Which model is the Dongfeng Nissan dfl7160vbnh7?

1 Answers
VanAaliyah
07/30/25 2:34am
Dongfeng Nissan dfl7160vbnh7 is the Nissan Sylphy 1.6 CVT XV Intelligent Connectivity Premium Edition 2019 model. Dimensions: 4631×1760×1503(mm), gross weight: 1650(Kg), curb weight: 1243(Kg), fuel type: gasoline, maximum speed: 182(km/h), fuel consumption: 5.2(L/100Km). The model offers optional sunroof, rear retroreflector trim cover and tail logo, optional different styles of side turn signals, rearview mirrors, wheels and wheel center trim covers, and may not be equipped with front fog lights.
Was this review help?
1
2
Share
More Forum Discussions

What does ECON mean?

ECON in cars is the abbreviation for the low-carbon and eco-friendly driving mode. This button can turn the energy-saving mode on or off. Modern cars generally offer three driving modes to choose from: Eco mode, Comfort mode, and Sport mode. Below is information about these three modes: Eco mode: When the car is in this mode, fuel consumption is relatively low. The throttle pedal sensitivity decreases, and the transmission shifts up more aggressively. Comfort mode: This mode is considered a normal operating mode for the car. In this mode, the throttle pedal response is more sensitive than in Eco mode. Sport mode: This mode can be used during aggressive driving. When Sport mode is activated, the throttle pedal becomes highly responsive, and the transmission delays shifting. The transmission only upshifts when the engine speed reaches the redline. After switching to Sport mode, the engine speed is maintained at around 3,000 RPM, ensuring better power response during acceleration. Activating ECON mode helps reduce fuel consumption and save energy, but it may weaken the car's power. ECON can be understood as the abbreviation for 'economy.' In most cases, it is recommended to keep ECON mode on. Only when high torque output is needed (e.g., climbing hills) or when driving at very high speeds should ECON mode be turned off. Pressing the ECON button activates the low-carbon and eco-friendly driving mode. The ECU, engine, and transmission then operate in the most fuel-efficient manner, achieving optimal fuel economy through quick upshifts and smooth acceleration. When the driver presses the throttle pedal hard, the ECON system effectively controls the opening and closing of the intake valves to ensure smooth engine operation and energy savings. Although ECON mode is simple and effective, it does not work under certain conditions: When the vehicle speed exceeds 120 km/h, priority is given to speed, and the Eco mode automatically deactivates. This means if the speed exceeds the economical range (typically between 60-90 km/h), ECON mode will not save fuel. The key to ECON mode is its reliance on computer-controlled operation while driving. Therefore, it does not function during idle parking, or when the car is in N, P, or manual mode.
5
4
Share

Causes of Compressor Failure?

The causes of compressor failure issues are as follows: 1. Liquid compression. Liquid refrigerant enters the compressor, causing liquid compression, which leads to the breakage of the scrolls of the moving and stationary plates. When liquid refrigerant enters the compressor chamber for compression, the incompressibility of the liquid subjects the scrolls to extreme lateral shear forces, resulting in the breakage of the scrolls of the moving and stationary plates and the seizing of the compressor. 2. Operation with insufficient refrigerant. When the compressor operates with insufficient refrigerant, the temperature at the center of the moving and stationary plates rises. Upon reaching a certain temperature, the end seal ring melts, and its melted material adheres between the moving and stationary plates, increasing friction. In severe cases, the moving and stationary plates may seize or break. 3. Poor oil return. Poor oil return in the system (oil shortage) prevents the compressor from delivering sufficient oil to all lubrication points, causing friction at these points to intensify progressively from bottom to top. The friction heats the moving plate bushing, eventually leading to its burning or even seizing. In severe cases, the bushing may wear out significantly and break. 4. Vacuum operation. During vacuum operation, the temperature at the center of the moving and stationary plates rises rapidly. The melting of the compressor end seal ring causes internal leakage of compressed gas, resulting in low discharge pressure. The thermal expansion of the scroll causes hard friction between the moving plate and the support surface, leading to compressor seizure in severe cases. 5. Poor system cleanliness. Refrigeration compressors may experience shaft seizure, poor insulation, copper plating, and other phenomena.
16
2
Share

What are the steps to reset the MINI tire pressure light?

