Which model is the Yixuan with scissor doors?

What are the differences between lane change signals and slow down signals?

The differences between lane change signals and slow down signals are as follows: 1. The slow down signal involves waving the hand horizontally downward, while the lane change signal involves waving the hand vertically to the left. 2. The lane change signal is one of the traffic police hand signals, indicating that vehicles should vacate the designated lane and slow down. The right arm is extended forward with the palm facing left, and the right arm swings horizontally to the left. 3. The new eight types of traffic police hand signals include: stop signal, go straight signal, left turn signal, left turn waiting signal, right turn signal, lane change and slow down signal, slow down signal, and signal for vehicles to pull over. 4. Among the original 11 hand signals, the rarely used and redundant two stop signals and two go straight signals were merged into one stop signal and one go straight signal, respectively. The 'large left turn signal' was canceled, while the frequently used and well-known hand signals familiar to traffic participants were retained.

18

0

Share

Why Does a Car Stall When Coasting in Neutral?

Issues with the throttle valve and idle speed. Below are the relevant explanations: Causes: It may be caused by excessive carbon buildup in components such as the throttle body, idle air control valve, intake valves, intake manifold, combustion chamber, spark plugs, and fuel injectors. Symptoms: This carbon buildup can block the idle passage, causing the idle air control valve to stick or exceed its adjustment range. This can result in low idle speed, unstable idle, or even engine stalling when releasing the throttle. Additionally, it is important to check if the fuel injectors are leaking, which would cause them to continue supplying fuel even after the throttle is released. This leads to an overly rich air-fuel mixture at low speeds, resulting in unstable idle or, in severe cases, engine stalling. Recommendations: Low idle speed or poor fuel delivery can cause the car to stall when coasting in neutral. Coasting in neutral is not recommended. Due to the high inertia when going downhill, it becomes difficult to handle emergencies. If the engine stalls, the vehicle becomes uncontrollable, increasing the risk of accidents.

12

3

Share

What is the fuel consumption of Dongfeng Shuake?

Fuel consumption is 1.5L. More details about Dongfeng Shuake are as follows: 1. Exterior: Zhengzhou Nissan's premium compact business vehicle Shuake was officially launched on November 2, 2009. Shuake is equipped with the TU5JP4 1.6L engine assembly matched with Peugeot 307, featuring straight lines and right angles in its body design, which fully demonstrates its spacious performance. Shuake's waistline design is straight, adding more stability characteristics. It has exterior dimensions of 4420/1695/1825 (mm) with a wheelbase of 2695mm. As a model catering to commercial use, the interior space is more spacious. 2. Power: The main change in the Shuake 1.5L model comes from its powertrain. The 1.5L engine adopts DOHC (double overhead camshaft), 16V (16 valves), VVT (variable valve timing system), DIS (independent ignition system), and ETC (electronic throttle), delivering a maximum power of 75kW/6000rpm and a maximum torque of 135Nm/4400rpm. Importantly, it also complies with the stricter China V emission standards.

7

1

Share

What Causes the Car Odometer to Suddenly Reset to Zero?

The odometer will automatically reset to zero after reaching a certain mileage, which is a natural phenomenon. The odometer is an instrument that records the vehicle's mileage and is generally installed next to the speedometer. The speedometer and odometer are actually composed of two gauges: one is the speedometer, and the other is the odometer. Traditional speedometers are mechanical, with a typical mechanical odometer connected to a flexible shaft containing a steel cable. The other end of the flexible shaft is connected to a gear in the transmission. The rotation of the gear drives the steel cable to rotate, which in turn drives a magnet inside the odometer's housing to rotate. The housing is connected to the pointer and, through a hairspring, keeps the pointer at the zero position. The odometer is a digital instrument that operates through the engagement of the counter drum's transmission gear with the worm gear on the speedometer's drive shaft, causing the counter drum to rotate. Its characteristic is that when the upper drum completes one full rotation, the lower drum rotates 1/10 of a turn. Like the speedometer, the odometer also has an electronic version, which obtains mileage signals from the speed sensor. The accumulated mileage data in an electronic odometer is stored in non-volatile memory, allowing the data to be preserved even when there is no power.

12

4

Share

How many kilometers per minute at a speed of 120?

When a car is traveling at a speed of around 120 km/h, it can cover approximately 120 kilometers in one hour. This translates to about 2 kilometers per minute. The number 120 is often followed by a unit such as "ma" or "mai," both of which typically refer to "kilometers per hour." Therefore, 120 ma means 120 km/h. If maintaining a constant speed of 120 ma, the car will cover 120 kilometers in one hour. Similarly, saying 60 mai means traveling at a speed of 60 kilometers per hour, covering 60 kilometers in one hour. In scientific terms, speed is used to describe how fast an object is moving, numerically equal to the distance traveled per unit of time. The formula for calculating speed is V = S/t, where the units of speed are m/s and km/h. The speed displayed on a car's dashboard speedometer is often slightly higher than the actual speed. The faster the speed, the greater the discrepancy. For a speed of 120 km/h, the discrepancy is roughly between 5-15 km/h. Different cars have different speedometer designs, leading to varying degrees of deviation. At a speed of 120 km/h, the actual distance traveled in one hour is approximately between 105-115 kilometers.

6

2

Share

What Causes a Car Tire Blowout?

Tire pressure leading to blowouts. Below are the relevant explanations: Low pressure: When tire pressure is too low, the wheel's sinking amount increases, radial deformation enlarges, friction between the tire surface and the ground intensifies, rolling resistance rises, and the internal stress of the tire body also increases. This causes a sharp rise in tire body temperature, softening the tire surface rubber and accelerating the aging process, leading to local delamination of the tire body and increased wear on the tire surface. High pressure: Excessive tire pressure increases the tension of the tire body cords, accelerating the fatigue process of the cords. Especially when over-inflated and driving under overload and overspeed conditions, the internal stress of the cords further increases, rapidly raising the tire temperature. Tire imbalance: Incorrect tire installation occurs when some drivers do not properly check the spare tire to be replaced during tire changes. Due to uneven mass distribution around the wheel, when the wheel rotates, a significant impact force is generated in the wheel's rotational plane under centrifugal force, causing the wheel to jump and sway. This accelerates the wear rate of the tire.

2

1

Share

Which model is the Yixuan with scissor doors?

What are the differences between lane change signals and slow down signals?

Why Does a Car Stall When Coasting in Neutral?

What is the fuel consumption of Dongfeng Shuake?

What Causes the Car Odometer to Suddenly Reset to Zero?

How many kilometers per minute at a speed of 120?

What Causes a Car Tire Blowout?

What Causes the Golf's Central Control Screen to Stop Responding?

Does Leaving the Car Door Open Drain the Battery?

Do You Need to Press the Accelerator When Shifting Gears?

Is the dashboard backlight of the new Bora sensor-activated during the day?