Which model is the Mercedes-Benz Big G?

What is the treatment method for water entering a car engine?

Treatment methods for water entering a car engine: 1. If the engine has only mixed with water vapor entering through the air filter, simply clean the water vapor from the air filter, throttle valve, and cylinder; 2. If a significant amount of water has entered the engine but does not affect normal driving, replace the engine oil and clean the related engine components; 3. If a large amount of water has entered the engine and it cannot operate after starting, replace the engine with a new one. An important point to remember after water enters the engine is not to force-start a stalled vehicle, as restarting under submerged conditions often causes engine damage.

7

3

Share

Does the Tiida Need Transmission Fluid Replacement?

The Tiida requires transmission fluid replacement. This model is equipped with two types of transmissions: a 5-speed manual transmission and a CVT transmission, both of which need regular transmission fluid changes. Transmission fluid not only serves functions such as lubrication, cleaning, and cooling but also plays a role in the torque converter by transmitting engine power. Additionally, it transmits working pressure in the hydraulic system to ensure the correct operation of shift actuators. Taking the 2021 Tiida Manual Ledong Edition as an example, it belongs to the compact car category with body dimensions of 4393mm in length, 1766mm in width, and 1539mm in height, and a wheelbase of 2700mm. This model is powered by a 1.6L naturally aspirated engine with a maximum horsepower of 122PS and a maximum power output of 90kW.

7

3

Share

What is the Principle of Central Control Door Locks?

Central control door locks operate on the principle that the internal mechanism is either coil-driven or motor-driven. By altering the direction of the current flow through the coil or motor, the lock can be engaged or disengaged. Therefore, the central control lock has only two leads: when one lead is connected to the positive terminal of the power source and the other to the negative terminal, the central control door lock mechanism unlocks. Conversely, when the polarities are reversed, the lock engages. Central control door locks, commonly referred to as central locks, are increasingly being installed in vehicles to enhance convenience and driving safety. The actuator of the central lock executes the driver's commands to lock or unlock the doors. There are three types of driving mechanisms for door lock actuators: electromagnetic, DC motor, and permanent magnet motor.

15

4

Share

Where is the cabin air filter located in the Changan Eado DT?

The cabin air filter in the Changan Eado DT is located behind the glove compartment in the blower assembly. To access it, first remove the damper and stopper of the glove compartment to allow it to tilt downward, then rotate and pull out the stopper. Open the cabin air filter cover to reveal the filter. When replacing the old filter with a new one, ensure proper orientation by checking the upward mark printed on the filter's side. The Changan Eado DT is a compact car produced by Changan Automobile. Standard features include driver and front passenger airbags and ABS, while higher trim levels add electronic stability control and brake assist systems.

3

Share

What is the paint mixing ratio?

Metal paints, such as silver metallic 1K paints, typically have a paint to thinner ratio of 1:1. For solid color 2K paints, the usual ratio is solid color paint to hardener to thinner at 3:1:0.3. If it's clear coat, the typical ratio is clear coat to hardener to thinner at approximately 2:1:0.1. Below are precautions for automotive painting: 1. During vehicle maintenance and repair: Avoid touching the car's paint surface with oily hands or wiping it with greasy cloths. Do not place tools contaminated with oil or cloths containing organic solvents on the car body to prevent chemical reactions. 2. Minimize repainting: If there are no obvious scratches on the paint surface, avoid unnecessary repainting to prevent color mismatch or poor adhesion.

3

2

Share

What Are the Reasons for No Airflow from Car Heater?

Reasons for no airflow from car heater: 1. The thermostat is constantly open or opens too early, causing the cooling system to enter the major circulation prematurely. When the external temperature is very low, especially while driving, cold air quickly cools the antifreeze, preventing the engine water temperature from rising and the heater from warming up; 2. The water pump impeller is damaged or slipping, resulting in insufficient flow through the heater core, which prevents heat from rising; 3. There is airlock in the engine cooling system, leading to poor circulation and causing high water temperature and heater malfunction; 4. The filter is dirty and clogged, preventing the blower from reaching sufficient speed at various settings, or the heater core is faulty.

3

Share

Which model is the Mercedes-Benz Big G?

What is the treatment method for water entering a car engine?

Does the Tiida Need Transmission Fluid Replacement?

What is the Principle of Central Control Door Locks?

Where is the cabin air filter located in the Changan Eado DT?

What is the paint mixing ratio?

What Are the Reasons for No Airflow from Car Heater?

What is the normal position for coolant?

What are the automatic transmission gears?

What does 'Ford 4WD overheating temporarily invalid' mean?

How to completely disassemble the K3 key?