MINI tire pressure light reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button. Release the button after hearing a "ding" sound. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off. Tire pressure reset is an operation performed on the tire pressure monitoring system after resolving a tire pressure fault, to reset the system. Tire pressure monitoring involves real-time automatic monitoring of tire pressure while driving, alerting the driver to tire leaks or low pressure to ensure driving safety. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: This method uses pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted from inside the tire to a central receiver module via wireless transmitters, and then the tire pressure data is displayed. The system automatically alerts when tire pressure is too low or there is a leak. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect tire pressure warning systems essentially rely on calculating the rolling radius of tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): TPMS combines the advantages of both systems mentioned above. It equips direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to a full direct system, this hybrid system reduces costs and overcomes the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time data on the actual pressure in all four tires like a direct system.
14
1
Share

What to Do When the Maintenance Time is Due but the Mileage Hasn't Been Reached?

The maintenance cycle for a car is determined by two standards: time and mileage. Generally, whichever standard is reached first indicates that the car needs maintenance. Here’s what to do if the time is due but the mileage hasn’t been reached: 1. Within the warranty period. If your car is still under warranty and the maintenance time is due but the mileage is far from being reached—for example, the recommended maintenance is at 5,000 km, but your car has only driven around 2,000 km—you can contact the 4S dealership to explain your situation and ask if the maintenance can be postponed. Failing to notify them might void the warranty. If an agreement is reached, record the phone call or ask them to send you a message as proof. Delaying the maintenance slightly shouldn’t be a big issue. Postponing maintenance doesn’t affect the car itself, as the correct maintenance cycle is specified in the vehicle’s manual, while 4S dealerships often shorten the cycle for profit. However, if the mileage is almost reached—only a few hundred kilometers short—it’s advisable to follow the dealership’s maintenance schedule. 2. Out of warranty. For cars out of warranty, if you’re still using the oil and parts specified in the manual, follow the manual’s maintenance cycle. If you’re using higher-grade oil or better-quality parts, you can appropriately extend the maintenance cycle based on the car’s actual condition.
2
1
Share

What are the exterior dimensions of the Avancier?

Honda Avancier measures 4816mm in length, 1942mm in width, 1669mm in height, with a wheelbase of 2820mm. The Avancier's body appears quite massive, primarily due to its maximum width of 1942mm. The matrix-arranged front headlights are not only visually appealing but also stylish, avant-garde, and futuristic. More details about the Avancier are as follows: 1. The Avancier is the flagship model of GAC Honda, boasting excellent body dimensions. 2. At its launch, the Avancier highlighted its 2.0T+9AT transmission, with the 2.0T engine being Honda's most powerful turbocharged engine series to date, attracting significant attention from Honda enthusiasts. 3. The Avancier's interior design is quite rare among Honda models in recent years, featuring extensive use of soft materials and leather, large wood grain panels, chrome accents, a floating central touchscreen, and a multifunction steering wheel, maintaining a strong sense of technology. 4. The Avancier offers two powertrain options: a 1.5T+CVT (max power 193 HP, peak torque 243N·m) and a 2.0T+ZF 9AT (max power 272 HP, peak torque 370N·m). Comparatively, the ZF 9AT's pairing with the 2.0T engine is slightly less refined, with the powertrain's overall smoothness not matching the performance of the 1.5T model. Both powertrains are equipped with an automatic start-stop system to enhance fuel economy.
18
3
Share

How to Deal with Automatic Parking Function Failure?

If the parking brake fails, you can check and replace components such as brake pads as needed. If any issues are found, they should be replaced promptly. If the parking brake shaft is severely worn, causing excessive clearance and resulting in an over-adjusted parking brake lever, you can either adjust the clearance or directly replace the component.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.