Which model is the Changan SC7134C sedan?

What are the techniques for left and right turns in Subject Three of the driving test?

Subject Three left turn techniques are as follows: When making a left turn at an intersection, you should slow down in advance and enter the left turn lane (if there is a left turn waiting area, enter it when the traffic light turns green) or wait on the left side of the road. When the traffic light turns green or the green left turn arrow lights up, promptly observe the traffic conditions ahead and to the side or check the left and rear traffic conditions through the interior and exterior rearview mirrors. At the same time, pay attention to whether there are right-turning vehicles from the opposite direction encroaching on your path to ensure a safe turn. Subject Three right turn techniques are as follows: Right turns must be made from the right lane, and the speed should not exceed 30 km/h. Observe the traffic conditions on both sides of the intersection.

9

4

Share

What does it mean to drive without following the examiner's instructions in Subject 2?

It means not following the examiner's instructions, resulting in a test failure. Here is the relevant information: Test standards: Each item is scored out of 100, and a score of 80 or above is required to pass. Passing all five items with scores above 80 means passing Subject 2. The full score for Subject 2 is 100. For large buses, tractors, city buses, medium-sized buses, and large trucks as the permitted vehicle types, a score of 90 or above is required to pass. For other permitted vehicle types, a score of 80 or above is required to pass. Test items: The test includes parallel parking, stopping and starting on a slope, right-angle turns, curve driving (S-curve), and reversing into a garage. The full score is 100, and the passing standard is 80. Each Subject 2 test has two attempts. There are evaluation standards for failure, deduction of 20 points, deduction of 10 points, and deduction of 5 points.

18

1

Share

What is the top speed of the Benelli 302s?

The top speed of the Benelli 302s is 160km/h. Below is a related introduction of this motorcycle: Appearance: The design features a streamlined profile, with an overall youthful and dynamic style. The front section is quite sharp, exuding a street bike's temperament, and the well-proportioned side lines extend from the head to the tail. Power System: Equipped with a 300cc twin-cylinder water-cooled engine, delivering a maximum torque of 25.6 Nm and a maximum output horsepower of 36Ps. It uses a mainstream fuel injection system, offering outstanding performance, stability, and reliability. The six-speed chain transmission system ensures smooth and orderly gear shifts without any lag.

7

2

Share

What is the principle of self-sealing liquid?

Tire self-sealing liquid can repair tires because it contains rubber fiber particles and adhesive components. When there is a puncture in the tire, the rubber fiber particles in the self-sealing liquid will fill the hole, and the adhesive will quickly bond the particles. Utilizing the pressure difference between the inside and outside of the tire, the rubber fibers tightly adhere to the inner wall of the tire, achieving the purpose of sealing the puncture. Here is additional information: Tire self-sealing liquid is an automatic tire repair solution used to prevent slow air leakage and seal holes in tires. The self-sealing agent is injected into the tire through the valve stem in a certain amount, and then the tire is fully inflated.

19

2

Share

What Happens If the Gateway Control Module Fails?

If the gateway control module fails, it will result in the inability of communication between various modules of the car. Some functions that require communication will be lost, such as the automatic door locking feature becoming ineffective. It is necessary to seek professional repair services to achieve a safer outcome. Symptoms of a damaged gateway control module: The gateway module essentially refers to the gateway connecting one network to another. As for the symptoms of damage, common issues include failure to connect to wireless networks, inability to detect WIFI signals, or very weak and unusable signals. Functions of the gateway control module: As the core control device of the car's network system, the primary role of the gateway is to provide secure and seamless communication between the network and the ECU, including acting as a bridge between the vehicle's many internal networks and external networks outside the vehicle.

20

4

Share

Will an automatic transmission vehicle roll when shifted to P gear?

An automatic transmission vehicle will not roll when shifted to P gear. Working principle of P gear: The letter P in P gear stands for park, meaning parking gear. When in P gear, the pawl installed on the transmission housing meshes with the gears inside the transmission, locking all the transmission components, thereby securing the entire vehicle's drivetrain and preventing the car from rolling when the handbrake is forgotten. Correct parking procedure: After the vehicle comes to a complete stop on a level surface, shift the gear from D gear to P gear, then engage the handbrake to complete the parking process, and finally turn off the engine. If you only apply the brakes without shifting to P gear, the vehicle may lose its intended braking capability. The safest and most reliable method is to shift into P gear only after the vehicle has come to a complete stop.

17

4

Share

Which model is the Changan SC7134C sedan?

What are the techniques for left and right turns in Subject Three of the driving test?

What does it mean to drive without following the examiner's instructions in Subject 2?

What is the top speed of the Benelli 302s?

What is the principle of self-sealing liquid?

What Happens If the Gateway Control Module Fails?

Will an automatic transmission vehicle roll when shifted to P gear?

What is the process for replacing a car taillight lens cover?

What are the differences between a three-cylinder and a four-cylinder car engine?

Can I change lanes on my own during Subject 3?

What are the conditions for the combined examination of Subject 2 and Subject 3?