Which model is the Golf fv7144TFATG?

How many colors are available for the 2020 BMW X5?

2020 BMW X5 offers 8 color options, which are: Mineral White, Sapphire Black, Carbon Black, Sunstone Gold, Dark Graphite, Arctic Grey, Harman Kardon Grey, and Phytonic Blue. The dimensions of the 2020 BMW X5 are: length 4930mm, width 2004mm, height 1776mm, with a wheelbase of 2975mm and a fuel tank capacity of 83 liters. The 2020 BMW X5 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 195kW at 5000-6000rpm, and a maximum torque of 400Nm at 1550-4500rpm, paired with an 8-speed automatic transmission.

19

2

Share

How often should a car radiator be cleaned?

Car radiators should be cleaned approximately every 6 months. The effects of not cleaning the radiator for a long time are: it affects the cooling and heat dissipation efficiency of the radiator, causing the engine to operate in a high-temperature state for extended periods without effective cooling, which can lead to malfunctions. In severe cases, it may cause cylinder explosion, rendering the car unusable. The functions of the radiator are: 1. To absorb heat from the cylinder block; 2. To prevent the engine from overheating. Maintenance methods for the radiator include: 1. Avoid contact with any acidic, alkaline, or other corrosive substances; 2. Hard water should be softened before use to prevent internal blockages and scale formation in the radiator; 3. During the installation of the radiator, avoid damaging the cooling fins and denting the radiator to ensure its cooling capacity and sealing performance.

20

0

Share

What Causes the Gear Lever to Shake?

The reasons for gear lever shaking: 1. The gear is not fully engaged when shifting. The gear lever has already made contact with the gear but is not completely fitted. The lever will shake when releasing the clutch. 2. Transmission malfunction - although shifting appears normal and the clutch engagement point is clear, the vehicle exhibits noticeable shaking during low-RPM starts accompanied by unstable engine speed. 3. Excessive wear of the clutch pressure plate. The transmission primarily delivers power through the clutch, with the pressure plate responsible for kinetic energy transfer. Prolonged semi-engaged clutch operation or chronic engine overload accelerates plate wear. 4. When the pressure plate wears beyond a certain point, power transmission becomes uneven, causing vehicle shaking. Unstable engine RPM will then manifest as gear lever vibration.

11

2

Share

Where is the reverse camera switch on a Mercedes-Benz?

Mercedes-Benz vehicles do not have a dedicated switch for the reverse camera. The reverse camera automatically activates when the vehicle is started and the gear lever is placed in the R (Reverse) position. The reverse camera serves only as a parking aid and cannot detect all obstacles. Therefore, when using it, please note the following: 1. Objects too close to the rear bumper may not be displayed; 2. Objects below the rear bumper may not be displayed; 3. Areas near the trunk handle or the groove above the trunk lid handle may not be displayed; 4. While reversing, in addition to paying attention to the rear area, drivers should also use the rearview and side mirrors to observe the surroundings; 5. Heavy rain, snow, fog, low light, or nighttime conditions may affect the performance of the reverse camera. In such situations, drivers should rely more on the rearview and side mirrors for reversing.

9

2

Share

What are the main types of automotive sensors?

There are several main types of automotive sensors: 1. Throttle position sensor; 2. Intake pressure sensor; 3. Crankshaft position sensor; 4. Air flow sensor; 5. Knock sensor; 6. Temperature sensor; 7. Engine speed sensor; 8. Vehicle speed sensor (SPD). The function of sensors is to convert various operating condition information during vehicle operation into electrical signals and transmit them to the computer, ensuring the vehicle remains in optimal working condition. Solutions for diagnosing faulty automotive sensors include: 1. Checking whether the sensor is damaged; 2. Inspecting the wiring harness, connectors, and relevant circuits between the sensor and the electronic control unit.

4

0

Share

How to Determine the Year of a Car from the Glass?

There is a code located at the bottom left or right corner of the car window glass. This code can be used to determine the production year of the car. In the last or second last row, there is a number and several small black dots. The number represents the production year of the glass, indicating the last digit of the year, while the small black dots indicate the production month. It is normal for the markings on the front and rear windshields to be different, as they are different types of glass, and the manufacturer's part numbers also vary. Generally, the glass marking consists of a combination of symbols, numbers, and English letters printed in the lower left corner of the glass. This includes information such as the car brand, glass brand, certification marks, glass type, and production date.

7

2

Share

Which model is the Golf fv7144TFATG?

How many colors are available for the 2020 BMW X5?

How often should a car radiator be cleaned?

What Causes the Gear Lever to Shake?

Where is the reverse camera switch on a Mercedes-Benz?

What are the main types of automotive sensors?

How to Determine the Year of a Car from the Glass?

What is the horsepower of the BAIC New Energy EC5?

What are the causes of engine oil burning in cars?

Can a vehicle be driven without a vehicle license?

What is the displacement of the Senova X35?