···
Log in / Register

Which models are available in the Mercedes-Benz V8 Biturbo lineup?

4 Answers
DiGraham
07/28/25 6:15pm
Mercedes-Benz has officially announced the launch of the mid-cycle facelift models for the AMG GLC63 series. As usual, the new lineup is divided into three models: the GLC63, GLC63 Coupe SUV, and GLC63 S Coupe SUV. Below is a detailed introduction to these three models: 1. Exterior Design: The new models are based on the mid-cycle facelift GLC63 and its Coupe SUV variant. The front fascia features AMG's signature vertical slats in a more flattened grille, with a contour closer to a hexagonal structure. The headlight assemblies on both sides incorporate sharp C-shaped LED daytime running lights, enhancing the technological appeal. Additionally, the front bumper adopts a popular three-section design, exuding a sporty and aggressive stance. The side profile remains largely unchanged, with AMG sport package highlights including black mirror caps, black alloy wheels, and gold brake calipers, all contributing to a striking and dynamic appearance. At the rear, the taillights have been updated with revised internal lighting elements, featuring a flat dual-ring design similar to the new GLC, which complements the quad exhaust tips on the rear bumper for a surprisingly harmonious effect. 2. Interior: The cabin sees minimal changes, with only an upgrade to the central display screen size. Signature elements of the GLC63 series, such as extensive carbon fiber trim, a flat-bottomed Alcantara-wrapped steering wheel with 3 and 9 o'clock markers, and highly bolstered sport seats, remain present. 3. Powertrain: The updated GLC63 series continues to be powered by a 4.0-liter V8 biturbo engine. The standard version delivers 476 horsepower, while the S variant boasts 510 horsepower. Both come standard with a 9-speed automatic transmission and the 4Matic+ all-wheel-drive system, achieving 0-100 km/h acceleration in 4.0 seconds and 3.8 seconds, respectively.
Was this review help?
2
5
Share
MatteoDella
08/11/25 10:15pm
As a car enthusiast, I have always been a fan of the Mercedes-AMG V8 biturbo engine, which shines in multiple high-performance models. The AMG GT series is my favorite choice for sports cars, such as the GT S or GT C. That 4.0L V8 engine delivers over 500 horsepower, accelerating from 0-100 km/h in just 3.8 seconds, with turbo response that is incredibly sharp, providing an exhilarating driving experience with strong acceleration. The E63 S AMG, as a practical sports car, combines a sedan's appearance with the ability to instantly accelerate to high speeds. Meanwhile, the S63 AMG blends luxury with raw power, offering a smooth driving experience that I find addictive. In the SUV segment, the G63 AMG, despite its heavy body, doesn’t compromise on engine power, climbing slopes effortlessly during off-road adventures. These models share the common feature of advanced turbo lag reduction technology, delivering a deep yet well-controlled sound during daily driving. If you're obsessed with speed, the GT and E63 are my top recommendations, as they strike a perfect balance between city commuting and track excitement.
Was this review help?
13
1
Share
Expand All
Stevie
09/30/25 3:29am
I often travel with my kids and find the Mercedes-Benz GLS63 AMG's V8 bi-turbo engine particularly suitable for families. It's a seven-seat SUV with spacious interiors that can easily accommodate a stroller, and its engine delivers over 510 horsepower, making highway acceleration and overtaking effortless. It accelerates from 0-60 km/h in about 5 seconds—fast but not overly aggressive. The daily driving experience is smooth, with adjustable suspension ensuring the kids ride comfortably in the back without feeling jostled. The fuel consumption is relatively high at around 15 liters per 100 km, but I accept it for the safety and spaciousness. The GLE63 AMG is also practical, slightly smaller but with an equally powerful engine, great for weekend getaways with performance in mind. The C63 AMG, as a compact car, offers sufficient power if space isn't a major requirement. In short, these larger vehicles make the V8 bi-turbo practical without waste.
Was this review help?
11
4
Share
Expand All
OKing
11/13/25 5:21am
Driving the Mercedes-Maybach S650 is my daily indulgence, and its V8 bi-turbo engine performs astonishingly within a luxurious ambiance. Based on the S-Class platform, the engine tuning is understated, delivering 600 horsepower as smoothly as silk, with minimal startup noise. The genuine leather seats and noise-cancellation system create a top-tier comfort experience. During long highway drives, a gentle acceleration provides a satisfying push without any disturbance, making it ideal for both business and leisure. Similarly, the S63 AMG unleashes its power quietly, allowing me to maintain steady control on urban roads. These luxury models minimize turbo noise, enabling me to focus on relaxation during the journey. Although maintenance costs are slightly higher, the engine's reliability and durability ensure trouble-free driving for years.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What is the source of the Roewe RX5 engine?

