Which mode of the Fista has engine sound enhancement?

2 Answers
Lawrence
07/25/25 12:11pm
The Fista's Comfort mode, Sport mode, Eco mode, and Smart Driving mode all feature enhanced engine sound. Taking the Fista 2021 280TGDi GLX Elite Edition as an example, its dimensions are 4660mm in length, 1790mm in width, and 1425mm in height, with a wheelbase of 2700mm. It has a fuel tank capacity of 53 liters and features a 4-door, 5-seater sedan body structure. In terms of power, it is equipped with a 1.6-liter turbocharged engine delivering a maximum power of 140 kW and a maximum torque of 265 Nm. For suspension, this model uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.
Was this review help?
20
5
Share
EdenLee
08/11/25 8:16pm
I remember when driving the Fista, Sport mode was absolutely the one that unleashed the roar! The moment I switched to Sport, the engine's growl and backfire sound immediately filled the cabin, making it feel like sitting in a race car cockpit. In normal ECO or Comfort modes, the car is super quiet, perfect for commuting and saving fuel, but when Sport is activated, the sound noticeably intensifies. Official materials say it simulates this thrilling effect through speakers. Once on the highway in Sport mode, the sound was exhilarating, but I had to watch out for the slightly increased fuel consumption. I don't use it much for daily commutes to avoid disturbing the neighbors, but it's absolutely exhilarating for weekend mountain drives. The Fista's drive mode knob is very easy to operate—just switch back to Normal if the noise gets too much. In short, if you want that roaring experience, go straight for Sport mode without hesitation.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

Is the license plate mailed cash on delivery?

License plates are mailed cash on delivery, but it is not possible to track the logistics information of the license plate. You can only wait to receive the vehicle license plate. After the license plate is mailed, the vehicle owner will not be notified of the relevant logistics information. Generally, the license plate will be received within 4-7 days after mailing. Here is additional information about driving the vehicle while waiting for the license plate: 1. During the period when the license plate is being mailed, the vehicle cannot be driven. Once the formal license plate is selected, the temporary license plate of the vehicle will be invalidated, and driving the vehicle on the road will be considered as driving without a license plate. 2. After receiving the mailed license plate, it should be installed on the vehicle before the vehicle can be driven normally without any issues.
15
5
Share

How to Calculate the Vehicle Purchase Surcharge?

The vehicle purchase surcharge is 10%, and the payable surcharge amount = taxable price × tax rate. Here are the specific details about the vehicle purchase surcharge: 1. Definition: The vehicle purchase surcharge is a special fund collected by the state from vehicle purchasers (both individuals and entities) for highway construction. To accelerate highway development, alleviate transportation shortages, and establish a long-term stable funding source for highway construction, the state mandates that all vehicle purchasers, including government agencies and the military, must pay this surcharge. 2. Regulation: On October 22, 2000, the State Council promulgated the 'Interim Regulations of the People's Republic of China on Vehicle Purchase Tax,' stipulating that starting from January 1, 2001, a vehicle purchase tax would be levied on relevant vehicles, and the previous vehicle purchase surcharge would be abolished. Thus, the vehicle purchase surcharge, which had been collected by transportation authorities for 15 years, was replaced by the vehicle purchase tax administered by the national tax authorities.
6
2
Share

How to Fix the Random Jumping Issue with Excelle's Central Locking System?

If the central locking system of the Excelle exhibits random jumping, it is necessary to visit a 4S dealership to replace the door lock control assembly and the central control module. The repair cost is approximately 500 yuan. Below is more information about the central locking system: 1. What is a central locking system: The full name of the central locking system is Central Control Door Lock, which is an automotive component. Using this lock allows for remote opening and closing of doors without inserting the key into the lock. It consists of a door lock switch, an actuator, and a controller. 2. Functions of the central locking system: Central control - when the driver locks the door beside them, all other doors are simultaneously locked. The driver can open all doors via the door lock switch or open a single door individually. Speed control - when the vehicle reaches a certain speed, all doors automatically lock to prevent passengers from accidentally opening the doors by operating the door handles. Individual control - in addition to the door beside the driver, other doors are equipped with separate spring lock switches, allowing independent control of each door's opening and locking. 3. Basic principle of remote control: A weak radio wave is emitted from the owner's vicinity, received by the car's antenna. The electronic control unit (ECU) identifies the signal code, and the system's actuator (motor or electromagnetic coil) performs the lock/unlock action. The system mainly consists of two parts: a transmitter and a receiver.
4
1
Share

What Does a Car's Torque Represent?

Engine torque refers to the rotational force output from the crankshaft of an engine. Under a fixed power condition, it has an inverse relationship with engine speed—the faster the speed, the smaller the torque, and vice versa. This reflects the vehicle's load capacity within a certain range. Below is additional information: 1. Introduction: Similar to engine power, torque is one of the primary indicators of an engine, reflecting aspects of car performance such as acceleration, climbing ability, and suspension. 2. Benefits of Torque: The greater the torque, the better the car's operational response. Comparing vehicles with similar engine types, higher torque output results in greater load capacity, better acceleration performance, stronger climbing ability, fewer gear shifts, and relatively reduced wear on the car. Particularly during zero-speed starts, vehicles with higher torque demonstrate superior speed enhancement capabilities.
14
4
Share

What are the precautions during vehicle inspection?

When picking up and inspecting a car at a 4S dealership, pay attention to both vehicle inspection and document verification. Below are the relevant details about vehicle inspection during pickup: 1. Engine check: After cold-starting the engine, let it warm up for about 2 minutes. The engine sound should be smooth without any strange noises. Take a short test drive to ensure smooth gear shifting, no unusual body noises, and normal operation of electronic devices like air conditioning and audio. 2. Body inspection: The paintwork of a new car is applied by automated computer systems and should be flawless. If there is uneven protection or color differences in the paint, insist that the 4S dealership replace the vehicle. The interior should have no defects. After turning on the power, check all functions such as navigation, wipers, headlights, etc., to ensure they work properly. Test all buttons for smooth operation and verify that headlights can be turned on normally.
7
2
Share

What to Do If You Don't Know How to Drive After Getting Your License?

If you don't know how to drive after getting your license, here are some tips for beginners: 1. Familiarize yourself with basic vehicle operations: Before driving, make sure you thoroughly understand and memorize all basic operations, such as the functions of various buttons and how to operate the lights. Mastering these basics will prevent panic in critical moments. 2. Drive smoothly and slowly: For beginners, stability is most important. Maintain a slightly slower speed to give yourself enough time to observe and react. Avoid sudden acceleration, and always distinguish between the brake and accelerator pedals. Frequently check the rearview mirror to observe traffic behind you. Stay calm and flexible when encountering problems—don’t overestimate your skills or force awkward maneuvers. 3. Stay focused: Beginners must concentrate fully while driving. Avoid fatigue, distractions, or being influenced by surrounding vehicles. Do not answer calls or use your phone while driving. Safety comes first. 4. Drive on familiar routes: Stick to roads you know well. If your driving skills aren’t yet proficient, avoid experimenting with unfamiliar routes. New routes can be more dangerous for beginners, causing nervousness and increasing the risk of accidents. 5. Keep your foot on the brake: When not pressing the accelerator, rest your right foot on the brake pedal. Developing this habit ensures you can brake promptly when necessary, protecting yourself and avoiding mistaking the accelerator for the brake.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.