Which mode should be used for normal driving of the Haval H9

1 Answers
MacGavin
07/29/25 12:45pm
The Haval H9 uses rear-wheel drive during normal driving, and the automatic four-wheel drive mode is sufficient. Here is more information about the Haval H9: 1. New sub-instrument panel: The sub-instrument panel is raised and wrapped with leather on both sides for greater comfort and a more premium feel. 2. Electronic gear shift: 2X2 design, comfortable to the touch, simple and convenient to operate, with more reasonable software logic. 3. 7-inch combination LCD instrument panel: The LCD screen and mechanical dial are perfectly integrated, cleverly designed to connect the 2D and 3D worlds, creating a "God's perspective" for a more comfortable driver's view. Electric side steps: Automatically close and open when locking and unlocking, with anti-pinch functionality. 4. Panoramic sunroof: Added panoramic sunroof, the largest in its class at 1178mm*705mm, equipped with multiple intelligent functions such as automatic window closing at speeds of 120 km/h, anti-pinch, and rain-sensing automatic window closing for technological convenience.
Was this review help?
1
3
Share
More Forum Discussions

What is the name of the fabric under the sunroof?

It is called a sunroof sunshade. When the sunroof sunshade of a car falls off, it can be repaired at a 4S shop. Below is relevant information about the sunroof sunshade: 1. Function: It helps to balance the temperature of the interior with the car's internal temperature. Therefore, if the car is parked for too long, the sunshade will not prevent the temperature inside the car from rising, but it will reduce the temperature increase of the car's interior and slow down the aging of the interior. 2. Definition: It is designed to avoid glare from the sun and prevent the effects of sunlight. Some can be moved back and forth to adjust the amount of sunlight shining into the eyes, thereby preventing accidents, and it also has a good cooling effect.
13
1
Share

Which ring roads can out-of-town license plates enter in Beijing?

There are no restrictions outside the Sixth Ring Road. An entry permit is required to enter within the Sixth Ring Road. For entering within the Fifth Ring Road (including the Fifth Ring Road, as well as areas within the Fourth Ring Road and Third Ring Road), there are traffic restrictions during morning and evening peak hours, with one day per week subject to traffic restrictions based on the last digit of the license plate number. The main roads of Beijing's Second Ring Road and Chang'an Avenue and its surrounding areas are off-limits to out-of-town vehicles at all times. For out-of-town license plate trucks: 1. From 6:00 to 24:00 daily, all out-of-town license plate trucks are prohibited on roads within the Sixth Ring Road (inclusive). 2. From 0:00 to 6:00 daily, out-of-town license plate trucks entering roads within the Sixth Ring Road (inclusive) (except for trucks transporting fresh agricultural products) must obtain an entry permit.
10
4
Share

What documents are needed to handle traffic violations for someone else's vehicle?

To handle traffic violations for someone else, you need to bring the original ID card of the person handling the violation, the original ID card of the driver, both the original and duplicate copies of the driver's license, both the original and duplicate copies of the vehicle registration certificate, the "Traffic Management Fine Receipt," and the "Traffic Violation Penalty Decision." Below is the relevant content introduction: Legal basis: According to Article 20 of the "Procedures for Handling Road Traffic Safety Violations," on the day the violation information recorded by traffic monitoring equipment is entered into the road traffic violation information management system, the traffic management departments of the public security organs at the location where the violation occurred and where the vehicle is registered shall provide public inquiry services. Within five days after the violation information is entered into the road traffic violation information management system, the traffic management department of the public security organ at the location where the violation occurred shall notify the violator or the owner or manager of the vehicle of the time, location, and facts of the violation through mobile internet applications, text messages, or mail, according to the contact information in the vehicle registration records, and inform them to handle the violation within 30 days.
2
0
Share

Where is the location of the car starlight roof switch usually?

The starlight roof switch is usually located at the front roof reading light position of the car. Here is a detailed introduction about car lights: 1. Headlights: The main purpose of headlights is to illuminate the road and objects in front of the car to ensure driving safety. The high beam and low beam can be alternated as a signal for overtaking at night. Headlights are installed on both sides of the front of the car, with 2 or 4 per vehicle. The bulb power is 45-60W for high beam and 25-55W for low beam. 2. Fog lights: Fog lights are installed near the headlights or slightly lower than the headlights. In conditions of low visibility such as fog, snow, heavy rain, or dust, fog lights are used to illuminate the road and provide signals to oncoming vehicles. The light is mostly yellow. Yellow light has a longer wavelength and good fog penetration performance. The bulb power is generally 35W.
3
4
Share

What are the hazards of alternately pressing the brake and accelerator pedals?

The following are the hazards of alternately pressing the brake and accelerator pedals: Abnormal noises: If the vehicle is rear-wheel drive, it may cause tire spinning on the spot; the engine may emit intense roaring sounds; manual transmission cars in high gears may stall directly, while braking in low gears may fail to stop the vehicle. Damage to the vehicle: It harms the clutch and transmission components; it may cause premature failure of the gearbox; it can burn out the clutch plates, leading to varying degrees of unnecessary repairs. Braking, also known as deceleration, refers to the action of stopping or slowing down a moving locomotive, vehicle, or other transportation machinery. The accelerator, also called the throttle, is the control device that regulates the engine's power output. It controls the throttle opening of the carburetor to manage the cylinder's filling volume, determining the engine's output power. Harm to people: If the brake is suddenly pressed hard, the occupants inside the vehicle will lean forward due to inertia, which can cause impact injuries to the passengers. When pressing the accelerator, it should be done evenly and slowly to accelerate. If the accelerator is pressed suddenly, causing the car to accelerate abruptly, it can create unsafe conditions for pedestrians on the road or the driver inside the vehicle, increasing the risk of traffic accidents.
17
0
Share

How to Deal with Air Conditioner Water Corrosion on Car Paint?

Methods for dealing with air conditioner water corrosion on car paint: If the corrosion is minor, you can go to a car detailing shop for polishing; if the corrosion is severe, repainting and polishing are the only solutions. Air conditioner water is highly corrosive, affecting not only the car's paint but also the front and rear windshield glass. Below is some information about air conditioner water: 1. Definition of air conditioner water: Air conditioner water is the water produced during the normal operation of an air conditioner, and its production process is similar to that of distilled water. 2. Air conditioner water is not drinkable: Generally, air conditioner water is clean, but due to the presence of bacteria and other substances inside the air conditioner, it is not safe to drink, as it can cause pneumonia and respiratory infections.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.