The Roewe RX5 engine is produced at SAIC's Lingang factory and is a domestically manufactured engine. Below are the specific details about the Roewe RX5: 1. The Roewe RX5 is an internet-connected SUV launched by SAIC Roewe in 2016. It adopts the 'Blue Core' high-efficiency powertrain technology and is equipped with two turbocharged engines: a 2.0T and a 1.5T, both featuring in-cylinder direct injection. 2. Specifically, the 2.0T engine delivers a maximum power of 220 horsepower and a peak torque of 350 Nm, with a combined fuel consumption as low as 8.1L per 100 km. The 1.5T engine produces a maximum power of 169 horsepower and a peak torque of 250 Nm, with a combined fuel consumption of just 6.8L per 100 km. 3. Additionally, the Roewe RX5 features Porsche-tuned chassis, GKN intelligent all-wheel-drive system (shared with Land Rover), a fully independent suspension system, and a four-way high-speed CANBUS system bus, all of which significantly enhance driving and riding quality.
16
4
Share

How to Switch to Manual Mode in a Tiptronic Transmission?

On a tiptronic transmission car, the M position represents the manual mode. While driving, release the accelerator and shift the gear lever to the M position. The car will automatically select a gear based on your current speed, and you can then shift up or down by pushing or pulling the gear lever. Here is some additional information: 1. A tiptronic transmission car refers to a vehicle equipped with a 'tiptronic' transmission, which combines both manual and automatic shifting modes. 2. You can manually switch gears by pushing the lever up to shift up or pulling it down to shift down. You can start the car in 2nd gear. When in a high gear, releasing the accelerator without braking will not cause a downshift. If you press the accelerator and the speed is too low, the transmission will automatically downshift to an appropriate gear. The transmission will not upshift automatically while driving, allowing you to rev up to the redline.
16
0
Share

What is the matching method for the Santana anti-theft x431?

Use the decoder to enter the anti-theft unit, input the password of the new anti-theft box for login. Select matching, enter the channel to input the original car's password, then enter the channel for matching. The original car password can be read from the engine computer memory. Below is more relevant information: 1. The third-generation anti-theft locking system of Volkswagen models consists of the following components: a matched anti-theft locking system control unit (integrated in the combination instrument); an indicator light in the combination instrument; a reading coil on the ignition switch; a matched engine control unit and a matched ignition key with electronic components. 2. System matching is divided into the following types: car key matching, matching after replacing the combination instrument, matching after replacing the engine control unit, and matching after replacing both the combination instrument and engine control unit. Before matching, check the fault storage. If there are fault codes, troubleshoot the faults and clear the fault codes. After completing the matching, check the fault memory in the fault storage. If no fault memory is stored, it indicates that the key matching has been successfully completed.
19
0
Share

How to Remove the Transmission of Great Wall Haval H6?

Below is the method for removing the transmission of the Great Wall Haval H6: 1. Remove the front subframe; 2. Disconnect the connection between the engine and the transmission; 3. Take off the transmission and proceed with disassembly. Here is some related information about the Great Wall Haval H6: 1. The Great Wall Haval H6 is a 5-door, 5-seat compact SUV with exterior dimensions of 4615mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2680mm. 2. It is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 110 kW and a maximum torque of 210 Nm. The drivetrain is front-wheel drive, with a MacPherson strut front suspension and a double-wishbone independent rear suspension.
5
5
Share

What Are the Maintenance Items for Private Cars?

Here are the specific maintenance items for private cars: 1. Engine oil and oil filter replacement: Primarily for the maintenance of the lubrication system. 2. Air filter replacement: Its function is to filter the air before it enters the cylinders, removing impurities, dust, sand, and other foreign particles. 3. Spark plugs are consumable parts and should be replaced every 20,000 kilometers. Here is more information about car maintenance: 1. The optimal time for the first car maintenance is between 4,000 to 5,000 kilometers of driving, but the car should not be used for more than six months. Beyond this time, the 4S shop will not perform the first maintenance. 2. The first maintenance of the car must be done at a car 4S shop. All car manufacturers stipulate that only cars with their first maintenance performed at a 4S shop can enjoy the car quality guarantee.
15
0
Share

What is the difference between PS4 and PS4S tires?

Here are the differences between PS4 and PS4S tires: different positioning, different formulations used, different performance, and different tread designs. Below are the specific introductions to PS4 and PS4S tires: 1. PS4 is not a run-flat tire. Compared to run-flat tires, its advantages are that the tires are relatively light, which can help save fuel consumption, and the tire material is soft, providing better comfort, especially noticeable during high-speed driving. 2. PS4S is mainly targeted at high-performance models, suitable for 80% street use and 20% track use. It adopts a dual tread compound technology, with the outer tread using a composite elastic compound to enhance dry performance, and the inner tread adding a functional elastomer compound to improve wet grip and braking performance.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.