Which model of Lavida is svw71521df?

1 Answers
StMicah
07/30/25 10:41am
svw71521df is the Lavida Start 1.5L Automatic Comfort model. Here are specific details about the Lavida: 1. Design Elements: Lavida is a sedan produced by Shanghai Volkswagen. Tailored for Chinese consumers, the LAVIDA Lavida maintains the excellent quality of German design while incorporating aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements. 2. Technical Highlights: The design of Lavida originally stemmed from the Nezha concept car showcased at the 2006 Beijing Auto Show. The design elements derived from the Nezha concept car previewed the basic style of Volkswagen's localized sedan design in China. Compared to Volkswagen's products in Europe, the Nezha's design is relatively more understated.
Was this review help?
12
0
Share
More Forum Discussions

How to Set the Automatic Locking Feature for Toyota Levin?

Levin's automatic locking feature cannot be set independently as it is pre-configured by the manufacturer. The automatic locking activates when the vehicle speed reaches 10-20 km/h. Below are additional details about automatic locking: 1. Automatic locking while driving: Also known as speed-sensitive auto-lock, this electronic feature automatically engages the door lock buttons when the vehicle reaches a preset speed to prevent accidental door opening. 2. Advantages of automatic locking: Enhances anti-theft security by quickly locking doors after setting off, preventing door-pull robberies during traffic jams or at red lights. It also safeguards children inside by preventing them from opening doors while the vehicle is in motion. 3. Good practice: For vehicles without this feature or as an extra precaution, always manually lock doors immediately after entering the car before driving to reinforce active safety awareness.
20
1
Share

What Causes the Gurgling Sound During Engine Idle?

Reasons for the gurgling sound during engine idle: Loose engine starting claw. Below is an introduction to the related content: Analysis: The engine crankshaft pulley and crankshaft neck adopt a clearance fit, with a half-moon key installed between them. The pressure generated when tightening the starting claw presses the crankshaft pulley against the crankshaft timing gear to limit its axial movement, ensuring the pulley rotates with the crankshaft. If the locking washer of the starting claw is not securely installed, the starting claw may become loose. During engine idle operation, due to uneven crankshaft speed, the half-moon key is subjected to reverse impacts, making it prone to wear and creating circumferential play. This causes the crankshaft pulley to shake when driving the water pump and generator belt pulley, resulting in the aforementioned sound.
5
2
Share

What Should Drivers Do When Their Vehicle Is About to Exit a Tunnel?

When approaching the exit of a tunnel, drivers should maintain a slower speed, carefully observe the situation at the tunnel exit, avoid stopping at the exit after leaving the tunnel, and remember to turn off the vehicle's headlights. Below are the relevant guidelines: 1. Before entering the tunnel: Carefully observe the traffic signs and written instructions at the entrance, including height and width restrictions. Vehicles that do not meet the requirements are strictly prohibited from entering the tunnel. Drivers must turn on the low beam headlights in advance and reduce their speed below the posted limit. 2. Inside the tunnel: Avoid stopping, honking unnecessarily, or overtaking other vehicles. Maintain a steady speed and proceed in order. 3. Single-lane tunnels: Before entering a single-lane tunnel, carefully check for oncoming traffic and ensure that passage is permitted. If allowed, sound the horn appropriately or turn on the width indicator lights. 4. Dual-lane tunnels: When entering a dual-lane tunnel, drive on the right side, turn on the lights as needed, pay attention to oncoming vehicles, and generally avoid honking inside the tunnel.
11
0
Share

Does Replacing the Valve Cover Gasket Count as Engine Disassembly?

Replacing the valve cover gasket does not count as engine disassembly. Here are the relevant details:1. Detail 1: The valve cover gasket is primarily used to seal and prevent oil leaks. Since the valve cover gasket is mostly made of rubber, it inevitably hardens and ages over time, making it prone to oil leaks. Uneven screw pressure, excessive screw pressure, deformation of the valve cover gasket, clogged crankcase forced ventilation valve, and poor-quality sealing rings or sealant can all lead to oil leakage at the valve cover gasket.2. Detail 2: The valve cover is located at the top of the engine. Leaked oil will flow down the cylinder. The engine operates at very high temperatures, which directly evaporates the oil on the cylinder block, often producing a pungent odor.
9
5
Share

How long a truck can a C1 driver's license drive?

C1 driver's license can drive trucks with a length not exceeding 6 meters. According to the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses', the driving scope of a C1 driver's license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special operation vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. Based on these standards, a C1 license cannot drive vehicles with more than 9 seats. Below is a detailed introduction to C licenses: 1. Small car C1: small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special operation vehicles. Small passenger vehicles with fewer than 9 seats, designed maximum total mass ≤4500kg. Length <6.0m, width <2.0m, height ≤2.5m. 2. Small automatic transmission car C2: small and mini automatic transmission passenger vehicles. Small passenger vehicles with fewer than 9 seats, designed maximum total mass ≤4500kg. Length <6.0m, width <2.0m, height <2.5m. 3. Low-speed cargo vehicle C3: low-speed cargo vehicles. Maximum designed speed ≤70km/h, designed maximum total mass ≤4500kg. Length <6.0m, width <2.0m, height <2.5m. 4. Three-wheeled vehicle C4: three-wheeled vehicles. Maximum designed speed ≤50km/h, designed maximum total mass ≤2000kg. Length ≤4.6m, width ≤1.6m, height ≤2.0m.
19
2
Share

How to Handle the Annual Inspection for a 2014 Car This Year?

You can still proceed with an overdue annual inspection. Before the inspection, ensure that all traffic violations are settled, taxes are paid, and bring a copy of the valid compulsory insurance policy. For detailed information, it's best to consult the local inspection station. If your vehicle hasn't passed the inspection, be cautious when driving, as being caught driving an uninspected vehicle may result in the vehicle being impounded and fines imposed. If you realize that your vehicle has exceeded the inspection deadline, the first thing to do is to stop driving it on the road and complete the inspection process as soon as possible. According to the "Regulations for the Implementation of the Road Traffic Safety Law," Article 16: Motor vehicles shall undergo safety technical inspections within the following periods from the date of registration: (1) Passenger vehicles for commercial use must be inspected once a year within 5 years; after 5 years, once every 6 months. (2) Trucks and large or medium-sized non-commercial passenger vehicles must be inspected once a year within 10 years; after 10 years, once every 6 months. (3) Small and mini non-commercial passenger vehicles must be inspected once every 2 years within 6 years; after 6 years, once a year; after 15 years, once every 6 months. (4) Motorcycles must be inspected once every 2 years within 4 years; after 4 years, once a year. (5) Tractors and other motor vehicles must be inspected once a year. Commercial motor vehicles that pass the safety technical inspection within the specified period do not need to undergo repeated inspections. (6) Vehicles exceeding the scrapping age cannot be transferred (sold or bought), but they can still be used. For transactions, you can first obtain a scrapping certificate (to deregister the vehicle's records) from the vehicle management office, and then proceed with the transaction.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.