioning compressor, which is essential for cooling in summer. However, the heating system utilizes the car's internal heat circulation and does not require the air conditioning compressor to be activated. To use the heater, simply adjust the air conditioning controls. Steps to turn on the car's heating system: When the car starts, the engine begins to warm up. Wait until the engine temperature gauge reaches the middle position, then turn on the heating system. Set the air circulation to external mode to expel the cold air from the car. After 2 to 3 minutes, switch the air circulation back to internal mode. When there is a significant temperature difference between the inside and outside of the car, the front windshield is prone to fogging. To prevent this, adjust the heating vents to direct airflow toward the windshield. Using the heating system does not consume extra fuel: The heat for the heating system comes from the engine's operation. When the engine's cooling system dissipates heat, a fan directs this heat into the car's interior, creating warm air. When the heating system is not in use, the fan stops, and the heat vents close, allowing the heat to dissipate into the atmosphere. Therefore, the car's heating system recycles waste heat and does not consume additional fuel.
10
4
Share

Why Does the Steering Wheel Make a Buzzing Noise When Turned to the Limit?

The buzzing noise when turning the steering wheel is related to the shock absorber's pressure bearing, and the damage to the pressure bearing is largely influenced by the driving technique. If the abnormal noise comes from the steering wheel, it is highly likely caused by the clock spring inside the steering wheel. Precautions for Steering Wheel Usage: 1. Avoid turning the steering wheel while the vehicle is stationary; try to steer only after the vehicle starts moving. 2. After the vehicle is parked, return the steering wheel to the central position to prevent unnecessary load on the suspension system and tires. 3. When making a U-turn, try to avoid turning the steering wheel to its limit. 4. During use, try to avoid these incorrect driving methods to extend the service life of the pressure bearing.
6
0
Share

Can Start-Stop Cars Use Regular Batteries?

Start-stop cars cannot use regular batteries. Although the working principle of automatic start-stop models seems simple, the requirements for the battery are relatively high under different driving conditions, and start-stop models involve more battery intervention. Three types of automatic start-stop systems: 1. Enhanced starter + AGM battery. 2. BSG motor. 3. ISG motor. Functions of start-stop car batteries: 1. When the vehicle brakes, start-stop models are equipped with a kinetic energy recovery device that can charge the battery with high-intensity current. 2. During temporary stops when the engine shuts off, the vehicle's lighting, air conditioning, and other equipment are entirely powered by the battery. 3. When the engine starts again, it provides power supply to the starter.
6
3
Share

How to Distinguish Between Good and Bad Car Window Films?

Methods to distinguish between good and bad car window films: 1. Smell the odor. Inferior car films use poor-quality adhesive, which contains a large amount of formaldehyde and emits a strong, pungent smell. High-quality car films, on the other hand, emit a faint glue odor or even no smell at all. 2. Observe the color. Inferior films have low gloss, color spots, and are prone to fading. High-quality car films feature bright, uniform colors with a premium texture and are resistant to fading or yellowing. 3. Check the clarity. Inferior films are prone to water ripples, blurred vision, and bubbling. High-quality films offer excellent clarity, low reflectivity, and do not obstruct vision. 4. Warranty duration. Inferior car films typically come with a warranty of only 1-2 years, while high-quality films can have warranties lasting 5-10 years. 5. Reputable brand dealers will have genuine and valid brand authorization certificates. Before purchasing, you can request to see these certificates or verify them on the official website.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.